I just got a 2022 RG special and have ordered standard bags as well as a 2 into 1 exhaust. I have all of the custom dynamics stuff for the rear waiting to go on including a mini tail light. Thanks for posting this video as it was extremely helpful.
I like Ciro lighting for the filler panel better because it covers the bottom where the galvanized bolts are left and right . All in all the bike looks great
Great Job but have a question. It your previous video you got rid of tribal light and installed that jumper harness. Where you went to the filler lights do you still need to run that jumper harness? looked light the whole factory harness that goes down there is no longer needed
Good job on getting rid of the tri bar. I've got a 2020 road Glide, The first thing I did was get rid of the stretch bags. Now you have inspired me to get rid of my tri bar And go with the custom dynamic lights.
Great looking lights! my only concern is, they might me be a little too recessed behind the bags from a side view making it hard for drivers changing lanes to see you braking.
The slow creep to full-on performance Bagger is on. You’ve taken a slice from Moto America or been watching too much M. Bertini. Whatever. Always thoughtful clean choices in your renderings. Nice Doo.
Looks great! Very clean. I have a 22 SG ST, it has the tailight and light bar, so have been looking for a way to eliminate the light bar and replace the turn signals. Thanks.
super sick. clean look, i did an electra glide fender with a Moons Mc LED light and curved plate holder. i kinda like your way better.. haven't seen that out here yet..
If I have filler lights from factory, does the splice still work the same? Unfortunately on my 23 RGST it has the center light, the bar, and fillers from factory. Trying to remove the bar and figure out if I can splice into factory fillers.
I noticed you didn't have a brake light on top of your turn signal bracket. Mine does. Will the plate frame cover up the hole that is used to mount my factory brake light as well or just the turn signal bracket?
Im a little late to the party on this one, but liked the video. Did that filler lights get rid of the plug that you used for the lasy video on the tribar light? Sounds like that entire wire set is not used now.
Hey bro love the vids. I was wondering what you do with all those black factory parts you take off your bike. I was wondering if I might be able to buy them from you for my 2022 road glide standard. I’m trying to black out my bike with some parts slowly. I’m interested in the rear tail lights you took off and the floor boards and the black crash bar. Thanks
I just bought the filler lights for my road glide. I already deleted the tri bar I’m very confused because the guy at the shop was telling me I need all kinds of harnesses. Do I need to delete the license plate? do the filler lights have all the wiring I need I already bought the TRI delete harness adapter
What license plate frame is that? Just got my bike back, they changed the fender to a lower profile version but I have no holes for license plate frame or anywhere to add a license plate
@@DOOWORKMOTORSPORTS ok, thanks for the reply! I'm going to do exactly what you did on my 2013. The whole back of my bike is converted to the Rushmore parts
I can’t understand why they can’t come up with a solution for the three holes in the fender? I know they kinda hidden in there but that is a deal breaker for me.
I have a 22 road glide st.. thus won’t work fir it right?? I called custom dynamics Abc grey said they don’t make a kit yet.. I want to get rid of my tail light
Did you get the eclipse module to have brake as well? I’m only getting brake out of my stock taillight and not the fillerz. Seems I need that module I guess.
No, if you aren't running the stock taillight, you don't need the custom dynamics splitter. You only need that harness if you are keeping the stock taillights.
@@DOOWORKMOTORSPORTS I’m doing a full delete if stock light bar and only using fillerz for run/brake/turn. I thought the splitter that it comes with is needed for plugging in left and right fillerz?
@@DOOWORKMOTORSPORTS is the power being white a harley thing? Because I've always thought white was the common/ground and the black being the power when dealing with electrical.
