How to Install a Bare Projector Lamp into your Projector

Поделиться
HTML-код
  • Опубликовано: 26 окт 2024
  • A step by step installation video on how to install a bare projector lamp into your projector. Call MyProjectorLamps at 1-888-785-2677.

Комментарии • 40

  • @xaphon89
    @xaphon89 6 лет назад +3

    This looks even easier than I expected. I thought I would at least have to remove some solder joints and resolder the new terminals. I don't get why so many people insist that you must spend an extra $100+ on the lamp+housing (other than that's what the manufacturers would prefer you to do).
    Obviously you should wear gloves.

    • @rkan2
      @rkan2 5 лет назад

      Depending on the manufacturer, the wires could be soldered. At least Panasonic projectors are or were (not making consumer projectors anymore) like this

  • @Jerrel.A
    @Jerrel.A 2 года назад +1

    After the lamp replacement, I forgot to reset the counter. And now the bulb is not lightening up when the projector is turned on. This is because of the projector is acting on the lamp hours counter since the warning came to replace the lamp. Is there another way to reset the counter?

  • @vinayakprasad7009
    @vinayakprasad7009 2 года назад

    excellent sir

  • @ohnoitsthatguy09
    @ohnoitsthatguy09 9 лет назад +17

    something this video left out.... wear latex gloves when handling any glass on the lamp, the oils from your fingers will shorten the life of the lamp.

    • @wattzefeuke
      @wattzefeuke 8 лет назад +4

      +Rob Calton I feel like saying "intentionally left out", but that wouldn't be nice.

  • @DRONEPIMENTA
    @DRONEPIMENTA 3 года назад

    I bought a new lamp for my Epson EX7235 model datashow and it won't turn on. How do I test this type of multimeter lamp or power supply to make sure it looks good?

  • @elderandremarborrayo7347
    @elderandremarborrayo7347 Год назад

    Instalar es facil ;/ comprar la Lampara es lo dificil porque son muy caras ,valen mas que el aparato en si..

  • @teolong9
    @teolong9 5 лет назад +2

    when you go to their website they only want to sell you the entire lamp + housing , no option for bare lamp. My projector is an epson 5030ub

  • @Kammaflaje
    @Kammaflaje 11 лет назад

    Is it that easy on a benq w1070 lamp aswell. And as long as dont finger on the front of the lamp its all fine right? Some store told me that fingering on the lamp was realy bad and that thy say its best to buy everything to not compromise the lamp. Ty for help.

  • @niel5897
    @niel5897 3 года назад

    Sir, how do I fix the lumen on a jvc projector, I've replaced a new lamp but it's still below 2 lumens?

  • @joyce6538
    @joyce6538 9 лет назад

    I am changing a JVC Projector lamp. But the screws a striped how do I get the screws out?

  • @Hisar610
    @Hisar610 5 лет назад

    When we remove the lamp from projector, can a dust problem happen?

  • @jackieking2621
    @jackieking2621 7 лет назад

    Please do a video on a optoma 142x thanks

  • @dumbcat
    @dumbcat 4 года назад

    can you make your video brighter? i can barely see it. not sure what is wrong

  • @ababner317
    @ababner317 10 лет назад

    Will these lamps work on a SMART notebook proector burned out lamp?
    What are their cost?

  • @rickybray2894
    @rickybray2894 6 лет назад

    I need a replacement lamp bulb for a Bernelli H D 6 K
    L C D projector. Can't find one online. Help

    • @bridgendesar
      @bridgendesar 5 лет назад

      See if it is badged under a different name, or look at the part number on the bulb itself

  • @johanrivas3255
    @johanrivas3255 8 лет назад

    good night, by the knowledge that is they possess, would consult the following: I own a lamp overhead projector 500W , I would like to know if it can work smoothly in a video beam acer ( obviating the electrical procedure to turn on ), the beamer It has a 230w lamp . the projector can work without problems so powerful light ?? Thank you

    • @FixitFrank
      @FixitFrank 7 лет назад

      unfortunately they are different kinds of lamps. They will not work with each other. The beamer uses a mercury vapor arc lamp.

  • @pradeepkumararyan
    @pradeepkumararyan 7 лет назад +1

    Are this lamps AC or DC

    • @i.c.a.productionsbyr.p.
      @i.c.a.productionsbyr.p. 4 года назад

      I'm not sure, but this lamp is a xenon bulb, same of photographyc flash, with positive and negative polarities.

  • @vcreations20
    @vcreations20 5 лет назад

    I want a lamp BenQ projector

  • @MyGHMASTER
    @MyGHMASTER 10 лет назад

    what is the price for the Infocus lp120 bare projector lamp?

    • @aprilai2442
      @aprilai2442 8 лет назад

      Still need Infocus lp120 bare lamp now? if yes , contact me , Email: lamptarget@uhp.cn Whatsapp: +8613434337685 Skype: ellin-yin

  • @tamerursavas3828
    @tamerursavas3828 6 лет назад

    What if you replace the lamp by a 100watt smd led

  • @russellsnyder
    @russellsnyder 11 лет назад +4

    Every projector is different, but the steps are always the same. BenQ projectors are known for having easy installation.
    It is best not to touch the glass surface of the lamp, to avoid getting grease, oil, and dust on the lamp.

    • @WalkersLawn
      @WalkersLawn Год назад

      Hey Russ, I see that you've been at this a long time now and are still giving great service in 2023. Thanks for your help with my Epson 5050ub bulb challenge. Everything is up and working perfectly.

  • @dumbcat
    @dumbcat 4 года назад

    do you have to do those motions with your hands too?

  • @jasonboche
    @jasonboche 8 лет назад

    I have a notification that my lamp usage is > 5500 hours. I've had replacement bulb assembly for over a year from BenQ. Should I replace it now or wait until it burns out?

    • @aprilai2442
      @aprilai2442 8 лет назад

      Replacing bulb until it burns out or when the brightness is lower, Trust me , I am in this domain for years...

  • @jonesent76
    @jonesent76 7 лет назад

    how to know what type you have

    • @russellsnyder
      @russellsnyder 7 лет назад

      The projector model number can be found on the projector itself, or on the operators manual.

  • @lakhinderpresadkushwaha6858
    @lakhinderpresadkushwaha6858 3 года назад

    Lep af

  • @ZeroMass
    @ZeroMass 10 лет назад

    LOL 300$ for a lamp from their site... yup, HUGE savings : / Folks, go buy a new laser hybrid rated 15-20,000 hrs and get rid of that old lamp driven garbage projector! You can even do a DIY convert to LED, dont waste money on obsolete junk.

  • @Macatho
    @Macatho 8 лет назад +1

    They're around 30 bucks on aliexpress or amazon. Don't buy overpriced lamps.

    • @Macatho
      @Macatho 8 лет назад

      PhoenixAsh I think we're thinking of different bulbs. What you need to do is multiply the price by 3, then you get the price in your country. For example a €30 bulb in chine would cost €90 here in Sweden. Import, VAT, profit margins etc...