The outtakes are the best. Rock lights are always cool. I was thinking to put a kill switch for security and I never saw anyone do it yet. There must be some out there. Cheers!
I have this same MLC system. I love it, gets the job done. Is a very easy install and, most importantly, is a very affordable alternative to some of the other brands.
RC did not take into consideration a Jeep with manual transmission. The grommet used to fish the wiring harness through the firewall is taken up by the clutch system. Epic fail on the part of RC! Either you have to dig out the battery, tray, fuse box, aux battery and poke a hole through the existing rubber grommet on the passenger side (good luck) or, fish the wiring harness up and behind the gauge cluster, out and through the windshield and its foam insulation, down the cowl, through the hood foam and along the AC plumbing.
Thanks for the video. Helped me a lot. I wish you had shown the order you put the wires back on the new switches. I have some ordered and going to install the system this weekend. Going to use the two new switches for ELockers . Want to get it right the first time. Perhaps when I get the switches it will be obvious.
if you could do a video about how to add aftermarket power window & door lock kits to the Sport version, a lot of the sport guys will go wild to your channel
Bro LOVE IT! love the custom switches. I stayed with the normal switches, I too had an issue with the cap in the fire wall. i had to come from inside and twist it. but love the videos!
@@adventuredex wow i cant bealive you have 70k subs now the last time i watched i think had about 40k or 5k i cant wait for the new vid when is it coming i dont know that much about the channel now i do but i love it
@@adventuredex yeah i really enjoy the vids its kinda nostalgic i mean i don't even have a jeep but i want one in the future watching these videos feels like 2018
Cool work I don’t know if I want to put the amber lights on switch but I really like them I’m just wondering if they have the same thing for JK and for a gladiator JT 2021
You’re such a good sport. If I had taken hours to figure out what was on the back of the instruction manual the whole damn time, I would’a broke some isht up, for real.
Have you checked out the Quadratec LED Interior Mount 50” Stealth Light or the Oracle Lighting 5861-504 Sidetrack Fender LED Lighting System. Both would look great on that JL.
Someone should make something for the JK where that little useless net is in the center of the dash instead of putting it above the windshield or the A-Pillar but definitely love the look of the custom switches over the the stock rockers. First lights have to be a set of KC HiLiTES Flex Era 4's would look killer on the front of this, they are little pricey but are great too!
dam bro rough country just took us back to the stone age with that design. i was checking out the MLC but went with the Voswitch flat panel display on my JK, looks way better in my opinion. sorry if your sponsored by RC, just my opinion.
Between watching this video and your push button start video. It should be possible to rig one of the switches to be your engine start switch, correct?
Do you just put the wires back the same way they came off the old switched ??? On to the Custom ones ordered same ones you didn't add you putting them back
I installed the MLC-6 and it's "really cool" my guy. The next step I am trying to take is installing the custom switches. The video does show the wiring for this. Can you shed some light? I noticed the stock comes with 3 prongs but the one I have only has 2.
Adventuredex I try to send you a message on Facebook to get more information on this video. I ordered the switches and I noticed the wiring diagram is not on the original RC switches, so I don't know how to rewire them backup on the new switches. I paused the video at exactly 9 minutes and it looks like The 1st row on top are the wiring That was in the middle row of the original wiring set up, and the 2nd set of the wires, I believe are the red wires and the 3rd set of wires should be the green ones I believe, and i think they are going to the probg that's buy itself at the top of the switch.. Is there any way to do another video showing the wiring because I even see a wire that looks like it was extended and I'm trying to do this on my own and I don't want to screw it up thanks a million.also hope all is well because you haven't posted a video in almost a year stay safe.
I installed mine and the switches only work when I start my jeep not in acc. Is this a problem? Is there something in this mcl-6 kit that prevents it from draining the battery?
Hey Dex I’m getting closer to my first Jeep! Wooohooooo! What is your opinion of the 2.0 engine? I’ll be pulling a 19’ center console boat. Is the 2.0 strong enough for that? Thanks bud!!
Hey! I stopped using it because it was giving me some issue. Apparently, there has been several updates to the system but I haven’t gotten the new one. Hope that helps
Bro I want to ask you for something!! I want to buy JL but the adaptive cruise control in jeep Too expensive so can I buy a Wrangler without this system and then when I have money, can I buy this system and put it on my Wrangler ?! Please, I want to know, can I do this?
Good morning, you should only need a positive and negative to the control module. Similar to the sPOD unit. So far, I am adding a Mopar four switch module. Other options include sPOD, Voswitch, and others.
