Boss GT-1│Multi Effects Processor│Tutorial - Set-up Basics.
HTML-код
- Опубликовано: 8 сен 2024
- 🎸🔊 Boss GT-1 Basic Setup Examples for usage 🎸🔊
In this video about the Boss GT-1 Multi Effects Processor from @BOSSinfoglobal, I'll explain and show some of the basic setups for usage, and for ensuring the optimal performance of the Boss GT-1.
First step will be the Output Select, and choosing a setting that matches the equipment you're connected to.
Then figuring out whether you need to use the Boss GT-1's onboard preamp and speaker models. If you're not, then turn it OFF, and let your external amplifier do its intended work.
Pay close attention to the effects you choose to use, and especially their individual volume and level parameters.
Make sure to 👍 SUBSCRIBE 👍 to my Channel, and hit the 🔔 bell 🔔, to keep up to date with my newest uploads.
Requests on specific Boss GT-1, and Boss GT-100, tutorials are very welcome - just leave a comment down below.
DON'T MISS THESE other Boss GT-1 videos:
Boss GT-1 Direct USB Recording Tutorial in Cubase
⭐ • Boss GT-1 Direct USB R... ⭐
Boss GT-1 Write Menu Details and Explanation Tutorial + Patch Display Trick.
1️⃣ • Boss GT-1 Write Menu D...
Boss GT-1 Signal Chain and Order of Effects Blocks
2️⃣ - • Boss GT-1 Signal Chain...
Boss GT-1 Signal Chain and Assigns + Footswitches Tutorial
3️⃣ - • Boss GT-1 Signal Chain...
How To Go From Clean To Distortion.
4️⃣ - • Boss GT-1 - How To Go ...
Creating A Patch From Scratch.
5️⃣ - • Boss GT-1 Tutorial - C...
Boss Tone Studio Tutorial.
6️⃣ - • Boss GT-1 Tone Studio ...
DON'T MISS OUT on these Guitar Repair and Tech videos:
Crimson Guitars Luthier Tools Unboxing.
1️⃣ - • Crimson Guitars Luthie...
Guitar Pedalboard Build & Setup.
2️⃣ - • Guitar Pedalboard Setu...
Sterling by Music Man│S.U.B. Series Ray4 Bass Setup│Part 1 - Truss Rod Adjustment.
3️⃣ - • Sterling by Music Man│...
DON'T MISS OUT on these playlists:
Boss GT-1 Tutorials.
1️⃣ - • Boss GT-1 Tutorial Videos
Boss GT-100 Tutorials.
2️⃣ - • Boss GT-100 Tutorial V...
🎸 1974 Greco Les Paul Custom EG-480 | Made in Japan | Refret | Part 1️⃣ 🎸
3️⃣ - • 1974 Greco Les Paul Cu...
🎸 1970s Greco Les Paul Professional PE-520 / PE-600 Restoration 🎸
4️⃣ - • 1970s Greco Les Paul P...
🔨 Guitar Fret Work 🔨
5️⃣ - • Guitar Fret Work
🔧 Epiphone SG G-400 Guitar Setup 🔧
6️⃣ - • Epiphone SG G-400 Guit...
Thanks for watching and for the great support, it's truly valuable to me!
Comments/questions are very welcome, so make sure to leave one in the section below.
See you in the next one 📹📸
#BossGT1 #BossGT1Tutorial #GuitarNTabs
This is an awesome video. In this era of RUclips, so many people (many commenters) are in such a rush!!! As I sit here with my GT-1 and follow his words of wisdom, it's a masterclass in how to set it up. Everyone be quiet, patient and let the teacher teach! It's 42 minutes of your life that will save you hours in the future...
Adam, thank you, very much! You're right on point; many new users are in such a rush, and won't take the time to actually learn what it's all about... The purpose of this video is to educate, and save users a lot of time, in the long run, if they're willing to allow for it.
Your kind words are truly very much appreciated, big thanks!
I've pinned your post, because it's something everyone should read, so I hope your cool with that.
By the way, what an excellent RUclips Channel you have, I subbed, and I will surely follow along!
Again, thank you, for taking the time to watch and comment!
Please let me know if you should ever need anything, I'd be happy to assist.
Cheers & have an excellent weekend! 😊
@@GuitarNTabs Oh man, wonderful to make contact with you. Please contact me privately - I tour a lot in Germany - it may be nice to meet up in person!
@@adamrafferty - Hey again, Adam! 😊
Indeed, thanks for making contact - much appreciated!
Sure, that would be nice, maybe that could be possible at some point!
Cheers, man!
I agree 100% with Adam Rafferty, this is a fantastic video that goes past the superficial and actually teaches you how to use the BossGT1. Well done mate👍
@@michaelholmes9874 - Thank you, Michael! I really appreciate it!
Have an excellent day, and please let me know if you need anything!
Best regards.
I can’t believe the dislikes, so informative, thank you.
Hi Frank,
Thanks for your comment and for the kind words - they are greatly appreciated.
Well, I guess that's part of the game... Even though sometimes I don't get it either...
Thank you for enjoying this, and for finding it informative and useful - that's the approach I was aiming for.
Please let me know if you need anything, I'd be happy to assist.
Have an excellent day.
This is the kind of presentation I like. Great job at bringing us something useful that you actually own and use to the point of developing a significant expertise that you are able to effectively share with us. This is what we need.
Hi!
Thank you, I greatly appreciate your kind words.
Please do let me know if you need anything else.
Best regards.
@@GuitarNTabs I presently have my gt1 connected to my yam 12 channel mixer with an active di box an a single trs guitar cable (2 black rings on the shaft). This is the gt1 mono output 1/4". But this output is summed mono according to the documentation. Well, being 'mono' defeats the purpose of my high quality stereo jbl pa system (studio monitors and sub, 2.1).
The problem is:
The current hook up does not provide stereo sound to my sound system.
This factor is limiting and eliminates any stereo sounds from patches that use stereo imaging.
Guessed solution:
I'm going to run 2 trs cables to a 2 channel di box. And xlr cables from the di to mixer.
Note: Present situation is summed mono trs cable into a 1 channel active di box. This sounds great and silent. Very excellent. But it can't be reproducing the sound close to the potential quality.
Solution:
I am going to hook the gt1 outputs up with 2 trs cables to a two channel di box. Xlr from the di box to the mixer and powered nearfield speakers and subwoofer.
There is no way to guess if I will notice a difference in the sound of the system and effects. It might be a subtle but imperceptible difference.
In this regard my present summed mono system sounds very good to my ears using acoustic guitar, electric guitar, baritone guitars, and bass guitars.
I need to try the proposed alternative but probably better connection method.
I just got one of these real cheap and plan on using it with my Quilter. This video actually prevented me from returning it as at first I couldn't get a decent tone out of it. Thanks!
Excellent, I'm very pleased to hear that!
Enjoy your GT-1 and rock on!
All the best.
i bought one as a backup. for the money has some good sounds. took a while to learn to set it up, but after that was very easy!
Hi Scott!
Thanks for posting.
Indeed, it's a great piece of gear - I'm really happy with mine!
Once you get the hang of it, it's all down hill 🎸🎼
Have an excellent day.
Greetings! This video was fantastic. I just got a GT-1 and tonight is the first time I've messed with it. I read the manual, of course, but your video really helped me understand how it works, and what it is capable of. I have not a multi effects unit for a while. I used a Digitech gnx3000 at one time and almost bought another one. But I decided on something more "modern," and the GT-1 was in my budget as brand new. Anyway, so far I'm very pleased, and your video has way more information than the manual. Many thanks!!!
Hey there, Matthew :-)
Thanks for your comment, and for subscribing, I truly appreciate it!
Thank you for the kind words, I'm very pleased that you've found my videos helpful - that's what it's all about!
Reading the manual is a good place to start, and it will provide some knowledge, but it's lacking on many points, sadly..
I'm glad you could find the rest of the information here, on RUclips, through my channel :-)
Great choice of going with the GT-1 - I'm still really happy with mine, and use it for all sorts of things.
Matthew, let me know if you have any questions along the way - I'd be more than happy to help out.
Just fire away.
I'd also be more than happy to take requests on future videos - so just let me know.
Thanks again
Have a great day
Cheers.
Fantastic tutorial! Would love to see another one geared toward using an amp (my interest is in small amp setting). Additionally, a session regarding working with the Looper. What you say is true. This is a fantastic piece of gear, but if you’re not willing to study HOW to use it, you miss so much of what it can do. Thank you so much for this help!
Thanks, GByePorkPieHat. I appreciate it!
Yes, it's fundamental that you study and get your hands dirty, in order to get the most out of such unit :-)
Thanks for your kind words, I truly appreciate it.
I'll see what I can do :-)
Have a good one & cheers!
I just bought a used one off of eBay. Got it pretty cheap. I am getting together an all battery powered system, amp/pa, vocal hamonizer, and now this multi-effects pedal for playing in parks and other places with no power. All I have left to find is a looper that has storage, or a battery to run my only plug into wall looper I already have. Got a lot of original backing songs I wrote that I got saved on the card that goes into my looper, so I’m hoping I can figure out a way to power that for the all battery setup! Great informative video, helped me make the choice of buying. Thank you!
