That bandwidth setting is only for the ethernet only and not the Wi-Fi. So unless you're using ethernet instead of Wi-Fi, you're not going to see a difference in bandwidth consumption over Wi-Fi.
This does not work on newer TCL TVs. The menu is there but the bit rate selected will not stay. It will revert back to Auto after pressing Home button.
It's not just the newer TV... This procedure no longer works well, it's part of the v9.4 OS/firmware. I think it does work but when you re-enter this menu, it's reset to "auto"... However, once you set the lower rate, it does appear to stick until you restart Roku or reenter this menu. Roku is just silly not to expose this on the normal menu, so people can chose to manage their bandwidth usage better at their own choice. A smooth streaming show at lower rate is much better than a constant buffering show, or one the chews through your ISP monthly allowances.
My Ruko model 3930RW doesn't matter what manual selection you make it goes right back to Automatic. I tried hitting the home button for streaming and could tell the picture was perfect even on the lowest setting so that doesn't work with the ruko I picked up last week. My budget doesn't allow me to have unlimited amounts of data, I wanted to lower it. I guess I'll take it back and go with a different streaming device.
My Roku stick bandwidth keeps spiking to over 200mbps bandwidth. I have no idea how to stop it, or why it's even using that much bandwidth in the first place. It's absolutely insane.
It's not working on my Roku 3. I've tried several times. I noticed your screen says you are not connected to WiFi, so I even disconnected the WiFi and tried again several more times. I have an LG TV with a Roku 3 box. Any suggestions?
MY GOD! THANK YOU! I run a trailer park wifi and Every single crying person has a Roku. Everyone else is fine. This should give me a solution. Thank you so much!
I learned this trick years ago and it worked for a long time but now if you change the setting to the lowest and then go back in to check it, it has automatically changed back to the highest setting. Do you know why it is doing that and how to get it to stay on the lowest setting? I'm not sure why this worked for years for me but doesn't now.
We have found that issue as well. If you set it and go back to the home screen but for some reason if you go back to the settings it auto checks the max again. Hopefully this is glitch Roku can fix.
Does this work on the new Roku sticks? I tried it and no matter how fast I entered the buttons on the remote I could not get to the screen to change to the menu letting me change the data rate. I was visiting a friend in another State who would get disconnected from his wifi and thought it would be worth seeing if this would help. He has a strong WiFi signal so that's not the problem.
@@amdigitaltech this feature worked a week ago i think the roku updated and now the feature is blocked entirely on my 4k roku and it eats all 40mbs i have of bandwidth
@@amdigitaltech according to the roku forums the feature has been removed due to the fact that roku says it was meant for “internal testing and doesn’t not actually do anything”
If you set a bandwidth limit and if you go out and then go back to the bandwidth saver for some reason it sets back to automatic. Roku released an update a while back that introduced this bug and they have not fixed it.
Try rebooting the roku as well as your internet equipment. If that doesn't work try deleting the network information from your roku and inputting it in again.
My internet went off last night and I called the cable company at 1:00 in the morning because my recovery mode purple screen won't go off the Roku TV and I did everything restarted it unplugged it I don't know what else to do I' called TCL and Roku and ain't nothing they can do and cable company nothing I can do so I just don't know what to do do you? My TV was fine until the internet didn't work.
One other thing you can try is to perform a factory reset. Depending on your model of TV you may have a reset button on the back of the TV that will reset it to factory settings when you took it out of the box.
Came to try this because certain apps crash after about 3 minutes of playing. Only Netflix will play past that and I’m at my wits end. I feel that I have tried everything (factory reset, manually reset, uninstalled and installed apps...)Have you seen this before?
Hello. I am tech stupid. My question is, how can I boost my ROKU from my house out to my shop, about 80 feet away. I have two ROKUs in my house. Thank you for your time.
Someone correct me if I'm wrong, but roku is not like wifi. It works on the roku TV or if using a stick, whatever TV the roku is plugged into. It doesn't connect wirelessly to other devices.
I'm pretty fed up with my Roku TV right now. Every time Roku downloads the newest version of Roku software to my Magnavox/Roku TV, I have to register all my streaming apps all over again !! This has happened to me 2 times in less than 2 weeks. Version 10.5.0 build 4181-65 is the most recent problem. It's time consuming and a tedious problem to have to keep fixing. Is anyone else having this problem ??? WRZ 2021-10-19 Delaware County, PA
@@amdigitaltech I hate that the Chinese can purchase the marketing rights of historic brand names like Magnavox for the sole purpose of tricking old people like me into thinking I am buying an historic high quality brand, that in reality no longer exists.
Yes, if you go back and double check the setting it resets to 12 for some reason. Just set it and hit the home button to begin streaming and you should be all set. That reset glitch has been there for a while.
