Did like the instruction told me. Test printed, and perfect. Used a dry micro-clot to wipe of the roll you must not tutch. There was a lot of powder in them. The iron tool works great.
I'd like to order the the North American holemaking tool, but does it come with a plug so I can plug up my MFP m277 dw Hewlett Packard cartridge after I make the hole? I didn't see those plugs for sale on your website.
The hole needs to be sealed with aluminum duct tape for it to be truly airtight. This tape should be provided with the toner kit, but if ever you need, you can always order some from us along with the tool.
i would say be careful to get all the old toner out (use an airline to blow it out), the mixing of two toner types (brands) can cause printing problems. also a simple refill may not be enough to get high quality prints as the PCR may need cleaning as well as the corona wire (if the cartridge uses one), the developer roller may also be clogged with old toner but this often doesn't make too much difference. The OPC drum may have scratches caused by doctor and recovery blades and may need to be replaced. If your cartridge shows signs of leaking toner then the recovery blade may need to be replaced. Like the hole tool a lot, a large wattage soldering iron with the tip replaced by a suitably sized piece of steel tubing makes a good substitute. The cartridges can be drilled if you go carefully ( not to damage any agitator system that may be in the toner chamber) but an airline is needed to blow the chamber out in case plastic has fallen inside.
It's always better to empty the toner hopper and fill it with new toner. Don't mix the old and the new toner. And it's not necessary to burn out a hole in the plastic. It's better to access the hopper thru the developer roller.
Even though the high-yield 201X cartridge normally carries more toner than the 201A, due to the cramped design of the cartridge with the toner sac, we don't recommend filling it with more than 1 bottle at a time. The bottles we provide contain 35g of black and 30g of color, enough for 1500 pages of black or 1400 pages of color at 5% page yield.
Dios no entiendo ingles pero lo que me ayudo es lo que escribiste asi pude traducir gracias con eso todo salio bien muchas pero que seria bueno que tambien ai ga tororiales en español
See page 101 of the printer manual for details: h10032.www1.hp.com/ctg/Manual/c04474163 If you continue to have difficulty, feel free to contact our tech support at support@inkowl.com
All the toners we offer are formulated specifically to function inside each printer. We closely control the particle size, chemical composition, and melting temperature to ensure compatibility.
This is a toner holemaking tool, available here: www.inkowl.com/laser/laser-refill-tools/hole-in-one-toner-cartridge-hole-making-tool-120v-for-north-america/P241/ You can probably find something similar from a Brazilian toner supplier as well.
We ship to Brazil, on request. The customer will be responsible for any customs duties and taxes. Please also confirm the voltage of your area, and make sure you have the correct USA power adapter for the tool, as needed.
Jeisa Gurgel comprei o kit deles. Parece um ferro de soldar modificado. O toner deles é ótimo. Fiz uma compra pra testar. Vai mandar sem recibo, como se fosse presente. Vamos ver se vai ser taxado. Fiz o pagamento pelo paypal
The part number is THP-M252-CMYK, our price is $39.95 for the 4-color kit. It's enough toner to fill each cartridge once. We don't sell in larger volumes.
Yes, we do. International shipping is by US Post. The service is quite affordable, but the transit time depending on your country can be quite long (2-8 weeks). We cannot be responsible for any customs delays or local duties or taxes.
Did like the instruction told me. Test printed, and perfect. Used a dry micro-clot to wipe of the roll you must not tutch. There was a lot of powder in them. The iron tool works great.
can we make the hole at the edge not in the midle for easier pouring out the waste toner?
thanks a lot. The tutorial was very helpful and could successfully refill the cartridge... thanks
Just ordered my set of 4 cartridges and the burn tool for EU, for around 600 NOK inkl. shipping
I'd like to order the the North American holemaking tool, but does it come with a plug so I can plug up my MFP m277 dw Hewlett Packard cartridge after I make the hole? I didn't see those plugs for sale on your website.
The hole needs to be sealed with aluminum duct tape for it to be truly airtight. This tape should be provided with the toner kit, but if ever you need, you can always order some from us along with the tool.
i would say be careful to get all the old toner out (use an airline to blow it out), the mixing of two toner types (brands) can cause printing problems. also a simple refill may not be enough to get high quality prints as the PCR may need cleaning as well as the corona wire (if the cartridge uses one), the developer roller may also be clogged with old toner but this often doesn't make too much difference. The OPC drum may have scratches caused by doctor and recovery blades and may need to be replaced. If your cartridge shows signs of leaking toner then the recovery blade may need to be replaced.
