X-Plane 11 - From Cold and Dark to Takeoff - Complete Tutorial - X-Craft E195
HTML-код
- Опубликовано: 19 авг 2017
- The latest in my series of Cold and Dark tutorials. Today we'll teach off to get the X-Craft E-195 (and E-175) from cold and dark to ready to fly and take her up over Canada.
Something went a bit wonky with the microphone at the end of the video so there will be some crackling when I talk. Don't know what that was all about and the damn autopilot still gets me every time! Enjoy!
NOTE: Many of the soundFX you will hear won't sound the same on your stock X-Craft E195. I have done audio work on my E195, using real sounds from a real E195 cockpit such as the avionics sounds and fire alarm bells.
PC Specs
========
i7 3930k @ 4.6GHZ
GTX 1080ti
32gigs G.Skill 2400mhz RAM
Numerous SSD Drives
Saitek X65F Stick and Combat Pedals 
Игры
"oooow, this runway is bumpeh" said no fsx player ever :)
HAHAHAHA
Many thanks for a great tutorial into the X-Craft e-195, particularly the less than straightforward MCDU.
Hi Captain K-Man Your tutorials are awesome. Thanks for your work
Thanks for watching! Glad I could help!
It's performance page not preference page Also you got the lights reversed. Nav lights go on when Ground power established, Red Beacon before Engine Startup
You shall turn on the APU before start the engines and turn on NAV lights at first, those steps are normally in every single aircraft, APU and beacon light is the last thing you should turn on
Lovely. I like your attitude and comments.
I try!
Great vid, i really recommand taking notes
Thank you!!! Just obtained the 175 and the 195. This helped alot!!! So, just totally disregard the default FMC in X-Plane 11. Good deal! I'm still learning the Autopilot myswlf!!!...LOL
I have the ERJ family and the FMC takes a bit of getting used to but it's not too bad though once you get the hang of it. The hardest part for me was understanding how to put in airways
GREAT tutorial - Thank you K-Man!
Most welcome!
21:54 Did you just said “Indigo” instead of “India”?
Awesome video, I love the ERJ Series, my country flag airlines flies the E190 so... I never knew how the MCDU had to be configured, but now I certainly do.
Thanks
Perfect tutorial, great help & very entertaining! Thanks a lot! LOL@Blame Canada.
Glad I could help!
Awesome tutorial and review as always. Learned quite a bit. What makes the SSG 170 better-is it just the sound package? Your tutorial has made me want one in my fleet-just not sure which one. By the way
Welcome to the world of airliners. I have NEVER been a GA flyer. It has never interested me. My first ever aircraft I learned like the back of my hand was the PMDG 737-800 on FSX and I've been hooked on heavy iron ever since. As I continue to learn X-Plane you are going to start seeing me flying the 747, 767, 737 and A330 as well as the MD-83 Pro. I haven't picked up the SSG 170 but I can already tell its a better aircraft because more of the systems are simulated and it uses the newer cockpit layout. It looks like all the nobs in the over head actually work and I think they even simulated the 3 and half minute boot up testing cycle. I'm going to pick it up this Friday and start learning it. If it ends up being better I'll probably switch to it for all my E170 needs and continue to use the X-Craft for E195 flights.
Great vid! I was following along with my E175. What are you using for the ATC sim?
Great tutorial! I have a question, do you always have to put in your arrival information? Is it fine to just add airport destination and not star and runway. I fly on VATSIM alot and alot of times they change config based on weather.
\
I just bought this aircraft today great timing!
have fun with her!
Wipers - you want the switches off because if they're on, when you power up, the wipre dry windows and bugger up the coating on the glass!
Thanks, this is one funky bird....Good luck flying this in VR.
She does have her quirks for sure! I am going to try SSG's E170 as it looks far more complete!
Great tutorial thanks for teaching me!
What is the plugin you're using for the ATC ?
you just won a subscribed just with your intro haha loved it
Hey awesome vid again and I like the honest critic... I bought this aircraft and never really used it....but seeing you'll working on giving it a little mod..looking forward... I think all payware aircraft should eventually be study aircrafts
Yeah they should! Actually, after I started poking around under the hood I was contacted by one of the devs and another person to collab with them on making a fully blown FMOD Sound pack the E175/E195, similiar to BSS's back for the A320. We're already done a lot of work and it already is starting to sound like a real E175/E195 now.