@@TheRedgog22 that's strange. Makes you wonder if Philips did some kind of modification of the firmware to disable this feature. I wouldn't think they would but stranger things have happened. I just updated to os 10 on our TCL and it's still available.
Many Rural areas do not have providers and you have to go with Hughes net satellite which charges you dearly for the data you use. So rather than using a months data in 2 or 3 days, we are willing to stuffer some on quality to afford having a provider. You sound like someone with unlimited data, so why are you even watching or commenting on problems you can not possibly have?
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
That bandwidth setting is only for the ethernet only and not the Wi-Fi. So unless you're using ethernet instead of Wi-Fi, you're not going to see a difference in bandwidth consumption over Wi-Fi.
Thank you!
Home button 5 times, Rewind button 3 times and fast forward twice
Does not work on 4K+ stick. 2024-05-01
This does not work on newer TCL TVs. The menu is there but the bit rate selected will not stay. It will revert back to Auto after pressing Home button.
i noticed that as well
It's not just the newer TV... This procedure no longer works well, it's part of the v9.4 OS/firmware. I think it does work but when you re-enter this menu, it's reset to "auto"... However, once you set the lower rate, it does appear to stick until you restart Roku or reenter this menu. Roku is just silly not to expose this on the normal menu, so people can chose to manage their bandwidth usage better at their own choice. A smooth streaming show at lower rate is much better than a constant buffering show, or one the chews through your ISP monthly allowances.
so none of that did anything. i did your button pushes and all they did was ended on one of the base options and did not go to a bit stream page.
Dang, its not working on our campers rokus. Is there a new button set to make this work?
My Ruko model 3930RW doesn't matter what manual selection you make it goes right back to Automatic. I tried hitting the home button for streaming and could tell the picture was perfect even on the lowest setting so that doesn't work with the ruko I picked up last week. My budget doesn't allow me to have unlimited amounts of data, I wanted to lower it. I guess I'll take it back and go with a different streaming device.
My Roku stick bandwidth keeps spiking to over 200mbps bandwidth. I have no idea how to stop it, or why it's even using that much bandwidth in the first place. It's absolutely insane.
It's not working on my Roku 3. I've tried several times. I noticed your screen says you are not connected to WiFi, so I even disconnected the WiFi and tried again several more times. I have an LG TV with a Roku 3 box. Any suggestions?
Me too!!! So frustrating I bought a fire stick
MY GOD! THANK YOU! I run a trailer park wifi and Every single crying person has a Roku. Everyone else is fine. This should give me a solution. Thank you so much!
I learned this trick years ago and it worked for a long time but now if you change the setting to the lowest and then go back in to check it, it has automatically changed back to the highest setting. Do you know why it is doing that and how to get it to stay on the lowest setting? I'm not sure why this worked for years for me but doesn't now.
We have found that issue as well. If you set it and go back to the home screen but for some reason if you go back to the settings it auto checks the max again. Hopefully this is glitch Roku can fix.
Does this work on the new Roku sticks? I tried it and no matter how fast I entered the buttons on the remote I could not get to the screen to change to the menu letting me change the data rate.
I was visiting a friend in another State who would get disconnected from his wifi and thought it would be worth seeing if this would help. He has a strong WiFi signal so that's not the problem.
Unfortunately Roku has since disabled this feature.
Do you have any tips for roku audio dely while using bluetooth headphones
Can you do a factory reset and get into this menu ? This doesn't work on 32 and 40 TCL TVs.
Unfortunately Roku has removed this feature.
Hi! I tried this trick and nothing happens... I have a roku stick 3800X ver 10.5.0. You know another metod?
I just checked two different Roku devices and it appears that Roku has either disabled or changed ways to access this feature in 10.5
@@amdigitaltech this feature worked a week ago i think the roku updated and now the feature is blocked entirely on my 4k roku and it eats all 40mbs i have of bandwidth
@@fortnitemaster2648 yes, it appears that Roku has either moved or removed this setting. Still searching for a fix.
@@amdigitaltech according to the roku forums the feature has been removed due to the fact that roku says it was meant for “internal testing and doesn’t not actually do anything”
What happens when it does not want to grab the lowest bandwidt and it stays on automatic?
If you set a bandwidth limit and if you go out and then go back to the bandwidth saver for some reason it sets back to automatic. Roku released an update a while back that introduced this bug and they have not fixed it.
Doesn't do anything in my Roku 3 when I push thebuttons
Your screen says not connected a d so does mine. Can't seem to make it connect. Can you help me? TYIA
Try rebooting the roku as well as your internet equipment. If that doesn't work try deleting the network information from your roku and inputting it in again.