Like the hole tool a lot, a large wattage soldering iron with the tip replaced by a suitably sized piece of steel tubing makes a good substitute. The cartridges can be drilled if you go carefully ( not to damage any agitator system that may be in the toner chamber) but an airline is needed to blow the chamber out in case plastic has fallen inside.
Where can I buy this tool?
You can order at www.inkowl.com
It's always better to empty the toner hopper and fill it with new toner. Don't mix the old and the new toner. And it's not necessary to burn out a hole in the plastic. It's better to access the hopper thru the developer roller.
What is/ how do you access the developer roller? I looked on your you tube for HP 252dw instructions and I dont see any info thanks
Wow! Excelent tutorial
Do I need order 2 bottles of refill powder for cartridge type 201x?
How much recommended refill capacity for each type of cartridges?
Even though the high-yield 201X cartridge normally carries more toner than the 201A, due to the cramped design of the cartridge with the toner sac, we don't recommend filling it with more than 1 bottle at a time. The bottles we provide contain 35g of black and 30g of color, enough for 1500 pages of black or 1400 pages of color at 5% page yield.
Dios no entiendo ingles pero lo que me ayudo es lo que escribiste asi pude traducir gracias con eso todo salio bien muchas pero que seria bueno que tambien ai ga tororiales en español
i cant find any of the cf400 series cart on your website...
The products for this printer series can be found here: www.inkowl.com/?p=search&q=hp%20m252
There isn't a Continue setting in my Supply Settings on the M277dw, only percentages.
See page 101 of the printer manual for details: h10032.www1.hp.com/ctg/Manual/c04474163
If you continue to have difficulty, feel free to contact our tech support at support@inkowl.com
Thank's a lot!
isnt these inks harm the printer?
All the toners we offer are formulated specifically to function inside each printer. We closely control the particle size, chemical composition, and melting temperature to ensure compatibility.
hi man, good job !
i'm from Brazil.. Can you tell me what the name of this tool is?
thanks
This is a toner holemaking tool, available here: www.inkowl.com/laser/laser-refill-tools/hole-in-one-toner-cartridge-hole-making-tool-120v-for-north-america/P241/
You can probably find something similar from a Brazilian toner supplier as well.
In Brazil we have a problem. There is no good supplier. The methods used here are not good at all.
Is there any chance your business ship products to another country?
We ship to Brazil, on request. The customer will be responsible for any customs duties and taxes. Please also confirm the voltage of your area, and make sure you have the correct USA power adapter for the tool, as needed.
Jeisa Gurgel comprei o kit deles. Parece um ferro de soldar modificado. O toner deles é ótimo. Fiz uma compra pra testar. Vai mandar sem recibo, como se fosse presente. Vamos ver se vai ser taxado. Fiz o pagamento pelo paypal
Do you sell in bulk toner volume for HP LaserJet Pro MFP M277c6?
Part number & price for 4 colors?
The part number is THP-M252-CMYK, our price is $39.95 for the 4-color kit. It's enough toner to fill each cartridge once. We don't sell in larger volumes.
You got a customer.
Chips not needed, are settings required to printer?
Thank you.
That's right. Chips are not needed. See the video at 2:26 where we show you how to set the printer to ignore the toner levels.
Do you ship Internationally?
Yes, we do. International shipping is by US Post. The service is quite affordable, but the transit time depending on your country can be quite long (2-8 weeks). We cannot be responsible for any customs delays or local duties or taxes.
hello, where can i buy the 4 color (CMYK) inkowl toner refill? im from the philippines. thanks
All our products are available at www.inkowl.com/
Muy bueno
super
but what about the chip how do we reset ?
See 2:14 in the video. You don't need to reset or replace the chip, just bypass it using the instructions shown.
using this method the toner supports on average how many fillers?
After refilling my black cartridge with the correct Owl product, my black is printing very light. Any suggestions?
How light are we talking? The best advice would be to contact our tech support directly at info@inkowl.com
I live in Brazil, I would like to know if you have the cartridges for sale and send via post and what values
CEP 65704000
Those aluminum tape are junk, no matter how much tape I use It leak out, rubber plug needed.