That makes two of us (re: I'm stoked too!). Looks awesome; clever! I watched your previous video and was wondering what you would come up with to fill in the elongated openings that were visible once the Tri-Bar piece was eliminated. Again, looks darn nice. Good job. Thanks for making this video. PS: Front fender? IMO, the stock front fender from a 2022 RG-ST/SG-ST (in black) would complete the Performance Bagger look. Earlier today, I ordered the HD colored-matched (Snake Venom) wrapped fender (19") for my '21RGS. Tom M., Hawthorne Ca. '21RGS & '22FXLRS
I just got a 2022 RG special and have ordered standard bags as well as a 2 into 1 exhaust. I have all of the custom dynamics stuff for the rear waiting to go on including a mini tail light. Thanks for posting this video as it was extremely helpful.
What 2 into 1 exhaust did you order?
I like Ciro lighting for the filler panel better because it covers the bottom where the galvanized bolts are left and right . All in all the bike looks great
Great Job but have a question. It your previous video you got rid of tribal light and installed that jumper harness. Where you went to the filler lights do you still need to run that jumper harness? looked light the whole factory harness that goes down there is no longer needed
If you run these filler lights, the jumper harness is no longer needed..
Good job on getting rid of the tri bar. I've got a 2020 road Glide, The first thing I did was get rid of the stretch bags. Now you have inspired me to get rid of my tri bar And go with the custom dynamic lights.
Everything black and smoked looks Great
When you put the tape on use a tie wrap around the tape or it will come off in time. 👍
Great looking lights! my only concern is, they might me be a little too recessed behind the bags from a side view making it hard for drivers changing lanes to see you braking.
I agree that was my first though I think I’d want to add some other light as well for a side view
Latch lights!
Nothijg like the CVO lights. Cvos this year seem to got worse but we will see
no its so bright it reflects off the inner bag, 100 %
Great observation. I would rather have visibility than cool. I like my original pro beam tail lights. They work just fine.
Dope ! Just did this on mine wish I would have seen your video struggled a bit with the white/black for the plate on a good way to splice it in
The slow creep to full-on performance Bagger is on. You’ve taken a slice from Moto America or been watching too much M. Bertini. Whatever. Always thoughtful clean choices in your renderings. Nice Doo.
I’ve been eyeballing that license plate mount for my Street Glide. That looks great!
Looks great! Very clean. I have a 22 SG ST, it has the tailight and light bar, so have been looking for a way to eliminate the light bar and replace the turn signals. Thanks.
I just did the same pro beam light and license plate from custom dynamics for my CVO. Lookes Killer Can’t wait to see what’s next.
Well there you go again another great how to video making your bike look Different for a new season of riding nice job
Awesome, and love the links to the products.
Been looking for this set up.
You make it easy for us older guys trying to spice our RG 😁👍
super sick. clean look, i did an electra glide fender with a Moons Mc LED light and curved plate holder. i kinda like your way better.. haven't seen that out here yet..
If I have filler lights from factory, does the splice still work the same? Unfortunately on my 23 RGST it has the center light, the bar, and fillers from factory. Trying to remove the bar and figure out if I can splice into factory fillers.
I just picked up my new Road Glide ST and I ordered this kit super pumped! Cool vid
Sweet! Congrats! Thanks!
I'm doing the same thing tomorrow. Can't wait. I think some Santoro crash bars and a stainless pipe would set your bike off.
I noticed you didn't have a brake light on top of your turn signal bracket. Mine does. Will the plate frame cover up the hole that is used to mount my factory brake light as well or just the turn signal bracket?
Im a little late to the party on this one, but liked the video. Did that filler lights get rid of the plug that you used for the lasy video on the tribar light? Sounds like that entire wire set is not used now.
Yes it did. You are correct.
That was a great install video!
You would think they would have a plug port on a twilight to plug in he plate light or something where you don’t have to hack up a new set of lights
How easy would it be to remove these purchased a 16RK with chrome Smoked fillerz and I don't like them want to remove them.
What’s the part number for the turn signal eliminator bracket?
I’ve had them since 2020 Sturgis, glad I got them. Are the ohlins suspension really worth it?
Build is coming along nicely. Awesome job!