Excelent video! What's that ATC plugin?
Thank you so much for this fantastic tutorial :)
You are welcome. :)
Over 310 knots the plane can't stay at cruising altitude, NAV mode orange, following route: no chance. What should I do?
Why did you have to activate de "Flight Level Change" just after take-off, it shouldn't climb according to FMC programming?
Hello, I love the erj175 but a long time a ago I got a fault message, when loading the plane ✈️, there’s talking about Visual C++ I downloaded visual c++ and it not works, the same message came?! Do you have a link for a correct version of c++?
Hey, thanks for this video. I'm walking through my cold and dark, and following along. Just bought this version thing with the latest 2.2 version. Question, i notice you get the seatbelt/no smoking ding when you flip those switches. I don't have those sounds (no audio sound at all) when i move those switches. I see this video was recorded before 2.2, and probably before they switched to fmod? Wondering if you upgraded to 2.2 and also do not have those sounds anymore? I looked at the guids file in their fmod directory and don't see anything specifically mapped to those switches. Anyway, just curious. Thanks!
I am Beta testing 2.3 right now... mmmmmm.... you know I didn't notice the sound being removed. I'll take a listen again and ask where it went if its still gone in 2.3
Hi from TEL Aviv, awesome video to learn form witch make me ask what is the second half part for this tutorial to just finish the nice tutorial. one more question what kind of ATC did u use in that flight?
Thanks and keep going on your youtube channel Dylen
I cant see my actual fpl on the map display
what's your robot atc add on?? i loved it! where i can i install it (or purchase it) ??
My primary flight display was fine before Mdcu, now it’s greyed out with no readings, anyone know why?
NAV lights should go on when the aircraft has power and the red beacon goes on when the aircraft is about to go live, aka engine start or push to alert all ground crew around that the aircraft is live and to keep clear
can i fly on autopilot without FMS set? like in boeing 737-800
what is the voice-controlled ATC voice plug-in?
idk what u did that i didnt but the plane's autopilot just never wanted to work for me. It decided to go backwards on the route for some reason. and it went space shuttle status for some reason
Hello K-man,
can you tell me wich ACT package are you using during this tutotrial ?
It really helped me to learn the embraer 175.
Looking forward to your reply.
Kind regards, Ronald Schuuring. The Netherlands.
When I try to select the runway it says "no runways found". Any clue?
What's that ATC plugin?
How do u do 190 pushback on menu or is it not available yet
Can you steer on ground with yoke?
how can I se the top of climb and the top of descent?
What ground services do you use for this plane ?
What is you sensitivety settings and respons curv
I wanted to see your instrument approach and landing :)
great explenation
hi what is plugin for speak with atc??
cap. i have a question, how do u talk to ATC? do u use any program or something please explain. thx
Vatsim
hi where have you the sounds from the fmc
Cool stuff, which SIM interface with ATC is that?
What addon is that talking to the atc
Hello I just want to know that how to identify other waypoints likes fix, airp, etc???
Normally airports have a 4 symbol identification, for example, Miami Intl is KMIA, Buenos Aires Ezeiza Intl is SAEZ, Dubai Intl is OMDB. That’s an ICAO for airport identification. Airways are rare for me tho, you can have an airway called J525, or VR1225 or IR211. I think airways are classified in many ways that it exhausting to learn them. And normal waypoints/fixes are named by 5 symbols together, like VANAR, KARVR, HEDLY, etc.
Fun fact I know from a friend is, somewhere near Washington, when you are approaching the airport, fixes are named “WEEEE” “WLLLL” “NEVVR” “FORGT” “SEPII”
what atc plugin do you use?
8:40
In real life the aircraft will not do any self test unless you have full power to the aircraft (APU or GPU). One of the first test that it does is a flight control test. The only thing you need to do while that test commences is to *NOT TOUCH THE FLIGHT CONTROLLERS* that takes only about 2-4 minutes. The IRS alignment takes about 6-10 minutes (depending on aircraft location).
11:12
You are wrong in this part the APU will NOT move to 5-10 percent just by setting it to on (It only moves when you start it).
