Hydraulic press with jack 20t
HTML-код
- Опубликовано: 3 фев 2024
- The time has come to build a hydraulic press, which I have been missing for a long time for my work.
I decided to do it as cheaply as possible, so I used material I had lying around in the garage.
I used a 20t lift as the actuator. Наука
Nice and sturdy! The drilling must have taken ages.
To chyba najprostszy film jak zrobić prasę😂 aż chyba sobie zrobię. Fajnie pokazałeś przeróbkę podnośnika 💪👌
hi, great build! thanks for sharing. the nuts on the bolts that support the head are not seated square, this will put the bolts in bend not tension and will fail. if possible change for long bolts that span across the top.
I was wondering how you made the jack work upside down. Clever!
Thank you
Beauty
Thank you
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you