And the bag lights for more rear end safety to be seen more
did you remove the input wire that came from the main harness to the back ? And used the supplied one by custom dynamics one?
Yes.
Hey bro love the vids. I was wondering what you do with all those black factory parts you take off your bike. I was wondering if I might be able to buy them from you for my 2022 road glide standard. I’m trying to black out my bike with some parts slowly. I’m interested in the rear tail lights you took off and the floor boards and the black crash bar. Thanks
I'm going to keep the stock parts for now..
@@DOOWORKMOTORSPORTS right on thank you for the reply and your videos
Can you use these parts only to delete the tri bar as well or do i need the tri bar delete plugs?
WHATTTTTT. YOUR DRIVING A TRAIL BOSS.
For now, yes lol I needed a tow vehicle to go to Daytona Bike Week. I will be making a garage update video soon..
Can you run those custom dynamics lights with the stock tail lights?
You could if you remove your tri-bar..
I just bought the filler lights for my road glide. I already deleted the tri bar I’m very confused because the guy at the shop was telling me I need all kinds of harnesses. Do I need to delete the license plate? do the filler lights have all the wiring I need I already bought the TRI delete harness adapter
You only need the tri-bar delete harness if you are keeping your stock tail lights. If you are running the filler lights you don't need the harness.
I like this set-up
Looks great dude! Love this look. Definitely giving me ideas for my next bike 🤔
Good look, however splicing wires is a thing of the past. Ciro makes this product without cutting wires. Still looks good and good install.
What license plate frame is that? Just got my bike back, they changed the fender to a lower profile version but I have no holes for license plate frame or anywhere to add a license plate
Custom Dynamics
@DOOWORKPRODUCTIONS any specific one?
Looks awesome. Are you going to put a shorter muffler?
I think I'm going to modify this pipe to be flush with the saddle bag, I don't want to run a shorty pipe and lose HP..
@@DOOWORKMOTORSPORTS I only asked as it looks a little odd protruding so far past the bag on a performance bagger.
@@joesbuell Yeah, I'm going to work on that lol
Did you have to use the stabiliser for this?
Did u still need the tribar light delete harness with doing the filler lights? And deleting the stock light entirely?
No, I did not. I ended up sending that part back.
@@DOOWORKMOTORSPORTS ok, thanks for the reply! I'm going to do exactly what you did on my 2013. The whole back of my bike is converted to the Rushmore parts
I can’t understand why they can’t come up with a solution for the three holes in the fender? I know they kinda hidden in there but that is a deal breaker for me.
Very helpful, thanks for sharing!
I have a 22 road glide st.. thus won’t work fir it right?? I called custom dynamics Abc grey said they don’t make a kit yet.. I want to get rid of my tail light
These fillerz will work on a new ST..
Hey bud are these run lights as well?
Yes!
Did you need to splice any wires just gor the fillers?
How the hell did you get the three bolts on the left and right side of the rear fender off off mine are stuck to a backing plate
Took some finnessing. They weren't easy.
Help! I installed mine and I don’t have any brake out of it… I still have the stock brake light on the back of my ST
Did you get the eclipse module to have brake as well? I’m only getting brake out of my stock taillight and not the fillerz. Seems I need that module I guess.
Where did you get that carbon license plate bracket?
I ordered it online, but I would sell you it if you want it. I am currently running a curved bracket now with my new setup.
Love the videos. Looks great.
Looks great. Are you going to keep the full length exhaust or do a mid length?
Going to keep the full length. I would lose HP with a shorty pipe..
@@DOOWORKMOTORSPORTS can’t have you doing non straight wheelies on that long pipe 🤣
@@dwight072 LOL I think I am going to cut the pipe so that it is flush with the saddle bag..
Anthony, you removed the entire stock rear harness given the full delete and therefore the supplied Custom Dynamics splitter has an open end, correct?
