DIY 2014 -2018 Chevy Silverado Ac Condenser replacement. Step by step

Поделиться
HTML-код
  • Опубликовано: 25 авг 2024
  • 2015 Chevy Silverado 1500 Common ac issue and how to fix it. step by step video on how to replace an ac condenser and where the common issue is and leak.

Комментарии • 23

  • @POW2000
    @POW2000 6 месяцев назад

    Don't forget to add PAG oil... about 2oz...add to the condenser low side port...

  • @alexandermedina3502
    @alexandermedina3502 3 года назад +2

    how do you clean the vacuum! o the AC LINES?

    • @blobeyetv5684
      @blobeyetv5684  3 года назад

      I have a guy that has a machine to completely flush it

  • @pradysko19
    @pradysko19 Год назад

    New condenser come with drier, right?

  • @ashleycarter9717
    @ashleycarter9717 2 года назад +3

    If Gm would recall the condensers and back window paint peeling I’d like gm a bit better

  • @chriswatts2096
    @chriswatts2096 2 года назад +2

    Pretty much a good video pretty much.

  • @bac4998
    @bac4998 4 года назад +2

    Where did you the new condenser and how much?

  • @elliotcobb6155
    @elliotcobb6155 4 месяца назад

    How come none of these videos show how to put the oil in the condenser

    • @JoeRyco
      @JoeRyco 2 месяца назад

      Just pour it into the condenser buddy. Make sure you dont pour it into the transmission side of the condenser. 1.5-2 ounces should be good PAG46 liquid oil in a white bottle from autozone for a 2014-2015

  • @javierguerra82
    @javierguerra82 3 года назад

    I’m about to do this myself but question. After you install the new condenser do you have to vacuum immediately right after? I’m asking because I’m thinking of changing the part and taking to a shop to vacuum and recharge.

    • @blobeyetv5684
      @blobeyetv5684  3 года назад

      No you do not, A/C shouldnt kick in if its not recharged, meaning it wont harm anything untill you vaccum and recharge it with freon

    • @923matthew
      @923matthew 2 года назад

      You must need to bring to the shop! Doing AC by yourself at home is no way

    • @anonymouswalrus7637
      @anonymouswalrus7637 Год назад

      @@923matthew you can do AC at home if you know what you’re doing. It’s easier to recharge with a machine but you can charge it with a manifold gauge set the old school way.

  • @beanzchevy9272
    @beanzchevy9272 3 года назад +3

    Did ur new condenser come with pag oil. Did u have to add some if so where and how. I have the Sam problem ordered new condenser but it doesn’t come with lubricant

    • @blobeyetv5684
      @blobeyetv5684  3 года назад

      I made sure i bought the same exact as the oem to make sure everything fit

  • @andrewjordan7671
    @andrewjordan7671 3 года назад

    Did you have any trouble connecting the lines back to the new condenser at the top on both sides?

    • @blobeyetv5684
      @blobeyetv5684  3 года назад

      went in a little hard but that's normal since the seals have to sit and seal properly. once it snaps in over the clip, you are good!

    • @c6175m
      @c6175m Год назад

      Can you show how to out pin back together

  • @923matthew
    @923matthew 2 года назад +1

    You are destroying the atmosphere by releasing the Freon from the AClines. You must have to use AC system to do so’🤯

    • @user-kq4fd1yf5s
      @user-kq4fd1yf5s Год назад +2

      News flash stupid all the Freon had already leaked out ! Hence replacing the condenser!

    • @clydejr6065
      @clydejr6065 Год назад

      I know right mine already leak out.!!!

    • @adamswiger9499
      @adamswiger9499 3 месяца назад

      I'm calling Joe Byron