Just FYI.
Hey, maybe you know whats up with my E175. I try to submit any waypoint in the MDCU and it says "Navid not found" I also, when I get to the Perf 2 page, I try to put in my cruise airspeed and it simply does not let me. It doesn't say anything it just wont let me, something is going on.
Are you using any kind of Navigraph/NavDataPRO subscription? Is your AIRAC up to date? Does it show the latest AIRAC in the status page on the FMC? Are you choosing the right type of waypoint when inputting it (VOR/Fix/NDB)? The speed one I am not sure of. It should let you put something in there. 280 or .74 is a good starting value.
I got the speed issue fixed, but where does it say in the status page the airac information? I don't see any airac info in the status page.
I bought the xcrafts-175-v2 Embraer E-175 v2.4, I think is very good but this has a big problem, after a minutes of flying when you are climbing, the cabin turns black, you can hear the sounds but the vison of the cabin turn slowly black and you can´t see nothing! If you change to the another view, for example spot view you can see the plane, return with key W, and you can see the cabin again, but in a few seconds after turns black again. Can you help me how to fix this problem? Thanks in advance.
You are passing out from Hypoxia, a lack of oxygen to your brain. You are experiencing this because you didn't fully program your FMC. The aircraft needs to know what your Initial Cruise and final Cruise altitudes are in the PERF page so it can set the PAX Pressurization system to the proper altitude. If you fail to set this the aircraft thinks it is on the ground and won't bother equalizing the pressure in the aircraft so eventually you and all your of virtual passengers will pass out and die from lack of oxygen.
Captain K-Man it is a joke? Ok I will...thanks capi
In this tutotrial I can learn how to program the entire FMC including the initial Cruise and final Cruise altitudes?
Hello! Thanks for the great lesson! What is that ATC talking to you and give the clearance delevery?
Pilot2ATC. It is the best payware ATC software you can get for X-Plane.
Thanks! I'm new at X-Plane, i've started 2 days ago in this simulator. Do you know if is in X-Plane something like FS2Crew Copilot (P3D/FSX)?
MultiCrew Experience (MCE) I believe works with X-plane. It is the ONLY virtual co-pilot package that I know of that will do checklist readbacks.
You are the best!! Thank you very much again!!!
What is the atc plugin that you use to talk to atc? Is it a setting in Xplane stock atc
It is Pilot2ATC, a payware full feature voice recognized ATC suite that works on FSX/P3D and X-Plane 11. Free 10 day trial at their website. The voices are various voice packs i have purchased.
@@CaptainKManaw man, i wish it were xplane stock, that would be awesome! thx though
It says "route not loaded" in the MCDU...(just kidding I needed one more waypoint.)
What are your computer specs to run your system?
what type of ground services you are using and how did you set up ground power
Well the X-Craft comes with its own ground power system and ground equipment. It's in the side panel menu when you move the mouse to the left side of the screen. I also use JARDesign Ground Handling Deluxe and BetterPusbBack as well.
thanks i found it i'm new to Xplane 11 i bought a bunch of planes and this one is different again thank you
How do you get gnd handling working with the e195? I downloaded the set but still cant get it to work
I didn't do anything special. I just installed the .set pack off of JARDesign's website and wallah.
Im running the new e195 v2.3, dont know if that matters. Also theres 2 versions of the set does it matter which one you use? And did you put it in custom or default folder? Cheers
I haven't installed the 2.3 yet. It should be the Custom folder. Probably just two different authors having different ideas about what should go around an E195.
Hi there so was wondering does this tutorial also work for the Xcrafts E175. Does the E175 start up the same way?
Yes. They are identical aircraft, just one is a stretch limo and the other s sub-compact. :)
What did you use for ATC?
I'm type rated in the 170 through 195 series EJets. I fly the E 175 though for a regional. You did a great job going through the system power ups. I saw a few errors, but for sim purposes you seem to know your stuff. Have you considered getting some flight hours and working for the airlines? I started out in the sim community and worked my way up in about 4 years.
45thpaace Seam is seem in english
Thanks Rick.
Thank you for the help. One last question. How do I rotate my entire canvas in WED so I can properly align objects? I'm tired of tilting my head lol.
hahaha. Well you can't really rotate the entire map or if you can I haven't discovered how. You are always stuck in a NORTH is up view.
