Hello, i have problem too. My battery could hold for 2-3 hours, but i've removed it cuz i wanted to reset bios and after that i've notice that my laptops turns off after few minutes on battery. The battery was fully charged, but laptop turns off. Right now my laptop cannot turn on on battery at all. And when i've meassured my + pin there is no voltage at all. If i measure my batteries from both sides there is 12.5 voltage. My laptop is x541sc ... I've bough second-hand battery like mine, but it's the same. No voltage from + pin. Is my BMS locked cuz i've removed my battery from the laptop or something like that? How we fix this?
Hi Please help me I have a laptop battery model DELL J1KND 11.1V 48W I want to charge it without a laptop and with a 13-volt adapter, can I? How do I use its pins? What will the connections be like?
You should speak your thoughts along with video. Having video along with listening to what you are trying to convey will make your videos more imersive
I've tried this method, even the batteries were replaced with new ones. but still not working normally. Windows says there is charging but the position remains 0% and no power is saved at all. bios still responds to failure. If there is a link, please advise. thanks.
@@ManishPatel693 Hello, i have problem too. My battery could hold for 2-3 hours, but i've removed it cuz i wanted to reset bios and after that i've notice that my laptops turns off after few minutes on battery. The battery was fully charged, but laptop turns off. Right now my laptop cannot turn on on battery at all. And when i've meassured my + pin there is no voltage at all. If i measure my batteries from both sides there is 12.5 voltage. My laptop is x541sc ... I've bough second-hand battery like mine, but it's the same. No voltage from + pin. Is my BMS locked cuz i've removed my battery from the laptop or something like that? How we fix this?
In actuality you need specialised hardware (i.e. EV2300/EV2400) with software (Smart Battery Workshop or Battery EEPROM Works) to really reset a laptop battery. Specifically the BQXXXX IC that is located on the PCB board - to which the 3 pairs of 18650 cells are connected to. 😑😕😒 I have an assembled/saved playlist with videos on this topic on my channel.
@@davidbolha Even worse: you most likely need both, the software by Texas Instruments is free, but the 2300 or 2400 interface is expensive. Besides that, you will need the inexpensive BE2works dongle and (expensive!) softwarelicense for BE2works. Be2Works will crack the security keys and though you can reset the device fully by use of BE2works, it takes a lot of calculating with offsets and such. The EV2x00 and accompanying software make this sooo much easier. Unless you want to start doing this as a business or your batteries are very expensive (350-500+ Euro like mine) this is feasible, otherwise you'll be spending close to 500 euro or over for the software and both interfaces.
RAMI ALAQQAD well im looking too They freeze batteries ( i never try this), They do the short on the pcb but not sure what place vid is not clear, They also disconnect all power from pcb for min. 10 sec and this one i will try doday but not much hope..
Hello, i have problem too. My battery could hold for 2-3 hours, but i've removed it cuz i wanted to reset bios and after that i've notice that my laptops turns off after few minutes on battery. The battery was fully charged, but laptop turns off. Right now my laptop cannot turn on on battery at all. And when i've meassured my + pin there is no voltage at all. If i measure my batteries from both sides there is 12.5 voltage. My laptop is x541sc ... I've bough second-hand battery like mine, but it's the same. No voltage from + pin. Is my BMS locked cuz i've removed my battery from the laptop or something like that? How we fix this?
Sir mera laptop lenovo thinkpad ka hai uski battery change karni hai but mai bul gya kaise lage gi postive or negative kaise lagegi
Hi
Please help me
I have a laptop battery model
DELL J1KND 11.1V 48W
I want to charge it without a laptop and with a 13-volt adapter,
can I?
How do I use its pins?
What will the connections be like?
THANK YOU HAVE YOU SCHEMATIC OF THIS PLZ,,,,,,?????????
You should speak your thoughts along with video. Having video along with listening to what you are trying to convey will make your videos more imersive
What does LP1,LP2,LP3,LP4 & LP5 means on battery circuit ?
Lithium polymer 1 ,2 baterry numbering
I've tried this method, even the batteries were replaced with new ones. but still not working normally. Windows says there is charging but the position remains 0% and no power is saved at all. bios still responds to failure. If there is a link, please advise. thanks.
Your bms is locked bcz you disconnect battery. Bms need continuous suppy when break bms locked.
@@ManishPatel693 Hello, i have problem too. My battery could hold for 2-3 hours, but i've removed it cuz i wanted to reset bios and after that i've notice that my laptops turns off after few minutes on battery. The battery was fully charged, but laptop turns off. Right now my laptop cannot turn on on battery at all. And when i've meassured my + pin there is no voltage at all. If i measure my batteries from both sides there is 12.5 voltage. My laptop is x541sc ... I've bough second-hand battery like mine, but it's the same. No voltage from + pin. Is my BMS locked cuz i've removed my battery from the laptop or something like that? How we fix this?
Don't mind the birds but the music is horrible. Thumbs up from me though. Well done!
Please help me
I have same laptop and same battery need scheme of battery because i forgot to write before assembly
Thanks
How to reset BMS circuit?
In actuality you need specialised hardware (i.e. EV2300/EV2400) with software (Smart Battery Workshop or Battery EEPROM Works) to really reset a laptop battery. Specifically the BQXXXX IC that is located on the PCB board - to which the 3 pairs of 18650 cells are connected to. 😑😕😒
I have an assembled/saved playlist with videos on this topic on my channel.
@@davidbolha please send link here friend???
@@B.E.H. I can't post external links on YT anymore. Plus you have all the info in my comment above. 😏
ruclips.net/p/PLEE8C_lsvw26KyBNYBcG4X8SxOoKIPb9n
@@davidbolha Even worse: you most likely need both, the software by Texas Instruments is free, but the 2300 or 2400 interface is expensive. Besides that, you will need the inexpensive BE2works dongle and (expensive!) softwarelicense for BE2works. Be2Works will crack the security keys and though you can reset the device fully by use of BE2works, it takes a lot of calculating with offsets and such. The EV2x00 and accompanying software make this sooo much easier.
Unless you want to start doing this as a business or your batteries are very expensive (350-500+ Euro like mine) this is feasible, otherwise you'll be spending close to 500 euro or over for the software and both interfaces.
Try to change the charger
the same problem happened to me
Same to me😭
dump methods not right>
you need to reset bms circuit
How to do it?
You got any link?
@@daggy7893 No I dont have any idea >>>if you have any idea tell me plz>
RAMI ALAQQAD well im looking too
They freeze batteries ( i never try this),
They do the short on the pcb but not sure what place vid is not clear,
They also disconnect all power from pcb for min. 10 sec and this one i will try doday but not much hope..
my programmable board battery is broken can i buy this board
Bro can v by the board
@@josephg161 no
Can you repair a battery my laptop
simply dont buy from lenovo , its once and forever
How voltage apply manual charging
Max 4.2v
4.2v /cell
Lol didn't even need this the same thing happen to me I just waited while its charging and its fix
Peririang eku laptop
100% working
The background noise is distracting. 😑
You have to charge it with charger first