Dex Loving Your vids as usual,but u didn't post where to get the orange switches.I ordered the mlc-6 already. My Jeep build is coming along great thanx to your videos. Keep up the good work. I want moreeee videos lol
Sorry Dex but I had to laugh when you said Rough County thought that system through. Yeah, they thought it through when they copied SPOD 😆. Either way nice install video brother.
Did what I did, buy some oem jeep led headlights and buy some rgb kits for them from oracle lights, the video they have sucks btw, I had to dremel to get the lens to come off but they look clean and I can change with my phone
im at around 7 minutes in.. and i gotta say.... hopefully the directions/plugs for that are backwards... cause i'm sorry but that is extremely stupid to have a water proof connection... on the INSIDE of the cab... where ya know, no water should ever be... and the non-water proof connection goes into the engine bay where there's a pretty high chance of it getting wet... specially for those who have a snorkel and shove their front ends under the water on occasion...
![Installing the MLC-6 on a Jeep Wrangler JL [by Rough Country]](http://i.ytimg.com/vi/W9Fsl1ARcCY/mqdefault.jpg)
![Installing the MLC-6 on a Jeep Wrangler JL [by Rough Country]](/img/tr.png)
I always thought “RC” stood for Rough County, but on this channel, all “RC” installations stand for “Really Cool”!!!! 👍👍👍
Haha!!! 😃😃
I wannted to add a mod for my JK
Can u share ur contact num
Where did you buy the switches? Thanks!
Pretty convenient switch system, also bloopers at the end crack me up!
🤣🤣
Great video! I thought the amber toggle switches are really cool too. Mind provide a link to the switches as well?
I’ve been wanting this system for a while, you made the install look so easy I’ve got to get it now
Glad you found the video helpful! That’s what I am here for!
The outtakes are the best. Rock lights are always cool. I was thinking to put a kill switch for security and I never saw anyone do it yet. There must be some out there. Cheers!
Thanks for the suggestions and for the support 🙌🏼🙌🏼 JeepWave
When you say kill switch for security do you mean like an instant switch that kills all your aux lights ?
I have this same MLC system. I love it, gets the job done. Is a very easy install and, most importantly, is a very affordable alternative to some of the other brands.
Totally agreed!
I work at my airbags, I just packed up your order. Pretty damn cool to see it goin on RUclips soon!!
No way! That’s awesome 🙌🏼🙌🏼
@@adventuredex it will ship out at 4😂😂
Can’t wait!!
sweet video... my 2020 came with auxiliary switches from the factory ...
Lucky!
With Out a Doubt... Adventure Dex .... Rock Lights 👍😃
Thanks for the suggestion! Definitely a must have 👌🏼
Are the switches from lighthouseled the same? I bought some from Amazon and the terminals are diff. Can you link the switches?
RC did not take into consideration a Jeep with manual transmission. The grommet used to fish the wiring harness through the firewall is taken up by the clutch system. Epic fail on the part of RC!
Either you have to dig out the battery, tray, fuse box, aux battery and poke a hole through the existing rubber grommet on the passenger side (good luck) or, fish the wiring harness up and behind the gauge cluster, out and through the windshield and its foam insulation, down the cowl, through the hood foam and along the AC plumbing.
Thanks for the video. Helped me a lot.
I wish you had shown the order you put the wires back on the new switches. I have some ordered and going to install the system this weekend. Going to use the two new switches for ELockers . Want to get it right the first time. Perhaps when I get the switches it will be obvious.
Very nice Dex . Amber Fog lights
Absolutely!
if you could do a video about how to add aftermarket power window & door lock kits to the Sport version, a lot of the sport guys will go wild to your channel
Can you shoot the link for the aux switches? Great video btw
Did u find the switches?
Do you have a link for those custom switches?
Very good videos - keep them coming - get a few in there with mounting AR15's in a Jeep
Bro LOVE IT! love the custom switches. I stayed with the normal switches, I too had an issue with the cap in the fire wall. i had to come from inside and twist it. but love the videos!
Thanks Mark! I also appreciate the tip!
@@adventuredex no worries. Hey can you recomend any covers for the roll bars for the JL
Wish I could but I don’t know any! Sorry
ive watched this video multiple times. im HIGHLY considering picking this up.