Hi there, HumbleHeartMinistry.
Thanks for your comment and for watching.
Sweet, that sounds like a great set-up and a nice way to get around, when playing outside.
Thank you, I'm very pleased to hear that - the GT-1 is an excellent unit!
Let me know if you need anything else.
All the best.
Thanks for the time and effort you put into this video, I have bought one of these and am a complete beginner with effects and this was very helpful, will look at your other videos on this unit as well 👍
Hi,
Thank you very much for watching my video, I greatly appreciate it.
I'm happy you found it helpful, and I'm hoping you'll find my other videos just as good.
It can be overwhelming at first, but you'll get there, trust me.
If you need anything, please do let me know, I'd be happy to assist.
Have a great day.
Cheers.
Thanks for taking the time to make this video. I am a beginner/intermediate player who sold his amp recently because I moved into a unit in a big city with paper thin walls. I received the GT-1 for Christmas so I could play at home and the set-up part of the video was great ... and the second half scared me to death with all the tweaks you can make! Do players spend that much time just on setting up, where is the time for practice :-)
Cheers, Majinnhec 😊
You're very welcome - I'm pleased to hear that you found the video helpful.
The GT-1 is great, and it offers a lot of different effects as well as preamp and cabinet options.
The main goal, before diving in, is to get it set-up properly - otherwise it will have an impact on the overall quality of the patches and effects, etc.
Well, all the tweaks should, at some point atleast, make things easier for you, when being on stage, for example.
With those extra tweaks, etc. you'll be able to gain much more control over the unit, and let it do whatever you need it to, hehe.
Let me know if you need anything else.
Best regards & Happy New Year.
Cheers.
I thought I was subbed. I am now. I bought mine because of your and a few others videos. This takes patience. Thank you. A few of my latest videos are using this machine. I love it! I've not been playing long but I am learning fast.
Hi Robert 😊
Thanks for your comment, and for the sub, I appreciate it!
That's excellent - I'm pleased to hear that! Great choice.
You're right, it takes patience, but it will be well worth it, trust me.
Let me know if you need anything, I'd be happy to assist.
Cool, I'll check it out!
Best regards & cheers.
I almost threw this thing at the wall, to be honest, and found your videos to be its savior. I read the manual but it was dog crap and was frustrating to me because it was like 4 pages and explained nothing. Now that I have watched everything and this tutorial you are awesome!!! Thank you again
Hi there, Brian.
Thanks for your comment and kind words, they are greatly appreciated!
I'm so glad to hear that you found my videos helpful, and it all worked out, with the GT-1
Trust me, the GT-1 is an excellent piece of gear, and you'll be able to get some superb and crisp tones from it!
I've had mine since it came out, and I still use it!
I agree with you, Boss should have paid more attention to the Owner's Manual, because it's not that good, sadly...
Please let me know if you need anything, I'd be happy to assist.
Best regards.
@@GuitarNTabs I appreciate it my friend and if I run into anything I will reach out. You are very comprehensive and I appreciate it!
@@brianbarnett100 - That's great, you're more than welcome to!
I try to do my best, show-casing these great Boss units, so I'm glad you got something out of it.
Have a great day!
Moving from the GT100 To the GT1 was great. I do miss having 4 settings to choose from but the portability and the battery power capabilities really makeup for the loss of the pedals. I'll be adding a control pedal to expand it + a MIDI controller to my RC500.
All battery powered and expansion for looping with my t5z
Hello Rafael,
Thanks for your comment, I appreciate it.
I hear you, but I really enjoy the GT-1 as well, and it's been perfect for the smaller stages and just for the portability!
The sounds are excellent and I've been so happy with it, and still is.
By control pedal I assume you're talking about an extra footswitch to control Assigns, etc.?
If so, I would highly recommend the Boss FS-7, it's as compact as the GT-1 and superb!
Let me know if you need anything else, I'd be happy to assist.
All the best.
@@GuitarNTabs would you be able to setup the fs-6 (or even fs-7) to be setup as a traditional two stomp looper. - rec/play on left and stop/clear on right. So the ctrl 1 on the gt1 is used as stock?
I’d like the versatility to add that similar to how the gt100 has the two looper stomp pedals on the top.
Also would there be a more portable control foot switch similar to the fs-6? As the fs-7 is setup top and bottom vs left and right
@@rafaelunplugged - Sadly the Looper, and its functions, can't be assigned to the external CTLs... It can only be operated as it comes default from the factory...
Hmm, there might be, a more portable footswitch, but I haven't really looked... I love the FS-7, and its compact form, so that's plenty good for me.
I hope this helps.
Let me know if you need anything else.
All the best.
@@GuitarNTabs I think it’s possible with midi switch controller.
I figured out (and test this if you like) - that with mic output on A and guitar output on B - when you play it live no loop or during loop recording the volume is higher. You’ll hear the volume decrease once you close a loop
But if outputs are both a&b volumes will be the same. You can balance it by decreasing loop volume though. But that is such a strange thing to me that the levels aren’t the same.
really impressed by how much info this video is stating. It is much like a clinic .
flat response monitors, time based effects in the fx loop, right on
Thanks, I appreciate it.
I’m watching this again, now that I’m more familiar with the unit. It’s going well.
What I’ve been doing is just adjusting the level from the play screen once I have my patches ready to go. I have about one through 10, just using one or two preamps.
So just by ear, I’ve had to adjust the levels on the play screen for smooth transitions in volume between different songs with different patches.
I didn’t notice any change in tone, so I was careful with that. And I did go in and fine tune each tone individually, mostly really decreasing the bass to cut through a mix or for live. And decreasing some of the gainer that was just getting in the way. Not as good as a db meter, but how does that sound to you? My process! 👍🏻🎸🇺🇸
Thank you!
Hello,
It all sounds like a good process! Just always make sure to even out any inconsistencies with the deducated effect's level parameter, and keep the Patch Level as a "last resort" option.
All the best.
Thanks for this mate great tutorial. If Boss isn't paying you for this, well, they fu**ing should! it's one of the best promotional videos I've seen for their products =)
Hi there, Tiago!
Thanks for watching, and thank you for your nice comment and words!
I'm still dreaming.. I would love to work with Boss, that's for sure.. I hope, one day, they will see this..
Please let me know if I can assist in any way.
Have an excellent weekend.
Thanks for a great review, I have a Roland Blues Stage 60 which doesn’t have effects return so I have to run straight into the amp.
I only need an extra overdrive option with modulation as the only effect the Stage 60 has is reverb.
I tried to find info on using or not using the preamp on the GT1 but most reviews did not dive deep enough, and although the sound I was getting on the small amp and combo amp setting was ok I always thought the demo videos seemed to sound better so I stopped using the GT1 and ran a Dap 1 pedal instead which is a good pedal, but limited.
So thanks again for a clear concise explanation, I will be trying my GT1 at rehearsal today for sure.
Thanks and greetings from New Zealand.
Mike.
Greetings, Mike.
I'm very sorry for my late reply... I've been behind on answering comments...
With an amp like the Blues Cube, where there's no AUX or Effects Loop, it's probably a good idea to only use the GT-1 for its effects, and let the Blues Cube do the amp stuff.
The sound and tone from the many review videos are mostly made with the GT-1 running into a mixer, PC or recording device, where the GT-1's preamp models are used, and that's why... Some use it with an amp too, but for the most part it's straight into a recording device.
I'd give the GT-1 a go, direct into the mixer, etc. That's what I do, and I absolutely love it!
Again, I'm sorry for the late reply.
I hope this helps.
Best regards from Denmark.
Just got this for Christmas, thanks so much for the tutorial!
Greetings & Merry Christmas 🎁🎄
That's excellent - what a great gift!
Please let me know if you have any questions or issues - I'd be happy to assist.
It's really important to get the GT-1 set-up properly, before you start playing.
Best regards & wishes.
@@GuitarNTabs just one thing. Where can you find a USB 2.0?
@@protostargaming3972 - A USB 2.0 cable??
@@GuitarNTabs To connect it to a computer. I want to download patches off of online and I think you need a USB 2.0 to connect it. I ordered one off of Amazon though, so I'm all set. Another thing though, is what kind of amp I have. I have a Fender 65r and I didn't know what kind of amp that was on the pedal.
@@protostargaming3972 - Hey again & Happy New Year!
Sorry for the late reply.. I've been behind with the comments...
Okay, good to know, then you're all set! Just connect it to your computer.
Well, how do you want to use the GT-1? For its effects only, along with your Fender 65r amp? Or do you want to use the GT-1 for both its effects and onboard preamps/cabinets? You have to figure that you first, because those options are two completely different setups.
Let me know, and I'll help you through.
Best regards.
I love my GT1. Your tutorials are great, especially since I lost my manual and needed a refresher.
Thank you, Monte! That's very kind of you!