I am about to give up on this project. I was about 90% done with this airport, I had to make some taxi lines adjustments and all of a sudden my lines come out way off on XP-11 when in WED they appear perfectly lined up (I check all my lines with max zoom). Prior to this, I had no issued with any taxi lines. I don't know what happened but I am frustrated. Please help if possible, thank you.
Is this an airport you are converting from FSX/P3D or one you are updating from the Gateway? Taxilines generally should be where you put them in WED unless this is a very large ariport then they might be off. Are you using an Ortho satellite map to help you align everything? Have you delete your previous DSF file and rebuilt the entire scenery package by using the EXPORT SCENERY PACKAGE function? Remember to remove the previous DSF file that was created before doing this.
It is a XP-11 stock airport that I'm upgrading and customizing. I had been working on this airport for a week with no issues. i guarantee you I inadvertently hit a key that has caused this issue. I even move a taxi line to one side of the center line and it will show up on the opposite side in the simulator. In Overlay editor, If I load the airport and pan around the lines (all the lines I'm having issues with are curved intersection taxi lines) the view point will actually shift the line from one side of the center line to the other. It's crazy weird.
Okay so, I found a remedy but I was trying to reduce the number of nodes, and this remedy just adds more. I noticed that the start of the lines were fine but the ends were off, so what I did was create a node on the main center taxi line to snap the curve line to and that fixed the problem. I guess snapping line nodes is mandatory? I made some that came out fine with no node to node ends before but oh well at least I can continue my project; I hope it get approved for upload.
Capain K-Man what is your atc system?
Pilot2ATC - Best payware ATC available on any sim platform.
When I click NAV Mode it turns yellow not green, someone please help me out.
Is your navigation source FMS? When a button turns yellow it means it is armed but not active. The Nav button is the LNAV button of large aircraft. You need to be near or on the magenta navigation path and your navigation source needs to be FMS.
@@CaptainKMan Thank you for helping me out! Much Appreciated!
Why are you not use vatsim?
Captain K-Man What is your all time favorite XP11 aircraft?
IXEG 737-300 without question. Most complete. Most systems simulation. Great sound out of the box. Fully functioning FMC system. Handles like a dream. Great 3D model and VC.
Captain K-Man Thanks, replied so fast Sub
Well I have RUclips messaging monitored when I am at my workstation working on airport scenery for X-plane so I got notified the second someone talks to me on RUclips, Avsim or X-Plane.org. I try to answer all questions when I can.
What ground equipment are you using?
Catering, Fuel and loading are by JARDesign's from their payware Jardesign Ground Handling plugin and the pushback is from BetterPushback freeware plugin.
my fd will not come on light flikers when i pusf fd but will not stay on
Is your FMC fully programmed? Did you choose a navigation mode on the AP Panel (FMS/Headings Select/etc)? The flight director won't turn on if the data it needs is incomplete.
yes ive been on this plane 8 hours solid but i watch many on you tube and you all do it different which is so confuseing when learning to fly this plane i still not sure of it and its not easy to fly i have yet to land it ...
Nice
The only thing I don't like is the sids and stars always deleting themselves
Really? I haven't had that happen to me. My struggle is with the autopilot not trying to kill me when I first turn it on. XD
Captain K-Man hahaha. Yeah
I'm streaming a flight if you wanna have a look. Thx
which atc add on are you using?
When I fly offline I am always using Pilot2ATC. Google it. 10 day free trial is included in the demo, uncrippled. My voice packs are from Cereproc Voices.
@@CaptainKMan but the atc voices sounded very electronic..... I thought it's x life.. Are you sure in this video you have pilot2atc?
Can you share the sounds with us?
Wait a little while longer. I and a few of the developers have gotten together to produce a full FMOD upgrade for the aircraft. Its going to add a whole new dimension to the aircraft I think.
What ATC are you using sir?
Pilot2ATC
Please make a download of your sounds, they're awesome!
I might just do that. I am trying to learn a few more things about this plane and where it gets its sounds from. I already created some extra sound that are missing such as the chime that goes off anytime the Yellow Caution light goes on but I can't see to find out how to attach that sound to the logic that triggers the caution light. Even setting the sound in the plane maker has failed to yield the sound. The plane out of the box is definitely sound deficient and relies to much on default sound assets from X-Plane.