Update: just ordered :)
🙌🏼🙌🏼🙌🏼🙌🏼
yoy im an og lol been watching for three years
🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
@@adventuredex wow i cant bealive you have 70k subs now the last time i watched i think had about 40k or 5k i cant wait for the new vid when is it coming i dont know that much about the channel now i do but i love it
Thank you!! I really appreciate the support 🙌🏼
@@adventuredex yeah i really enjoy the vids its kinda nostalgic i mean i don't even have a jeep but i want one in the future watching these videos feels like 2018
Cool work I don’t know if I want to put the amber lights on switch but I really like them I’m just wondering if they have the same thing for JK and for a gladiator JT 2021
JT yes but JK no unfortunately. Thanks for watching!
You’re such a good sport. If I had taken hours to figure out what was on the back of the instruction manual the whole damn time, I would’a broke some isht up, for real.
😆😆 i may have smashed a few things
Dex, JL is looking great bro, keep the great videos coming, and keep on Jeeping, take care Dex
Thanks victor! Glad your enjoying 👌🏼
Have you checked out the Quadratec LED Interior Mount 50” Stealth Light or the Oracle Lighting 5861-504 Sidetrack Fender LED Lighting System. Both would look great on that JL.
brilliant job bro
Thank you 🙏🏼😃
SPod is the way to go !
Bud.. u r my inspiration for jeep.. I brought a jeep just seeing ur vlogs...
🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼 thanks for the love and support! Enjoy your Jeep
Hi, I’m thinking about installing this on my JLU. Do I need to flash my computer for this switch to work ?
Thanks in advance and keep on Jeeping !
No these are completely independent
@@adventuredex thank you!
Where did you get the toggle switches? Most that I'm finding only have two pins rather than three.
Someone should make something for the JK where that little useless net is in the center of the dash instead of putting it above the windshield or the A-Pillar but definitely love the look of the custom switches over the the stock rockers. First lights have to be a set of KC HiLiTES Flex Era 4's would look killer on the front of this, they are little pricey but are great too!
Yah agreed!! Thanks for the suggestion!!
This is awesome Adventuredex!
I have the factory ones but I like your high top fender flares! Where did you get them!
dam bro rough country just took us back to the stone age with that design. i was checking out the MLC but went with the Voswitch flat panel display on my JK, looks way better in my opinion. sorry if your sponsored by RC, just my opinion.
Not sponsored by RC, I love the feedback!
Some rock lights would be cool.
Agreed coming right up!!
Between watching this video and your push button start video. It should be possible to rig one of the switches to be your engine start switch, correct?
I would like to see a video where you install some rock lights
Do you just put the wires back the same way they came off the old switched ??? On to the Custom ones ordered same ones you didn't add you putting them back
Wow! Seven bolts to hold the plastic cubby in place! We wouldn't want that to rattle.
🤣🤣
Orange switches 👌
Nice!! Thanks for sharing!
Very welcome!
I installed the MLC-6 and it's "really cool" my guy. The next step I am trying to take is installing the custom switches. The video does show the wiring for this. Can you shed some light? I noticed the stock comes with 3 prongs but the one I have only has 2.
All depends on which switches you use. The wiring should be the same 👍🏼
You should do a tool review or something and show us all your tools man and the tool box. That’d be cool
Thanks for the suggestion!!
I like the stock RC switches🙈
Yah they are slick!
“you know I have to make easy installations difficult” ~ Adventure Dex
😅😅😅😅😅😅
Where did you buy the switches? Thanks!!
Adventuredex I try to send you a message on Facebook to get more information on this video. I ordered the switches and I noticed the wiring diagram is not on the original RC switches, so I don't know how to rewire them backup on the new switches. I paused the video at exactly 9 minutes and it looks like The 1st row on top are the wiring That was in the middle row of the original wiring set up, and the 2nd set of the wires, I believe are the red wires and the 3rd set of wires should be the green ones I believe, and i think they are going to the probg that's buy itself at the top of the switch.. Is there any way to do another video showing the wiring because I even see a wire that looks like it was extended and I'm trying to do this on my own and I don't want to screw it up thanks a million.also hope all is well because you haven't posted a video in almost a year stay safe.
Yea same the 12 v switched don't not work to big not Sure why he said. That's what he used and the wiring. He didn't include because it doesn't work
I installed mine and the switches only work when I start my jeep not in acc. Is this a problem? Is there something in this mcl-6 kit that prevents it from draining the battery?
Hey Dex I’m getting closer to my first Jeep! Wooohooooo! What is your opinion of the 2.0 engine? I’ll be pulling a 19’ center console boat. Is the 2.0 strong enough for that? Thanks bud!!
Bro, how is the remote start working on ur jk? Is it still in good shape without any issues? I am planning to fix it on my jku. Can u suggest pls
Hey! I stopped using it because it was giving me some issue. Apparently, there has been several updates to the system but I haven’t gotten the new one. Hope that helps
Looks clean as hell
So what’s next?