I'm glad you found them useful!
I guess I'll have to make an updated version, soon!
Let me know if you need anything.
Cheers.
@@GuitarNTabs Thanks! I hadn't used it for a few months and had forgotten a few things. I think I'm good now but I've watched a few more of your videos.
@@MonteD1 - That's great to hear!
Enjoy it, and please do let me know if you need anything else.
Cheers.
To save a lot of time and pushing buttons,hook it up to your computer and life is a lot easier.
It is a great pedal. Had mine for months and never had the time to really set up up.
Definitely using the computer USB and away you go.
But do still watch this for some great hints if you’re not familiar with what all the effects do and so forth.
Cheers! Indeed, using Tone Studio is great, and often quicker. I guess it depends on what you're used to.
Have an excellent day, and stay safe!
i use mine with the pre amp clean fender twin into a drri amp and it sounds soooo good with comp, slapback, and a little bit of overdrive. i use the same settings but with the tweed bassman and vox pre amps into the same amp and it is very very good. i use this to gig with but i play classic country and old rock. like ur tutorials, learned a lot from them, im just an old knob turner but this gt1 is great!
Hey there, Scott :-)
Thanks for your comment - that's really nice to know!
The GT-1 is indeed great, and the effects and preamps are superb!
I use the Clean Twin preamp as well, and if I add the T-Scream overdrive + some delay, then I'm right where I need to be! :-)
I play in a Partyband, so I have to cover a lot of ground, and the GT-1 is excellent for that type of set-up!
I'm glad that you found my videos and tutorials helpful!
You're always welcome to let me know if you need anything!
Keep turning those knobs, and rock out, Scott :-)
Cheers, mate!
Regards.
This unit shines when you use OD drives+Natural clean amp, and not the dirty channels of the other cab sims. Regarding Input calibration, one can simply keep the amp gain/volume level slightly above the bypass sound, for me i keep it gain 60, vol 70
Hi there!
Sorry for the late reply.
Thanks for your comment, I greatly appreciate it.
I agree, the Natural Clean amp is great, especially when paired with the OD/DS section.
I have several patches using that configuration.
However, I really like the Match Drive preamp model as well - it's really great.
When you say the "bypassed sound" are you then referring to the bypass mode of the Tuner, or??
Thinking about it, I believe only the preamp's level parameter should be adjusted, in regards to the "Input Calibration", because the gain will only make it "grittier", then volume parameter will adjust the overall volume of the preamp.
Let me know, it's a great topic, especially for a unit that doesn't have a dedicated way of setting the Input Calibration.
Cheers.
@@GuitarNTabs Hello! By bypassed i meant no effects/amps and master patch level only at 100 (50%) which i believe will be similar to "tuner" sound level (i have not checked yet). I am in agreement with you that gain wil only make the signal "dirtier" and will denifitely clip if recording via interface. I actually am planning to Upgrade to the Line 6 POD GO and hence selling my Zoom G3N but keeping my GT-1. In India (where i live) the Pod Go is ridicoulusly priced around 600USD. Oh yes i am making some patches using CTL1 and assigns to switch between Natural Clean amp and Matchless amp and other low/mid amps. I LEARNT THE ADANCED ASSIGNS SETTINGS FROM YOUR VIDEO ONLY!!!
Hi, latecomer to the GT-1 party here. Many thanks for your advice and tips throughout your channel. You are the YT guru for the GT-1!
Hey!
Thank you very much for your kind words - I really appreciate it!
Let me know if you need anything!
Cheers :-)
So - as a complete effects beginner - this is my plan.
After my GT1 unit arrives, I will first initialise the No. 1 user patch, and make it my own, with a name and all that.
Then, over the next few months I will live only inside this one patch. I will use it like a series of live stomp boxes and practise clean sounds as well as all kinds of distortions / effects, and combinations of various amps, ODs, effects, settings, etc. I will also try different settings on the wah pedal and ctrl button in the same patch. I will also try different outputs - to amp, computer etc. I will also try tones for different songs and song types.
Everyday, at the end of the day, I will save the patch. Next day I will modify and resume.
Once I have figured out a patch I like, I will “lock it” and save it. Then I will move to the next user patch No. 2 and start over, but by then I should have hopefully understood some basics of effects and the device itself.
Does this approach work?
Maybe this comment will help someone else
like me.
And, yes, thanks for all the super demos and advice.
Hi again!
Thanks for your comment.
Your approach is very good, it's important to get to know the effects and the unit itself.
Doing this will also give you an idea of what the individual effects will do and what it takes to dial in a good tone/patch.
Give it a good go, and let me know how the process goes.
Thank you for your kind words, they are greatly appreciated.
Cheers.
@@GuitarNTabs Great thanks. Will keep you updated. Cheers.
One thing I learned was you can bypass an amps tone control by plugging the gt1 directly into the return of the effects loop of your amp. It really makes the gt1 pop imho. Too bad you can't run time based effects through an effects loop
Hey there, Zach!
Thanks for your comment and words.
Exactly, using the Effects Loop Return is a great way of using the GT-1, and its onboard Preamp Models.
I've done that in the past, but have now switched to running it direct to the PA/Mixer - which is pretty much similar.
Mhmh, we're really missing an Effects Loop.. I've had that thought as well..
Just move the time based fx at the end of the signal chain after the pre-amp inside the gt-1 software. Has the same effect.
@@chrisfit Thank you! I'll give it a try now
@@MrZachalewel - The Time-based effects should already be placed after the Preamp, inside the GT-1. It should be like that default from the factory. That's the "usual" layout.
Cheers.
Can you do step by step on how to use the Tap Tempo Delay
I couldn't be happier
Thanks, I'm glad to hear that!
Please do let me know if you need anything else.
Cheers.
Great video! Enjoyed watching. I’m picking one of these up this evening and I wanted to kinda get familiar with basic start up. You touched on everything I was searching for. Thanks. Ps has anyone ever told you that you sound like Elon Musk? I could’ve swore that’s who I was listening to. 😂
Thank you so much for your comment, I greatly appreciate it!
Please do let me know if you need anything else.
Haha, I've actually heard that a few times before!
Have a great day.
Cheers.
You have helped me greatly!
Cheers, I really appreciate it!
Let me know if you need anything!
All the best.
@@GuitarNTabs wow man.. that's so kind of you
Thanks for sharing this video
Thanks it turns me to sleep
Thanks bro I’m a worshiper just new on guitar but I’m learning. Thanks for sharing this had like this pedal but don’t know how to dial thanks again.
You're very welcome, Franklin!
Let me know if you need anything!
All the best.
I’m looking for nice acoustic guitar for strumming thanks bro
@@angkit216 - There's a good factory preset in the GT-1, but I haven't tried to make my own... I haven't needed one, yet ;-)
Just replaced my Line 6 POD 2.0 yesterday and I dove right in and I'm already reaching for my old trusty magic bean. It's hard to get figured out so I hope this video will help me a little and I can retire my bean once and for all.
Hi there, Matthew.
You made a great choice of going with the GT-1, but you will have to spend some time getting to know it, and dial things in properly.
I'd be more than happy to assist, and help you get properly started.
Let me know what you need help with, and I'm sure we can figure something out.
Best regards.
Cheers.
Hi GuitarNTabs,
thanks for the quick answer. . .
if all things could be easy like this. . .
and thanks for saving my precious time,
struggeling with this prob
keep on spreading your knowledge
and see it grow up. . .
best whishes BuDuClan
Cheers, I really appreciate it, thank you!
Please let me know if you need anything else.
All the best.
Excellent video. I'm a hobbyist who plays at home and don't intend on playing live at bars or whatever and I really like this multi-effects processor. I pair this with my Yamaha Pacifica PAC112J and Gretsch Jr. Jet Club 2215 P-90 and it gets me close enough sounding tones and effects to play all my favorite songs mostly 90s- early 2000s alternative rock.
Hi there, MH.
Happy New Year.
Thanks for your kind words, and for watching.
That sounds great! I'm glad you enjoy the GT-1! It's an excellent piece of gear - I'm still very happy with mine!
Rock on and stay safe.
Cheers.
Hi. Great vid. Can you suggest a good db meter, or the one you actually used to calibrate levels for all your patches? Thanks in advance. Keep up the great work. 👍
Hi Steve,
Thank you, I appreciate it.
The dB-meter I use is a rather old one, from a company called DK Technologies and the series is their "MSD". It can only be found used these days.
Another option is to use the dB-meter of a recording software, like Audacity or Cubase. I've done that, and it's alright, the rest can always be tweaked at the venue, etc. if needed.
I hope this helps.
Best regards.
Subbing! Awsome tutorial. 👍
Thanks, Oliver, I greatly appreciate it.
Rock on!
Thank you for the video, this is what i m looking for. I m using studio monitor and focusrite 2i2 to my imac using garage band, what output should I use for my guitar. Q2. Let say I want to used Blues buddy and the next the for the chorus is bark tone so how do i set it, rather than stepping on the pedal for so many times to reach the bark tone, thanks
Hi there,
Q1:
There are several ways you could do it, for example, arrange the two patches so they'll appear right after each other. You do this by moving one of the patches right before or after the other patch. Another way, which would probably be a lot quicker and better, is to create both sounds within one single patch, by using the GT-1's Assigns. I would prefer the last option - they Assigns are killer!
