Can you link where you got the lift please rough county is telling me they do not make a lift for the pro4x but clearly you are installing one so if you could help I would appreciate it thanks
You have to buy them for the regular Titan. The reason they say it's not for the pro4x because you need longer rear shocks. I didn't install longer rear shocks yet but do plan on doing so.
2021 Nissan Titan Pro4X: I was hunting and got stuck pulling trailer w/2 atv's. I put the truck in 4wd (high) and got out. However, 2 miles later my 2021 Titan Pro4X stopped. I was in drive and pressed on the gas pedal and nothing. I put in reverse and the same thing. I was fortunate to be in the mountains near a cell phone tower. I called the dealership and was able to talk to a salesman who owned a Titan. He said to put the lever in neutral, and move the 2wd to 4wd high, and to 4ws lo. Now switch it back to 2wd. place the lever in reverse and then drive. After this it worked... Not sure if anyone has experienced this...
@@ueray4 Thanks Raymond, in the beginning I did not do the upper control arm as I went directly with Bilstein 6100's which has adjustable height settings. What I found out was the pressure, it was too much for the stock upper control arm and the spring was set on # 7 for the 2.2" lift you can get out of the shock. That also had the spring compressed. It was too much of a stiff ride. So what I did wind up doing, is go with a 2" inch spacer, and moved the adjustable ride setting on the Bilstein 6100 shock down to #1 which is stock settings along with RC's upper control ARM and the sway bar links for the increase in height. Ride is way-way smoother. Thanks again.
@@ueray4 I also noticed and believe you have your sway bar links installed incorrectly. The link should be going from the bottom towards the sway bar, yours is going from the bottom away from the sway bar. I believe the issue in installing those is clearly the pressure the sway bar is in. The easiest way was to remove the skid plate and losen the 4 bolts holding the sway bar, then uninstalling the nuts and bolts on the sway bar links, this will give you freedom to install them correctly. Cheers!
Hey, ive been watching your videos to try to install this on my truck. Ive only tried installing the rear so far. As soon as i lifted the truck up (i removed the u bolts and shocks first) The whole diff rolled forward and to the side. It took me hours to get it back to normal. How do i go about avoiding this issue and get the proper space i need to install the rear blocks?
I lifted the truck first and set it on tall jack stands. Then i put the jack on the diff. lifted it slightly and then removed the u bolts. After i slowly lowered the jack.
Is there a lift kit for this truck that makes it completely level? I prefer a lift kit over a leveling kit.
There is, check out cjd racing, or dirt king, there is some others too.
What kind of problems will this cause, lifted?
Maybe just put longer rear shocks
Can you link where you got the lift please rough county is telling me they do not make a lift for the pro4x but clearly you are installing one so if you could help I would appreciate it thanks
You have to buy them for the regular Titan. The reason they say it's not for the pro4x because you need longer rear shocks. I didn't install longer rear shocks yet but do plan on doing so.
Thank you so much do you know what size shocks to get for the rear
I also have a 2023 but I’m pretty sure it’s the same is that correct I’m sorry for so many questions I’ve been trying to find a lift for a while
Also I would love to see your truck finished if you could do another video
So you can use these More Info for BILSTEIN 24186766 these are 25" extended
Or rancho rs999304 these are 27" extended
Do you still have that Titan?
I have a 23 Titan XD now.
@@jovanysmechtronixs3811 nice! I'm thinking about getting one, are they a good truck?
@@tl8885 to me they are the best bang for your $$, more reliable than the big 3
@@jovanysmechtronixs3811 thanks!! I'm looking for a good deal, trucks are so expensive now
@@tl8885 I got mine with 0%apr so they have some great deals right now
I have a platinum titan, do i need to replace the shocks to do this lift? i just do mild off roading, get into fishing, hunting spots etc...
You don't have to unless you want more travel
3 inch lift we can use 33 inch tire ok ?
Yes even a 34" with the lift.
Looks awesome! Do you know if this lift kit works for 2022 pro 4x?
Pathfinder?
@@jovanysmechtronixs3811 titan
Yes it does but you should consider getting a longer rear shock if you're doing a lot of off roading
Regrets yet or no on not going with the RC n3 shocks
No regrets yet
@@jovanysmechtronixs3811 I did the same kit with RC shocks and no issues about 20k on truck so far
2021 Nissan Titan Pro4X:
I was hunting and got stuck pulling trailer w/2 atv's. I put the truck in 4wd (high) and got out. However, 2 miles later my 2021 Titan Pro4X stopped. I was in drive and pressed on the gas pedal and nothing. I put in reverse and the same thing. I was fortunate to be in the mountains near a cell phone tower. I called the dealership and was able to talk to a salesman who owned a Titan.
He said to put the lever in neutral, and move the 2wd to 4wd high, and to 4ws lo. Now switch it back to 2wd. place the lever in reverse and then drive. After this it worked...
Not sure if anyone has experienced this...
Everything good now?
No me yet thankfully
I must say I have 2023 titan pro4x and so far I absolutely love it I used to be a Ford guy not anymore
That's what they all say haha. Glad you're enjoying it.
Transfer case got stuck between high and low it sounds like.
I have a 2017 Titan pro x and wanted to get this lift kit as well, but I noticed that the website says that it doesn’t fit. Is there a reason for it?
Rear shock
Can someone honestly comment on the ride quality. I did a one inch in the rear and 2" spacer on front and ride got very stiff.
I have 3 inch front and ride really bad
I was going to ask the same question
This is my truck in the video. The truck rides just fine. I took it off roading snd no issues
@@ueray4 Thanks Raymond, in the beginning I did not do the upper control arm as I went directly with Bilstein 6100's which has adjustable height settings. What I found out was the pressure, it was too much for the stock upper control arm and the spring was set on # 7 for the 2.2" lift you can get out of the shock. That also had the spring compressed. It was too much of a stiff ride.
So what I did wind up doing, is go with a 2" inch spacer, and moved the adjustable ride setting on the Bilstein 6100 shock down to #1 which is stock settings along with RC's upper control ARM and the sway bar links for the increase in height. Ride is way-way smoother. Thanks again.
@@ueray4 I also noticed and believe you have your sway bar links installed incorrectly. The link should be going from the bottom towards the sway bar, yours is going from the bottom away from the sway bar. I believe the issue in installing those is clearly the pressure the sway bar is in. The easiest way was to remove the skid plate and losen the 4 bolts holding the sway bar, then uninstalling the nuts and bolts on the sway bar links, this will give you freedom to install them correctly. Cheers!
Did you have to grind the front strut hat?
Just a little
Did you do a front diff drop?
Nope
Nice work truck looks great!
Thanks
Nice work! Is this just the RC 3 in kit with no strut series or shocks add ons. Just installed with what comes in the basic kit
Yes sr. This is the basic kit.
Diesel or gasoline?
This is a gasoline
These trucks don't do so well lifting with spacers do to toe angle changes
Hi there, I fixed the toe angle with the alignment.
Are those stock fender flares? If not where did you get them?
Lets go Brandon
Yes those are stock on the pro4X
Hey, ive been watching your videos to try to install this on my truck. Ive only tried installing the rear so far. As soon as i lifted the truck up (i removed the u bolts and shocks first) The whole diff rolled forward and to the side. It took me hours to get it back to normal. How do i go about avoiding this issue and get the proper space i need to install the rear blocks?
I lifted the truck first and set it on tall jack stands. Then i put the jack on the diff. lifted it slightly and then removed the u bolts. After i slowly lowered the jack.
Kdo chingona..chulada.
Gracias
💯👍👌
💪