Lift, wheels, etc!
Bro I want to ask you for something!! I want to buy JL but the adaptive cruise control in jeep Too expensive so can I buy a Wrangler without this system and then when I have money, can I buy this system and put it on my Wrangler ?! Please, I want to know, can I do this?
Hey, thanks for the message. I can look into it. Not sure if my jeep has cruise control or not LOL
Can you get those lighted switches in different colors such as green or blue? Thank You
Yah absolutely
Hello! Do you know where can I get some “decals” to identify what is this button for?
Great question! Let me know if you find any labels
Excellent video
Thanks 🙏🏼
What size did you end up using for the toggle switches?
Are the switches live all the time or only ignition on so you don't leave a light on and drain the battery.
You can have it either way. All you would need is to run a line to the fuse box and add it to the ignition fuse. 👌🏼
Nice job as always Bro. that JL is going to be bad A$$
Thanks!! 👌🏼👌🏼 more awesome stuff to come
Can you share where you got the amber switches from !!
Ordered them from lighthouse LEDs online 👍🏼
Once installed do you need to use the wiring provided with cube lights and light bars? Or can you just run a positive and negative wire to the MLC6?
Good morning, you should only need a positive and negative to the control module. Similar to the sPOD unit. So far, I am adding a Mopar four switch module. Other options include sPOD, Voswitch, and others.
Dex Loving Your vids as usual,but u didn't post where to get the orange switches.I ordered the mlc-6 already. My Jeep build is coming along great thanx to your videos. Keep up the good work. I want moreeee videos lol
Thanks! I appreciate your love! I got the switches from lighthouse LED, you can find them on google. I have a lot more awesome content to come!!
@@adventuredex yessssssss
@@adventuredex i just followed you on Facebook,anywhere else you on.
Instagram is the best place to find me
probably a dumb question, but will this work with a 21 JL? The amazon link says 18-20! also do you have a link for those badass switches?
Yes
Sorry Dex but I had to laugh when you said Rough County thought that system through. Yeah, they thought it through when they copied SPOD 😆. Either way nice install video brother.
Thanks Jimmy!!! 😃
LETS GOOOO
🤙🏼🤙🏼🤙🏼🤙🏼🤙🏼
That's where my lockers and mopar switches are. So no go for Rubis.
Unfortunately not! But they do make an upper dash version for the rubis
Anyone have a location to get the switches? I've seen some on Amazon just not sure if they are 12v switches or not.
I need to get this
hello im Justyn's brother i subbed btw
Thanks brother 🙌🏼
KC HiLiTES round pod light bar!
Definitely looking at KC 🙌🏼
Where did you get those switches?… I need red ones
Are you gonna lights for the jl
how has it and the new switches held up? switch source?
Still great!!
Winch!
💪🏼💪🏼
Where did you buy this at, which web site
Where can one find the orange switches?
Thanks
Ordered them from a place called lighthouse LEDs.
Hope that helps 👌🏼
Does this work with the gladiator
Yes!!
This content!
🔥🔥🔥🔥
they had 7 bolts for the cubby lol. out of everything lets make sure that cubby is really in there lol
Can you give me a link to the switches
Where do I Oder the costume switches from?
Where did you get the toggle switches
Add a 50inch RC light bar or a 30inch hood light bar
😎😎👌🏻👍🏻
🙌🏼🙌🏼🙌🏼🙌🏼🙌🏼
Light bar 42 inch or 40
Did what I did, buy some oem jeep led headlights and buy some rgb kits for them from oracle lights, the video they have sucks btw, I had to dremel to get the lens to come off but they look clean and I can change with my phone
Thanks for the idea! Very cool
Air compressor and power inverter
Thanks for the suggestion
im at around 7 minutes in.. and i gotta say.... hopefully the directions/plugs for that are backwards... cause i'm sorry but that is extremely stupid to have a water proof connection... on the INSIDE of the cab... where ya know, no water should ever be... and the non-water proof connection goes into the engine bay where there's a pretty high chance of it getting wet... specially for those who have a snorkel and shove their front ends under the water on occasion...
It’s too back to the future-ish for me! It really is useful but I just don’t like the look! Almost like a drag race car
my love is my life so much baby I’m not going to my house anymore I’m so sad 😭
These are cool. Like a race car. :). Love it. But way too much work to install them.
Hey
Coffee maker
🤣🤣🤣🤣
those switches don’t fit