Q2:
The Output Select should be Line/Phones, always. However, if you change setups, then you need to change the Output Select along with the setup. Also, when using the Line/Phones setting, you're using the GT-1's onboard preamp and speaker models, but you shouldn't be using those when using a regular amplifier. Create separate patches for different setups, that's very important.
I hope this helps, let me know if you need anything else.
Best regards.
@@GuitarNTabs thank you,
Dear GNTabs, I recently bought a GT-1 because I needed a light, self-powered unit with little power drainage to use it open air (I connect it toa Mackie Thump GO battery powered monitor). I stumbled upon your channel and immediately subscribed, thanks for the wonderful and useful videos you've been posting so far. I particularly thank you for the video using directly the built-in software (when I'm outdoor I don't carry my laptop). I'm currently watching your GT-1 video series but I'd like to ask you some questions, if you have the time to answer. That is:
1. I have a Roland F6 pedal, I'd like to use it as a bank up/down for the GT-1. But first of all, is it possible to group patches on the GT-1 (as it is the case for the GT 100) in banks?
2. Is the built-in cabinet simulation automatically engaged when the GT-1 is on line/phone output and connected to a line speaker ? or do I also need to insert a jack head into the phone output in order to engage the cabinet simulation (i.e. that was the case of the BOSS ME 25)?
3. Have you ever tampered with the Guitar sim effect in order to improve the tone of the patches? I have a guitar with active EMG pickups (Lukather set) and sometimes I struggle to get good distorted tone (after having played valve amps for a lifetime my ears are biased) from multifx...almost by chance I've noticed that the guitar sim engaged with a Marshall tone in the GT improve the signal much better than a light boost without spoiling the GT-1 basic recipe for the modeled amp.
Happy if you maight fidn the time forn anaswer and grateful anyway for your useful videos..cheers
Hi there, Obenda Perkins.
Thank you so much for your comment and question, I greatly appreciate them!
Also thank you for subscribing - I'd be happy to assist.
1. The GT-1 doesnt have banks, like the GT-100 does. But it basically works just the same. If you want your FS-6 to toggle between patches, up and down, then all you have to do is:
Press the "Memory Edit" button, scroll until you see CT2 and CT3. Start by placing the cursor on the CT2 icon and press the Enter button. Now you will access the setup menu for the CT2 footswitch, which is one half of your FS-6. Scroll through the function options, untill you see "NUMBER +1", then leave it at that, and press Exit to return to the signal chain. Do the same for the CT3, but set the function to "NUMBER -1" and you'll be good to go. This is a great way to do it, especially if you want to have the UP, DOWN and CTL1 onboard the GT-1 to do different things.
2. I believe so, yes. You should just connect your equipment, set the Output Select to Line/Phones and check if the "PREAMP" button is engaged - if so it will light up red.
3. I have played around with it a little yes, but to be honest it won't magically make your patches sound better. What really will make your patches sound better is to keep proper volume and gain levels, between effects, preamp, etc. The Guitar Sim can be "alright" if you're looking to mimic a Les Paul, while playing on a Strat, but it won't really be all that good... Also, you'll sacrifice an effects block, like the FX1, for example, and I just don't think that it's worth it. So much can be achieved by setting proper levels, gain stages and by actually tweaking each effects' dedicated EQ and Tone parameters.
I hope this answers your question, but if not, then please get back to me, and we'll take it from there.
Thanks again for reaching out, and for subscribing, I'm grateful for it!
Have a splendid day.
@@GuitarNTabs Thanks a lot, your answers are incredibly helpful! LEKKER! (is that correct in Dutch?)
Ciao!
@@obendaperkins5574 - You're very welcome! I'm always happy to assist.
Haha, I'm actually from Denmark, but it's pretty close still!
Let me know if you need anything else.
Best regards.
@@GuitarNTabs Sorry, then LÆKKER !!! I've been once in Denmark, in the south near the border with Germany (trip was to visit Lubeck). Liked a lot! Thanks again for your kindness, if I have other doubts I'll ask (but first I wnat to watch the other videos, maybe the answers is already there). Have a good day
@@obendaperkins5574 - It's all good, you got it right!
Sure, no problem at all, I'm always happy to assist!
Have a great day!
Cheers.
Thank You for all the great videos .
Thank you, Mark, for watching and taking the time to leave a comment. It's greatly appreciated.
Let me know if you need anything else.
Have an excellent day.
Great video. To summarise.. this is a great pedal but you NEED TO set it up properly and tweak it for it to sound good!
Thank you, I appreciate it!
YES, you are completely right!
It's not just "Plug&Play" it will require some time spent, getting to know the different operations.
I'm pleased to hear that you get it!
All the best.
Very well done video ! I would like to thank you for your time and efforts, to helping others such as myself , to better understand the importance of the initial set up process . much appreciated !
Thanks, Tony!
I greatly appreciate your kind words - I try to do my very best.
Have a great day.
Cheers.
Thanks! That's more than I was hoping for
Thanks, I'm pleased to hear that!
Let me know if you need anything else.
Best regards.
@@GuitarNTabs keep doing your thing, your insight is very valuable to less experienced musicians - you go straight to the point and break things down for us, please (:
@@lokhistormborn4165 - Thank you, that's very kind of you, and it makes me happy to hear!
I have a lot of ideas for new content and videos, for the GT-1, so don't worry! I just need the time, haha!
Your kind words are greatly appreciated.
Let me know if you need anything.
Have an excellent day.
All I want is a beautiful crystal shimmery tone for clean, and a beautiful punchy distortion ! I’m the guy searching for his tone
Steve, how are you using your GT-1?
Knowing that will help me guide you.
Thanks.
Wow very fast on the answers! Thanks a lot! Keep soin what your doing, its good! Take care
No problem, Paul :-) You are very welcome.
Thanks, it means a lot to me, I will!
Have a good one & take care. :-)
I have had this for one week and it has been used for two live shows (8 hours total). It is performing well with some tasteful gain and clean tones that I programmed in. I found that leaving the cab simulation on original sounds best when going direct to the PA (and back thru a stage monitor). There seems to be limitations with quickly raising the overall volume on certain patches. I thought that knob 2 ( channel volume ) or knob 3 ( output volume ) could easily give me lots of control over volume but it does not.
I think that if certain effects are used in the chain that have volume cuts they will control everything thereafter ? I want all of my patches to have lots of volume control with the two knobs I mentioned. I also have to figure out how to assign things to the control switch.
Hi there, Musicistherapy.
Thanks for your comment and experience - I appreciate it.
I really like to switch between the different cabibet options - especially the 1x10" and 2x12". Doing that can really add some new flavour to the sound.
Raising the volume how? What are you trying to, or want to achieve, with raising the volume? Solo boost, or just more volume?
When using effects in your patches, and signal chain, then make sure to always level them out with the rest.
Find yourself a "target level", for example the level of the preamp model you use, and then match the remaining effects to that, so keep things consistent. I do that on all my patches, and it's so important.
Assigning to the control switch - which control switch? The EXP switch, or?
Let me know.
All the best.
GuitarNTabs first of all. I haven’t properly thanked you for your videos. Your dedication and thoroughness in these videos is a rare find. Without your videos I would be way behind.
You diagnosed my problem exactly. I went thru all of my user patches and set my preamps at around 75%. I would highly recommend going up to this level to get the most quality “tube like” sounds. My lack of volume control at my live shows was because of user patches with different preamp levels. Silly mistake on my part.
Since I made my post I watched your video on how to assign things to CTL 1 (the red button when pushed on). I can now go from clean to dirty or use CTL 1 for one or multiple effects. That video was an amazing help.
@@sticksnstones23 - Hi there.
Thank you very much, I greatly appreciate your kind words!
I'm pleased to hear that my videos did help you - fantastic!
I see - it's so important to get the levels right, and consistent! Otherwise things wil lget out of control...
The overall sound quality of the patches will also be better, when things are leveled out.
Fantastic, that's great to hear! Indeed, the CTL1 and the assigns is a great feature, and I use them all the time!
Enjoy it all, and rock on!
Let me know if you need anything else.
All the best.
is the pitch shift polyphonic? can it do the job of the Digitech Drop? can you use it intead of it for E flat tuning(GNR,NUNO....) thanks
Hey!
I can't find information about whether it's polyphonic or not, but you can adjust the Pitch Shifter to do tuning up or down.
hi there great video thanks for all the info. I have mine hooked up too the jc120 for output I have it hooked up too a marshall dsl 40 1x12 amp is this the proper setting for the amp or should I use a different output like small amp or combo
Hi there, Shannon Hodder.
Thanks for your comment and question, I appreciate it.
I would recommend changing the Output Select to Combo Amp, if you're plugging into the front input on your Marshall amp.