Okay, thanks for the info. X-Crafts does need to develop better sounds or get some help from BlueSkyStar. I just bought the plane. One more thing, is the plane hard on frames? My computer is a little bit slower than most.
I agree, we need your sounds, they look far better than the stock sounds
Yeah, the stock sounds are pretty.... not..... good. Now keep in mind some of the sounds are coming off of XPrealisticPRO. The thumps and bumps when taxiing, the wind rush and the flap lever clicking sounds are all XPRealisticPRO which I *HIGHLY* recommend for X-Plane. Its an awesome program. The sounds I fixed are the Alarm Fire Test Bell, The Avionics spool up and airconditioning bay hummmmm and I tweaked the engine start up sounds to be louder. I also created the CAUTION sound but can't seem to get it to play when the yellow light comes on, even with assigning my sound to failures in the aircrafts ACF file in Planemaker! Let me do some more sound work and I'll probably release the pack on X-Plane.org. I want to add a whole new engine start up sound and record the REAL E-195 external engine sounds.
You should take the XPR sounds and just put them in the aircraft as their default sounds.
1:01:01 the speed BRRRRRRAKES
We have culture here on our channel! :D
how did you get the GPU to be available?
The Pop out menu on the left. Select ground equipment menu and attach the GPU.
thanks for the quick reply, the popup menu on the left? I only have Radio and FMS there?
When you move your mouse to the extreme left of your screen, a little menu should slide out. This is the same menu you use to hook up the push-back tug supplied with the aircraft. You will find the GPU connector in that menu.
my problem was the X Plane 11 window not being on the main monitor. When I switch it to my monitor it popped up like you said. Thanks for the help!
5.000 Vertical Speed?? Are u srsly?? 1:04:25
Are you using jarground handling?
Yes. I do use it in my fully loaded flight videos.
Captain K-Man did you have to make a custom airplane set for the e195 or did it just work?
A custom was already made by the community. Just snag it off the Org. I can't remember if there was a default one for the e195 but I do know there is one created by the community.
Captain K-Man, you definitely need to work on your ''Canadian City Names pronunciation'' ! We say {Regina like in Carolina} and despite ''Sault'' is written this way, we pronounce it Sue Ste-Marie not Sault Ste-Marie ! Knowing the above is one step ahead to become a true Canadian :P
I like Canadian Bacon. Does that count?
Same as E175?
Yep. Identical cockpits.
Why does everyone say the ssg embraer are better I have the ssg ones and these look much better hardly anything simulated on ssg ones
I have never seen this plane in Germany
you should use vatsim instead of a computer
What atc did you use?
pilot2atc.com/
Captain K-Man merci. Which embraer is good ssg or xcraft?
Both but I lean towards the SSG because the autopilot system behaves more like a real plane and the systems simulation is slightly better. However, X-Craft 2.3 is good too because of the FMOD Soundpack and I like the fact that the cockpit in Cold and Dark is much more interactive. Almost ALL The switches are already in the on position in the SSG which is typical of the real world BUT I like flipping switches and turning knobs which X-Craft does. In the end though.. the SSG wins. Both aircraft are good frame rates but X-Craft is slightly better because their FMC system isn't as CPU intense as SSG's.
ruclips.net/video/bMgXdOuVzYc/видео.html
Captain K-Man i heard ssg’s modeling is not as good as xcraft but system wise its good
Trim man haha
Not so much a tutorial as a 'How I stumble through getting the Embraer in to the air.'
47:39
Too much ''rocket'' Take Off :D
Phonetic alphabet for i is India 😊
Fmc seems overly complicated and unrealistic based on real life videos and my Wilco E-jets. Everything else seems like nice add on.
29:43
1:35 air lingus B747 😂😂😂
the Red bacon being swiched on when APU is swiched on is wrong totally wrong because it is not even ready for pushback the red bacon tells the ground crews to stay clear clrearly it is not ready to finish loding so that is the wrong information. idk how you do things in the US or Canada but thats not how sop's work here
It’s not a hard plane to fly at all