Thanks it worked on my roku box in 2021
Did it make your internet faster
@@345trev It did at first but now My HDMI is messed up even tho I got new cord
I had an issue with my roku because there was a problem with my connection
My internet went off last night and I called the cable company at 1:00 in the morning because my recovery mode purple screen won't go off the Roku TV and I did everything restarted it unplugged it I don't know what else to do I' called TCL and Roku and ain't nothing they can do and cable company nothing I can do so I just don't know what to do do you? My TV was fine until the internet didn't work.
One other thing you can try is to perform a factory reset. Depending on your model of TV you may have a reset button on the back of the TV that will reset it to factory settings when you took it out of the box.
My Netflix takes forever to load. At the end it says no Internet connection though I have a string wireless connection. What are my options?
Try rebooting all of your internet equipment, then reboot your Roku device and see if that brings it back online
Thx but already got it fixed.
wtf are you talking about? little button trick doesn’t work..? how do you get to the bit over ride screen?
Came to try this because certain apps crash after about 3 minutes of playing. Only Netflix will play past that and I’m at my wits end. I feel that I have tried everything (factory reset, manually reset, uninstalled and installed apps...)Have you seen this before?
How about going to Netflix on the internet. And fixing it for all profiles, .3 for the lowest setting. Not sure if it will help.
Excellent thank you
Running way smoother and picture quality changed significantly
I’m doing the home back reverse and it’s not doing annything
Unfortunately with the latest update Roku has disabled this feature.
As soon as I hit the home button once it takes me right to the apps
Unfortunately Roku has disabled this feature
Hello. I am tech stupid. My question is, how can I boost my ROKU from my house out to my shop, about 80 feet away. I have two ROKUs in my house. Thank you for your time.
Someone correct me if I'm wrong, but roku is not like wifi. It works on the roku TV or if using a stick, whatever TV the roku is plugged into. It doesn't connect wirelessly to other devices.
You will need to boost your wifi signal out to your garage to receive better Roku performance.
My nitrate seem to go back to automatic and 12 MPs why..?
That's a bug in the Roku software. For some reason when you go back into the settings it resets itself when you go back to check.
It's not working I can't get to tht bandwidth
Good looking out imma try it
That doesn't work on my roku 2019 at all. I don't find that on any of the settings menus either.
SAme
Dont have "my feed"
It dosen't work
It didn't work for me.Please help
Unfortunately Roku has disabled this feature
Resetting roku pin forgot
Did not work on my TCL tv
It’s better than buying a Firestick
I'm pretty fed up with my Roku TV right now.
Every time Roku downloads the newest version of
Roku software to my Magnavox/Roku TV,
I have to register all my streaming apps all over again !!
This has happened to me 2 times in less than 2 weeks.
Version 10.5.0 build 4181-65 is the most recent problem.
It's time consuming and a tedious problem to have to keep fixing.
Is anyone else having this problem ???
WRZ 2021-10-19
Delaware County, PA
That's the first we've heard of this issue.
@@amdigitaltech
I hate that the Chinese can purchase the marketing rights
of historic brand names like Magnavox for the sole purpose
of tricking old people like me into thinking I am buying
an historic high quality brand, that in reality no longer exists.
Roku Ultra LT this did not work.
Unfortunately Roku has disabled this feature
It's not saving my settings, it keep going back to automatic at 12? Please help
Yes, if you go back and double check the setting it resets to 12 for some reason. Just set it and hit the home button to begin streaming and you should be all set. That reset glitch has been there for a while.
Its not working I now have celery sticking out of my butt
I don't know where you got that stupid thing from but it didn't work that wasn't really a tech tip it might have worked on yours but not mine
What model of Roku device do you have? I have a couple of different models of the express and a TCL Roku tv and this works on all of them.
@@amdigitaltech I have a Philips Roku TV
@@TheRedgog22 that's strange. Makes you wonder if Philips did some kind of modification of the firmware to disable this feature. I wouldn't think they would but stranger things have happened. I just updated to os 10 on our TCL and it's still available.
Will all's I know is it didn't work on my Philips TV and it didn't work on my Roku premiere so who knows
Estoy arepentiodo de comprar la aplicación a 10 metros no agara la senal de internet....una mierda roku
Maybe you should get your iPhone and download people firefighters
Thank You!
Thanks man !!
They removed this and now I want my money back for my useless roku I'm only going to he able to watch one movie a month noe
ty :D
Leave it at Auto, get a better provider.
Many Rural areas do not have providers and you have to go with Hughes net satellite which charges you dearly for the data you use. So rather than using a months data in 2 or 3 days, we are willing to stuffer some on quality to afford having a provider. You sound like someone with unlimited data, so why are you even watching or commenting on problems you can not possibly have?
@@Ka3Ty Try Starlink when it becomes available in your area. HighesNet has always been a joke and hopefully that joke will soon end.
super
Thank you!