Another question, how do you wish to use the GT-1? For effects only with your own amp, or for both effects and preamp models?
Cheers.
@@GuitarNTabs thanks for the reply I really cant say enough about this pedal already just from owning it a day. I am currently using it as my main effects pedal as I find trying to hook my boss gt8 pedal with it as well is a bit confusing. cheers
@@shanobi1kanobi - You're very welcome!
Indeed, it's a great pedal, and the possibilities are endless!
Seems like a good start, then just plug it into the front input of your amp and set the Output Select to Combo Amp.
I can see that, and honestly I think that's a bit too much, since both units are capable of the same things, plus/minus some years apart ;-)
Good video. Thank you
Hey there, Ian 😊
Thanks for watching, and thank you for the nice comment - I appreciate it!
Let me know if you need anything else - I'd be happy to help out.
Have an excellent day
Best regards and cheers!
Hi I love your videos and have learned a lot from them but I have a question. Just recently I starting using the Tone Central. On some of the patches I noticed the initials PrA that shows up to the left of the note at the top right of the display. Can you tell me what that is and what it's for? Thanks
Hi there!
Thanks for your comment and kind words, I really appreciate it.
PrA is the solo boost function for the GT-1's onboard Preamp. It can be assigned via the footswitch (CTL1).
The PrA will add a boost in volume and certain frequencies.
I hope this makes sense.
Cheers.
Thank for the video! Would it unit work only as an effects and expression pedal unit if I connected it to a Tonex? So Boss for effects and pedal and Tonex for the amp sounds.
Love your videos learning a lot about the gt 1, have a question about the display how do you change it to display larger patch numbers, keep up the great videos
Thank you, Lee! Your kind words are greatly appreciated!
Great question, and also a simple one; simply press the Enter-button. This will change the display.
I hope this helps.
Let me know if you need anything else.
Best regards.
Wow so simple, thanks for your reply
Awesome vid. Very detailed.
Please make one for BOSS ME-80.
Thanks.
Thank you, I really appreciate it.
Sadly I don't have an ME-80, but if I had, then I would make some videos.
Have a great day.
Great video... much appreciated! Question: which decibel meter did you use to set your levels? Cheers!
Hi there,
Thanks for your comment, and kind words, I greatly appreciate it.
Sometimes I use the channel meter in my Cubase DAW, and that works pretty well.
When I really want to dial things in, I use my trusty DK Audio MSD100 dB meter, and that's spot on.
You can get apps as well, but the overall quality will vary. The channel meter, in any DAW; would be a good place to start.
I hope this helps.
All the best.
Cheers.
@@GuitarNTabs thanks, brother, for such an in depth answer... I really appreciate it!
@@guitarbluz62 - Sure, I'm happy to assist.
Let me know if you need anything else.
All the best.
Thanks for the video. Just picked one up yesterday and loving it. One question about external foot switches. Do you know of any inexpensive non-boss footswitches that work on this unit? Behringer perhaps? Thanks again. Your tutorials helped me set up my first patch and assign all of the desired effects and pedals without much hassle.
Hey there, Chris!
Thanks for your comment and question - I appreciate it!
Hmm, actually I don't... I've always used Boss footswitches.. First the FS-6 and now the FS-7.
But, there should be plenty of inexpensive footswitches out there - specially from Behringer, I assume.
Thanks, I'm pleased to hear that you found my videos helpful. Feel free to get in touch, if you need anything else!
Happy New Year & Cheers.
Hi - thanks for all that useful informations !
Will you please reveal the wisdom
how to get BIG PATCHNUMBERS in the display . . ?
I hope you can answer
carry on
Hi there,
I'm glad you found the video helpful and informative!
Simply press the ENTER-button, this will switch the screen display.
I have a Question for the Output Setting. I normally play over Headphones or plug the GT into my Laptop. But now I want to start using it for Practice. My plan is to just buy a speaker so I can use the Preamps from the GT-1. But what Output Setting do I have to use if just want to use a Speaker without an Amp?
Hi there, Michael!
Thanks for getting in touch, I appreciate it.
It all really depends on the equipment/speaker you choose, to be honest, but mainly Line/Phones, since you're using the GT-1's preamp models.
I might add one thing.. That speaker should not be a "regular" speaker.. It has to be something like FRFR (Full Range Flat Response) or a speaker suited for multi effects units.
Which speaker did you have in mind?
Cheers.
@@GuitarNTabs Thank you so much for your quick response!
Okay, thanks for the information. I still have to read myself into it, I don't know which speaker I'll use yet.
@@michaelmoser3483 - I'm glad it all worked out!
Have you decided on a speaker, yet?
Cheers.
A note for first time users on a PC using Windows 10. The Boss site says that W10 will automatically install a driver when you connect the GT-1 to your computer using a USB cable (you must also have power and connect the guitar cable to the input jack to turn it on). The Boss tone Studio software (download from the Boss.info/us site) requires the driver to be installed before running. If it says there is no driver then close the app (click offline then close), go to the Device Manager in Windows (right click on the lower left Window icon > select Device Manager). In the Device manager you should find the GT-1 listed in the device list (probably in the Sound, video and gamer controllers). Right click on the GT-1 and update the driver, you must have an internet connection. This should fix the problem. After installation, you can open the Tone app again.
Great vid. Thanks for sharing. Can you please help me to find the pitch shifter?!🙏 I’m searching for 2 days now🤪
Hey there, Mehmet.
Thanks for your comment and question, I really appreciate it.
The Pitch Shifter can be found in both the FX1 and FX2 effect blocks, in the signal chain.
Press the MEMORY-EDIT button, and scroll to find either FX1 or FX2, and use the TYPE parameter to scroll through the different effects in the FX blocks. The Pitch Shifter will be there.
Let me know what you think.
Best regards.
Is it possible to use the expression pedal of the GT-1 as a volume pedal to do swells combining delay / reverb / volume pedal ?
Sure, the EXP pedal will be able to do that.
It's just a matter of having the delay and reverb set up, and rocking the EXP pedal.
Cheers.
Brother, I'm a very honest person and gotta tell you too much talk!
Cheers, I appreciate it.
This video is over 3 years old now, so things has changed since then, and I'm working on a few things, in regards to new videos, but thanks for sharing your opinion.
All the best.
I found it informative, but it'd been good to provide a play through brief in a few sections where appropriate, just a quick riff or lick.
But, still a good explanation.
Hi there.
Thank you, yes I agree, but at the time I didn't have the proper setup to do so... I was mainly focusing on getting the content through.
Luckily I've incorporated this since.
Let me know if you need anything.
Cheers.
Hey i bought one yesterday ... I am a bit confused ... When the expression pedal is pressed only then i am able to hear the patches ... when i take it back to heel position ... the sound is gone :/ and this is for all the 99 patches ? is there a way to fix it ?
That's how the expression pedal works - it control the volume for the patches. At toe position it's full volume and at heel position it's shut off.
Why would you want to change that? Do you want the EXP pedal to do something else??
The expression pedal can be assigned different fx. When you get to a patch use these to change assignment: Memory Edit - (use the 1 knob to move the effects chain cursor to PDL) and then use the Enter button (second button from right) and you'll have the option of changing the pedal function to these: Cry Wah, Vo Wah, Fat Wah, Light Wah, STR Wah, Reso Wah, and Pedal Bnd. If there isn't a Pedal FX assignment it defaults to a Volume Pedal. Use knob 3 to turn on or off in the effects menu chain. If you edit using the software by Boss it's also easy to change assignment in software.
Hi! I just purchased my gt1 5 days ago, I wonder if u could make a video on how to make patch with the pedal assigned as wah, thank u in advance and more power 😊
Hi,
Sorry for the late reply!
There's a few videos about the Wah pedal, so make sure to browse my channel for those, I'm sure they'll help you out.
Let me know if you need anything else.
Best regards.
Great stuff thanks!
Hey there!
Thank you, I appreciate it!
Let me know if you need anything!
Best regards.
would this be a overkill for a intermidate player?
Not at all, the GT-1 is perfect for all sorts of player level!
I can highly recommend it.
Let me know if you need anything else.
@@GuitarNTabs one million euros in a suitcase please
@@goggleboy2464 lol
Great videos on GT-1 setup :) Which output mode do you think would be best for a Roland JC-22 amp? thanks, Derek
Hi there, Derek!
Thanks for your comment and question, I appreciate it.
The Output Select should be set to JC-120, if going straight into the JC-22's front input. If you're going through the JC-22's Left and Right Effects Loop Return, then set it to JC-120 Return. Let me know how you have things connected.
Cheers.
@@GuitarNTabs Thanks for the quick reply - after watching the video I went for JC-120 Return as I now connect the GT-1 to my JC-22 via its FX Return input. Thanks, your video tutorials are the best!!
@@djwindhoek - You're welcome!
Great choice, that's a good way of connecting things, if you want to use the GT-1's onboard preamps. Connecting through the Effects Loop Return will bypass the amp's preamp-section and only leave the speaker running. So I take that's how you're using it.