No, if you aren't running the stock taillight, you don't need the custom dynamics splitter. You only need that harness if you are keeping the stock taillights.
@@DOOWORKMOTORSPORTS I’m doing a full delete if stock light bar and only using fillerz for run/brake/turn. I thought the splitter that it comes with is needed for plugging in left and right fillerz?
@@SJBagger Under the seat - Yes. Under the rear fender - No.
@@DOOWORKMOTORSPORTS got it, thanks.
Beautiful looks really good 👍
Did you still need the Tribar adapter connected to work the lights?
Nope.
I’m copying you and doing the exact same light setup in the rear. Lol my only question is what did you do with the radio antenna?
I removed it. I never use my AM/FM radio...
@@DOOWORKMOTORSPORTS do you have to remove the fairing cover to fully delete the antenna?
@@xaviercbivens No
What type of lift / jack are you using to raise your Road Glide off the floor? Great vids BTW!
Its a Craftsman Jack.
Thanks man 👍🏻
Will these fit a 2019 Streetglide standard if I delete tribar and filler panel?
Yes
Another great video 👍🏽
Is there anyway of installing those without removing the tri-bar ?
Not unless you cut the plastic piece that the Tri-Bar is attached to..
Man that’s a killer look
Looks good, just not a fan of 1 pipe on the back of a bagger, I took off mine when I got it, switched to Reinhardts…
White is power and black is ground...? You sure about that?
Yeah, I mean they work lol
@@DOOWORKMOTORSPORTS is the power being white a harley thing? Because I've always thought white was the common/ground and the black being the power when dealing with electrical.
@@llcoolrell No, Black is usually ALWAYS Ground..
What did u wind up doing with the tri bar eliminator harness?
I returned it because it wasn't needed anymore.
So what did you with your TRI BAR Eliminator harness?
I sent it back..
Love this set up!
Looks good bro 💪🏾💪🏾💪🏾
If you had t bars our bikes would be so similar
where did you find the standard bags
Amazon!
What did u do with antenna
Removed it
Well done!!
Where did you get your shocks??
I got them installed at the Ohlins booth down in Daytona at Bike Week this past March.. You can buy them anywhere online though.
what bars are those?
FXR Division Motorwitch Bars. 12"
How are yoy liking those bars after all this time?
I like them!
Brother, love this upgrade!! Definitely smoothes out the back for a slick look! Outstanding 👌
That makes two of us (re: I'm stoked too!). Looks awesome; clever! I watched your previous video and was wondering what you would come up with to fill in the elongated openings that were visible once the Tri-Bar piece was eliminated. Again, looks darn nice. Good job. Thanks for making this video. PS: Front fender? IMO, the stock front fender from a 2022 RG-ST/SG-ST (in black) would complete the Performance Bagger look. Earlier today, I ordered the HD colored-matched (Snake Venom) wrapped fender (19") for my '21RGS. Tom M., Hawthorne Ca. '21RGS & '22FXLRS
Thats awesome! I might go with that fender as well.. However, I do still like the look of the stock fender. I am tied on what to do right now.
🔥🔥🔥
The lights look great, but I really would have liked to see a the wiring for the LED plate light. I learn better with visual, rather tgan descriptive.
I just spliced them into the running lights on the tail lights so that the license plate light comes on with the running lights.
NICE WORK!!
Are the indicators amber or red?
Red
Will this work on a 2016
Yes.
Looks great
Nice
Lookin sharp !
Don't like the regular bags. Stretched bags were a selling point for my 2019.
Nice.
❤🔥
Good stuff! Are you connected with Amsoil Adam here?! He’d love your content.
Fucking sick
Just can’t like looks of I muffler on touring bikes sorry
What did you did with the existing wire that was connected to the tribar harness??
Did you splice into the splitter that the filler lights come with ?
Yes.
@@DOOWORKMOTORSPORTS thanks bro i didn’t hook up my rear plate yet those wires are thin i gotta get a better splicing tool.