Also, take full advantage of the stereo Effects Loop Return by connecting the GT-1's left output to the fx loop return's left input, and the right output to the fx loop return's right input. That way you chorus, delay, etc. will be output in stereo.
Thanks for the kind words.
Let me know if you need anything.
All the best.
Great video.. thanks man.. can i ask favor.. how to set up this gt1 with the song like a stone.. there is clean for the first.. and go to the adlib with the pedal.. thank you for helping me this
Hey there, Edgar :-)
Thank you very much for your kind words, I truly appreciate it!
Like A Stone? By what artist? :-)
Let me know - cheers :-)
@@GuitarNTabs Hey man, The Artist is Audioslave. Amazing song. And yes i would love to know the answer to this question too.
@@SolidXdamage - Thanks for pitching in, Duct Tape. I think Edgar forgot about his comment.. Well, I'll look into it, and see what happens 😊
Cheers.
I can not assign the patches for example (tera echo) and others.
At the pedal up and down footswitches. up the first down the second
Thanks very much for support
Assign patches? Do you mean that you want to assign certain patches to the different footswitches??
If that's so, then it's not an option... But by using the available assigns you can have most of what you want, all in one patch, if that's what you want :-)
Let me know what you think.
Cheers.
Is there a way to set/change the response time while using the looper? For example when I record something using the Looper, there is a bit of a pause after the loop plays, instead of going right back into it.
Hi there, Joshua!
It all has to do with timing, when you start and stop the loop - you need to count the beats, and end on the same.
The timing is off, and that's why the pause is there...
I hope this makes sense.
All the best 🎸
@@GuitarNTabs Yes that made perfect sense! Thanks a lot!
@@J.s724 - Sweet!
Rock on!
Hi is there any chance of a video on how to set up the feedbacker so you can use it momentarily by pressing CTL
Hi there, Paul Bellucci.
Thanks for your comment and question, I appreciate it!
Sure, I can make a video about it - but I can do one better, since it's pretty simple.
Press the MEMORY-EDIT button, scroll to find the CT1-icon, then press ENTER.
Set the FUNCTION parameter to FX1 and change the MODE to MOMENT.
Then go to the FX1 block and select the FEEDBACKER, and adjust its settings to your desired requirements.
Now, press and hold the CTL1 footswitch, the FEEDBACJER will be activated, and then let go, and the FEEDBACKER will be deactivated - just like you need it to.
Try it, and let me know how it goes.
Best regards.
GuitarNTabs i only just saw your reply . Thank you so much I really really appreciate it. It is a feature I really want to use . Hope you have a healthy happy new year and great prosperity . Sincere best wishes . Paul
@@Havanacuba1985 - Hey there, Paul.
Sorry for getting back to you so late...
I'm glad that you saw my reply, and that it helped. The Feedbacker is actually quite good, I've found. Especially if you dial it in just right! I hope you have fun doing so.
I'm all good, and I hope the same for you.
Let me know if you need anything else!
All the best & Cheers.
is there a way to turn the preamp off completely? Do I need to push it off/on when I want to use it or not? Or are you saying this is when I would do it in user patches individually? I only want to use the Boss pedal effects connected to an simple amp head set to a clean channel on the amp head & 2x12 cabinet. thx
Hey, Stephen.
Thanks for getting in touch, I appreciate it.
You disable the PREAMP by simply pressing the button once, so that the red light goes out. That means the PREAMP is now OFF.
If you only want to use the effects in the GT-1, then you have to disable the PREAMP for each patch, like mentioned above.
Also, make sure to set the Output Select properly, matching your equipment.
What amp and cabinet are we talking about?
Cheers.
@@GuitarNTabs ok,thx. I thought that by the way that you were explaining the preamp could be turned off for all patches w/o having to do it individualy.
Awesome tutorial but I don't know how turn the pedel into a wah
Can i connect to fender champion 20?
Sure, you can connect via the amp's front input, like you normally would. Just make sure to turn OFF the GT-1's PREAMP-button.
Also, select the proper Output Select, so that it matches your amp - in this case Small Amp.
Anything in particular you're looking for?
Cheers.
Hello man, I would love to know how to set up a good sounding metal sound using the GT 1. I was planning on making some demos and had to fit a very tight budget. So ended up getting a GT 1. Because i dont have a reference and as i have not used any other multi fx, i dont know how to achieve a tight sound. Please help!
Hey there, Duct Tape!
Sorry for the late reply..
Hmm, I haven't done any metal sounds/patches... If you use the GT-1's onboard preamps/cabinets, then try some of the heavier preamp models, like the SLDN, 5150, Orange Rock, etc. They might be able to get you close.
If you use your own amp, then it's important to set it up to sound the way you want it to, and then add the desired effects from the GT-1.
Good day, I want to set clean sound with reverb(room) and little compression.then after that I can ON the OD Solo through CTL1 which Will contain delay and reverb different from the clean?
Hi there.
Thanks for your comment and question.
Yes, that can be done, by using the GT-1's assigns.
Let me know if you need anything else.
Cheers.
Does the GT=1 have empty banks to store your own patches? Also, I have a request. I have a Les Paul Traditional and a Marshall DSL-40C; how would i setup the GT-1 and amp to achieve the sounds of Billy Gibbons in Tush and La Grange? Could you provide me with the settings? Thanks! Excellent tutorial by the way!
Hi there, Phil.
Thanks for your comment, and for watching, I greatly appreciate it.
The GT-1 has 99 Factory Presets and 99 User Presets. Both are labeled differently. The Factory Presets are displayed with a "P" and the User Presets with a "U".
You should use the User Presets, when making your patches, because you're able to store the settings and change effects, etc.
Thanks for the request.
First of all you would need to set the Output Select to Combo Amp, and make sure to disable the GT-1's onboard Preamp. When you use your own Amp, you shouldn't use the onboard ones, so press the PREAMP - button to turn it off.
Once that is done, you need to set up your Marshall Amp, so it sounds close to the tone you're after. Listen to the songs/records, maybe do some gear research and then start dialing in your amplifier. I would recommend doing this with just your Les Paul connected to your Marshall's input. Once you're satisfied, connect the GT-1, and apply the effects you need. Perhaps some Compression, light overdrive, reverb, etc.
That should get you started good.
I hope this answers your question, but please let me know if it didn't.
Thanks for your comment.
Looking forward to your reply.
You must be a Dane :D Thanks for the demo
Sure, I am! I assume you're as well? 😊
Cheers, no problem!
@@GuitarNTabs Nope but I live in DK now (my wife is dansk)
@@Cheguebuddha - Aaah, I see!
Enjoying the GT-1, or?
Hey man! Thanks for the great video! I bought the GT 1 but i am going to use it on my violin! Can you please make for us a video explaining more how to make sounds and download them on the Gt1 to use them in my violin! Thanks a lot
Hey there, violoniste kamanja :-)
Thanks for your comment and request, I appreciate it.
Oh wow, that's very interesting! A while back I had someone asking about the GT-1 for Cello - also interesting!
I can definitely make a video about how to make patches, sure, but I assume that your violin is electric, right? :-)
Looking forward to hear from you.
All the best
Cheers.
That's right, it is 🎻😊 i am sooo excited to play music on my violin with GT1 and i wish your help, that will make it fast and ditermined! Many thanks for your replay 🤗🤗 Wish you all the best ✌👍
violoniste kamanja - Nice, I'm sure that's going to be just great!
What will you be playing through? Studio monitors, speaker, amps, etc?? :-)
Looking forward to hear from you.
Cheers.
Very good explanation on the output select feature.. Meanwhile i found a peculiar behaviour and i need your help now.. I use a Line6 spider iv 15w as my main practice amp as well as for developing new patches.. But when i used the output select on small amp as it should be.. I found the sound very muddy compared to the line phone option that i am using now.. After using this option my amp sounds very clear and good. Is there something wrong with my amp?
Hi there, Colossal Corp.
Thanks for your comment and question, I appreciate it.
I'm glad you like the video, cheers!
When selecting the Small Amp setting, did you remember to disable the GT-1's onboard PREAMP-block?
That may be the issue...
Let me know.
All the best.
So does anyone know how to change the order of the patches? IE move U26 (creamy set) to be after IE U50 (70s US hard rock) for a set etc. so you don't waste time between songs fumbling for the right effect/patch
Hey there, Sofie 😊
I have another video, for the GT-1, about saving, changing and exchanging patches - link here:
ruclips.net/video/YgzM8fr8Lyo/видео.html
That might help you out. If not, then please let me know.
Best regards & Cheers.
@@GuitarNTabs Holy fuck this is perfect! Thank you so much. I've been googling the hell out of this the last hours and this is just perfect! Thanks
@@sofiehaga - Haha, thanks for making me smile, Sofie! 😊
I'm pleased that you found the answer! It's great when things come together!
Also, thank you very much for subscribing, I truly appreciate that.
Rock on, and feel free to let me know if there's anything else I can do.
Have a great day
Cheers.
I’ve got a question- if I’m using a GK-400RB head with Hartke 210XL speakers, would I need to use the headphone/line setting as my output, or would I use amp with no tweeter?
I’m not seeing it in the manual and I’m a drummer who plays a little bass, so I’m not very up to speed on the technical side of things with amps and heads.
Hi there.
Thanks for your comment and question, I appreciate it.
If you're going to use the setup for bass, then plug into the GK's main frony input and set the Output Select to Stack Amp.
Make sure to turn off the GT-1's onboard preamp block.
I hope this helps.
Cheers.
i have a roland cube street EX (10/20/50 watts depending the mode you choose) and a marshall mg15 cdr (15 watts). I should configurate the boss gt-1 on "small amp" or "combo amp"??
Hey there!
Thanks for your question :-)
I would set the GT-1 to Small Amp - on both of your amplifiers. They are not quite the size of a combo :-)
I hope this helps :-)
Cheers!
Hi there and thank you for all your videos regarding the GT-1 - very informative! I have two questions that you might be able to answer. 1. I miss the high/low cut feature in the parametric eq that are available on e.g. Katanas. Are you aware of any update version of the GT-1 that have this feature?. 2. I've also read that the GT-1 transmits only midi cc#7 (volume) via USB-midi, but do you know if it can also transmit midi patch change via USB-midi? Already aware of the receive features via MIDX-20 but that's in the other direction. Cheers!
Awesome video. I will be connecting mine to an Orange CR120H Amp with an Orange 4 x 12 Cabinet, what output setting do you suggest? I will be taking to the Return input of my amp BTW.
Hey there.
I would recommend setting the Output Select to Stack Amp Return then. That would nicely match your connection and equipment.
I hope this helps.
Best regards.
@@GuitarNTabs thank you!!
@@scbene - Sure, no problem at all.
Let me know how it goes, and if you need anything else.
Cheers.
Please, could you explain how to set master EQ parameters? Thank you very much
Hey there!
Yeah, sure!
I'll add it to my video list!
Stay tuned, and make sure to subscribe :-)
Let me know if you need anything else.
Best regards.
Hey man, great stuff! I have probably a silly question but I need the answer. I have a focusrite scarlett sound card. Can I connect GT to focusrite and then to my computer or? I have a small home studio and need the guitar processor so I’m collecting info.
Thanks in advance!
Hey there, Bojan :-)
Thank you for the question and for watching my video - I appreciate it!
Hehe, no such thing as a silly question ;-)
Actually, the GT-1 itself has a USB-port, which you can connect to your laptop, etc. and record that way.
But yes, you can also run it through your Scarlett sound card, that should be no problem, but the above-mentioned method would be a little easier :-) Guess it all depends on what you need and desire.
You made a great choice of going with the GT-1, trust me. It's and excellent piece of gear, and the effects and preamps are great!
I'd be more than happy to help out, if you need any further help.
Are you planning to use the GT-1 for effects and preamps, or? :-)
Let me know what you think.
Cheers! :-)
GuitarNTabs thanks for such a thorough answer, man, really appreciate it! :)
I plan on using it for recording in my studio, mostly for grunge, hard rock and heavy metal style of music. I am using Bias FX now but I am not satisfied with my distortion sounds so I really need something more serious!
Hey again, Bojan :-)
You are more than welcome, no problem.
You're always welcome to ask for help, if you have questions :-)
Aah, I see - good choice. The GT-1 should be excellent for that!
I'm sure you're going to like the GT-1 - just spend some good time with it, and you'll truly see what it can do!
Let me know if you ever need anything!
Have a great day
Cheers.
Excellent Bro ❤
Thanks, Patrick.
Have an excellent saturday.
Cheers.
Hello! Congratulations on the great video! I saw that gt-1 has ctl 1,2,3 and 4. How to use the 4? Is there a footswitch with 4 triggers? Thank you very much
Hello :-)
Thanks for watching my video, I appreciate it!
The GT-1 only has CTL 1, 2 and 3 available.
You have CTL 1 on-board the GT-1, next to the volume pedal.
CTL 2 and 3 are available if you buy and connect either the Boss FS-6 or FS-7 footswitch.
I would highly recommend the FS-7 - it's much better and smaller in size :-)
Also, you need a TRS jack cable in order to make the FS-6 or FS-7 work with the GT-1.
Connect the FS-6 or FS-7 to the CTL 1,2 / EXP input on the rear panel of the GT-1 :-)
Hope this helps - otherwise let me know :-)
Cheers!
How do get to "manual mode" I want to use the three toggles like individual stomp boxes.
Hi,
Press the Memory-edit button, scroll all the way through the signal chain, and find the UP and DOWN icons. Then change their functions, and that'll do it.
Cheers.
Thanks a lot for all your videos about GT1. I found them very very helpful!!
I'm going to buy a GT1 soon, just a question: which power supply do you use or do you suggest to buy?
Andrea, thanks for your comment, and thanks for your kind words. I truly appreciate them! :-)
You made a great choice of going for the GT-1! You won't be disappointed!
I highly suggest that you use the Boss/Roland power supply - the Boss PSA230S or PSA230S2.
You should only buy a power supply that's made by Boss, because those will fit the unit, and not cause any damage to them :-)
I hope this he,lps you - if not, then let me know :-)
Regards.
Thanks a lot for the correct name you wrote me! I wasn't able to find it anywhere.
Anyway some people suggested me the TrueTone 1 Spot power supply that seems to be the best. 1 Spot is it even more powerful and the price is the same of Boss.
What do you think about it?
If you go to the Boss/Roland webpage, and find the GT-1, then click Accessories, then it should be there :-)
It might also be called PSA-120S, if you're in USA.
I guess the 1 Spot would be able to do it.. I haven't used one, so I can't really tell properly..
Just make sure to check the requirements of the 1 Spot, and make sure it matches the requirements of the GT-1 :-)
I would always use the Boss compatible one. That way I know I'm giving the unit the power it needs :-)
Many thanks for your precious suggestions!! I'll think about it.
You are very welcome, Andrea :-)
Feel free to get in touch, if you need anything else :-)
Cheers!
Kudos on the great tutorial!
Keep it up
Thank you, I greatly appreciate it!
Thanks for watching.
@@GuitarNTabs I’m currently in a situation where I have the option of either buying a new GT-1 for 210$ or a used GT-100 with a case for the same price.
I’m leaning towards the GT-100 because I want to use it with my tube combo amp for home practice and recording without any of the preamp or speaker emulation on the GT-100 using the 4 cable method.
I’m a bit worried that I will spend time fiddling with the unit rather than playing. Would recommend the GT-1 or GT-100 for the same price?
@@manhalnaddour125 - Hi again!
Aha, that's a very interesting situation.
In general terms the GT-100 and the GT-1 are almost identical, except a few missing features on the GT-1.
The GT-100 has the onboard FX Loop, for 4 Cable Method, Dual Signal Paths and the option of having two preamp models within the same patch.
The GT-1 doesn't have all this, since it's a more "stripped" down version, etc.
Well, if you don't want to use the onboard preamps of the unit(s), and rather go 4 Cable Method, then the GT-100 is the choice, because the GT-1 doesn't have the FX Loop.
And, with the 4 Cable Method you can actually have "best of both worlds", because you can switch between using your own tube amp and the onboard preamp models of the GT-100, using the S/R-block (Send/Return).
I love my GT-1, and I own the GT-100 as well, but I settled on the GT-1 mainly because of its size and compact form. As mentioned, effects, preamps, etc. are the same technology and firmware, so I still get the same effects, preamps, etc.
Every new piece of gear has to be set up properly, in order to get it dialed in just right, so there will be some of that...
From what you're telling me, with your tube amp, 4 Cable Method and not wanting to use the onboard preamp models, the GT-100 would probably be the best bet here.
It's hard for me to really tell, but that's the answer I can provide, based on what you've told me.
I'd be happy to assist further, just let me know.
I hope my response can be of help.
@@GuitarNTabs Thanks you so much for the detailed reply. I’m still going through your videos on both the GT-1 and GT-100, they are the best out there!
I have ordered both units and will try the GT-100 with the 4CM and the GT-1 in front of the amp and decide based on that. If there is not much difference I will send the GT-100 back!
The portability and size of the GT-1 makes it so appealing but I want to get the best sound out of my amp and the time-based effects that’s why I wanted to go with the GT-100 and 4CM.
Btw, have you tried the Boss ME-80? I have a couple available for a pretty good deal and I like the idea of it being simple (give me more time to play and less time to fiddle with effects)
@@manhalnaddour125 - Hi again!
My pleasure, I'm just happy to assist.
Thank you, that's very kind of you, I greatly appreciate it!
Nice, I'm sure you're gonna love both units, and this way you can give both a good try, and see what's going to work for you.
Sounds like you've got it all planned out nicely!
Exactly, that's why I went with the GT-1 in the first place, because of its size and compact design.
A gigbag with my two main guitars and the GT-1 in a pedalboard hardcase, and I'm ready to gig - it doesn't get lighter and easier than that.
I haven't tried the ME-80, no, but I can see your point! I'm sure the ME-80 will be/do just fine as well.
Let me know how it all goes, and what you decide, it's interesting to see.
Have a great day!
Cheers.
Hi, very detailed and informative, if your in to all of this, witch I am not so this is why I'm seeking
your help, Just bought GT-1 plucked into a Pedal Steel guitar to a Peavy Transformer 112 amp,
don't know if you are familiar with the very clean, deep, mellow kinda sound common to a Pedal steel but this
is what I'm struggling to achieve cos I have no idea where to start setting up the GT-1, maybe you can come up with
a setting to help me out. thanks
Eric, thanks for your comment, I appreciate it!
Well, you should be able to get something useful for your pedal steel guitar, I'm sure.
First of all, make sure you have selected the appropriate OUTPUT SELECT. Since you're using the Peavy 112, I assume your basically plugging into the front of the Peavy, right?
If this is the case, then set the OUTPUT SELECT to COMBO AMP.
When that is done, make sure you have a nice tone/sound going on the Peavy. You will basically have to establish that first, as your starting point. You know, your Peavy amp will be the 'base' of the whole patch - since the amp's giving you the clean sound. Adjust the EQ-knobs on the Peavy, dial in the reverb, and generally set it up, so you think it sounds good, or atleast close.
It may take several attemps, and a little time to think it all out.
When the Peavy is set up, I would start thinking about FX I might want to add.
Without knowing a whole bunch about pedal steel guitar tone, I believe something like a compressor, perhaps some delay and also an overdrive pedal could come in useful. Depends on the overall usage, of course.
How does that sound?
Try it out, and see what happens!
Let me know if there's anything else I can do - I'll be happy to help out!
Thanks & cheers! :-)
Can I use this without amp by just connecting processor and guitar with headphones?
Hi there,
Yes, the GT-1 can be used as a stand-alone processor, so via headphones is a great option.
Let me know if you have further questions.
Cheers.
@@GuitarNTabs thank you my g ❤️
Switch the output to headphones before you do it! I can't believe how good the headphones actually sound on this. It's the best sound using headphones I've ever heard.
Hello. İ want to take sound via my computer speakers. So i plug in my guitar into the gt1 input. And i plug the gt1 to my pc with usb cable. But there is no sound. İs there any settings about it on gt1 and on pc? İs that possible taking sound from pc speakers just with usb cable connection? Thanks.
Hey there, Levent Toykar 😊
Thanks for your comment and question - I appreciate it.
Your connections are correct, nothing wrong there.
Right off the bat I don't believe it's possible to output the sound from the GT-1 through your laptop's speakers - if you're using a laptop. Any form of external speakers should be good to go for that set-up.
Though, you can try, once the GT-1 is connected via USB, to go to the sound-icon, the lower right corner, on your laptop's desktop, and see if you can change the output for the GT-1.
Try it out, and see what happens.
Let me know if you need anything!
Have a great day.
Cheers.
Hi..
I want to ask a question..
It can be used as audio interface too??
Like can I connect my guitar to bias fx via this processor ??
I replied to your question on another of my videos.
Newbie questio: For studio monitors, do you recommend powered or not powered?
I have a pair of active (powered) monitors by Fluid Audio. It doesn't really matter, I just chose the active ones, because I knew I wouldn't have to move them around much, and had the power option to do it :-)
Cheers.
I'm currently rehearsing with a band and my lead guitarist is gonna use one of these (we bought it together). We rehearse in a space which has amps in it. Would you suggest my guitarist to only use the amp in the room and no preamp on the GT-1 (as is to just use for example OD, reverb, chorus and so on on the GT-1 but no preamp setting)?
I don't know what the case will be when we will do our first gig, but I'm guessing we will use the amps that the venue we'll play at have on their stage, which probably won't be the same kind of amps that are in our rehearsal space.
Hi there,
Thanks for your comment and question, I greatly appreciate it.
It's important to keep in mind, that what you're mentioning are two different ways of setting up the GT-1.
The GT-1's Preamp should only be ON when running to a Mixer, PA, Headphones or through an amp's effects loop return. Make sure the Output Select is set to Line/Phones.
The GT-1's Preamp should always be OFF when connecting throught an amp's front input. You will only use the GT-1's effects, not the Preamp.
I would go for the option you're most sure of, in regards to a future gig, etc.
If you wanted to be one the safe side, then make separate patches, some for the amp (without GT-1 Preamp) and some for the mixer (With GT-1 Preamp).
I hope this helps.
@@GuitarNTabs Thanks for the detailed answer! I think it will be of help. : )
@@mungofinalfi4480 - I'm pleased to hear that!
Let me know if you need anything else.
Cheers.
Hey my man very informative videos I’ve watched them like a bad habit trying to und Rostand this bias Roland product you are more savvy than their own tech support ! Can you please help me to understand how the virtual pedals are suppose& to be set up and how they work I’m new to this product an& it’s very contradicting please and thank you if you’ve the time thanks again for sharing your knowledge
Hey hey!
Thank you for your kind words - I really appreciate it!
Haha, I try to get as much out of the unit as possible, and it's just great to share it with other people!
Especially since some of these videos that I do, don't have their topics mentioned in the Owners Manual, which is a real shame!
I'll do my very best to help you, but when you say 'virtual pedals' what exactly are you thinking about?
Do you mean the different pedals and FX inside the GT-1? :-)
Cheers!
GuitarNTabs Hey that was quick man thank you. I’m referring go to that in the manual so calls it. But that’s all I can go on it’s foreign to me I’m a newbie so to speak and it’s nothing like the Me 80 for sure if possible can you elaborate on the control setups. As far as like let’s say the auto wah or hell I really don’t know what they have for that kind of effect i found the odd on their wed. site and I’ve called them several times to get a understanding but you know that sometimes when you don5 know what the correct terminology you get the wrong direction and I was very frustrated that you can only use I dbl. switch or expression it’s very misleading
Haha, trust me, I know how long time can be, when you're waiting on a reply! I try to reply as quick as I can :-) Okay, I think I know what you're asking for! A simple walk-through of the effects, signal chain and Expression options, right?
Alright, here we go:
First off, the GT-1 has all possible effects that you could possibly want, and more! As you can see on the front panel of the GT-1, you have the small black buttons labeled with - from left to right - FX-1/Comp, OD/DS, Preamp, FX-2/Mod, Delay and Reverb. Those buttons, if you press and hold it, will take you into that effect's edit menu. From that menu you can select what amp simulation you want or what OD/DS pedal you want.
On the other hand, if you just press one of the buttons once, then it will toggle the effect(s) on or off. It's basically just for easy editing on the fly :-)
So you scroll to a patch, and then start editing the effects, and have a listen to it.
If you then press the MEMORY EDIT-button, then it'll take you into the overall signal chain of that particular patch you're on. It will do that on any patch, once you press the button.
In the signal chain menu you can see what effects are on, move effects around and on some effects like Delay, you can select what type of delay you want - anything from Standard delay to analog delay to digital delay, and so on.
As far as expression features goes, you have the option to connect either a footswitch, for further control over your assigns, or a second expression pedal. You can only have one of the two, since the GT-1 doesn't have an input for both, so you would have to decide.
Let me know if this helps, or keep asking questions! We'll find a way to get it down :-)
Cheers!
Well not so much the effect review just a little insight on the expression effects and how to set them in the assigns and the trigger initiation? Never used them and never understood how to setup and use I’ve waited this long my friend take your time by all means and I really appreciate that would even consider 👍
Take a look among my videos, I have a video there showing how to assign to the EXP-pedal :-)
See how that works, and let me know if I can help you out further!
I'll be more than happy to help out, no problem!
Cheers!
I picked up a used GT-1, downloaded the manual and read it several times. I am using a Fender Twin Reverb Tone Master, so I set my output for combo, and turn off the preamp. Next, I set my output levels where I would like them, then push write, enter, select where I want it to go to user 1. Then I name it, push enter and initialize it. It goes to my User screen at User 1 and sounds FANTASTIC!!! Then I go back and do the same for my next effect. It also sounds fantastic at U2. But when I go back to my first setting U1, the levels
from User 2 have taken over the levels I set for User 1. What am I doing wrong? Please help me!!!!!!!!!
Hello there, John.
Thanks for your comment, I'd be happy to assist.
I'm not sure what you mean...?
Did you remember to save the settings on U1, before moving on to U2?
All the best.
Thank you for great review. Do you think it is worth to get digital amp like fender GTX amp instead of this?
Hi there, Babak.
Thanks for your comment, and kind words, I appreciate it!
Honestly, it all depends on what you're trying to achieve.
If you like, and want, the sound of the Fender GTX amp, and then only use the GT-1 for effects, then go for it.
However, if you like a portable rig, and want to use the GT-1 for both its effects and onboard preamp models, then consider connecting the GT-1 to a Mixer/PA or something similar.
I don't know about your set up, or if you play live, at home, etc.
I hope this helps.
Let me know if you need anything else.
Cheers.