[How to] Install SE-226-XT ARGB onto Intel LGA1700
HTML-код
- Опубликовано: 8 сен 2024
- This short video shows how to install ID-COOLING SE-226-XT ARGB on Intel LGA1700 platform. If you have SE-226-XT BLACK, you can also follow this video, but skip the ARGB connection part.
A few things, 1.What took so long? 2. On the unit I received, the middle hole in the bracket was no where as precisely machined out as the one in the video. I had to hold the bracket in place to keep it in the LGA 1700 slot. 3. Missed a step with the back plate part, according to the manual for LGA1700, you need to move the stands to the farthest position.
Thank you so much for mentioning these. Well the backplate, I think no needs to tell that movement as the LGA1700 motherboard holes shall limit the backplate position.
Great. My fan is missing those clips.
Спасибо. Чётко и по делу!
БОЛЬШОЕ СПАСИБО АВТОРУ.ЭТО ЕДИНСТВЕННОЕ ВИДЕО ГДЕ ПОДРОБНО ПОКАЗАНО ПОДКЛЮЧЕНИЕ.ВОТ Я , НАПРИМЕР,ВПЕРВЫЕ ПРИОБРЁЛ КУЛЕР С ДВУМЯ ПРОВОДАМИ.ПОДКЛЮЧИЛ СРАЗУ ДВА В ПОДХОДЯЩИЕ КОННЕКТОРЫ,А ПОТОМ ДУМАЮ,А ВДРУГ Я НЕПРАВИЛЬНО СДЕЛАЛ,А ВДРУГ ТОЛЬКО ОДИН НАДО БЫЛО ПОДКЛЮЧАТЬ,А ВДРУГ ПЕРЕГОРИТ?
Жиза. Тоже только приобрёл и начал искать обзор подходящий.
Думал взять эту башню, так к ней ещё и отвёртку подходящую найти надо(
@@Menlow1988 У меня тоже не было длинной отвертки. Я и так справился. Сбоку обычной прикрутил и всё.
@@Menlow1988 в комплекте идёт подходящая
@@RSkvor в комплекте нет никакой отвёртки
what type of screwdriver do I need for the inner fan bolt? I can't reach it, and with what I can reach it's the wrong head :(
I cant remove the heatsink. Those two screws are already unscrewed but why cant i remove it from the bracket? 😑
Is this cooler compatible with LGA1200? I plan on using it with an I5 11400f
yes, sure.
Hello! Are there any compatibility issues on the MSI MPG Z690 Carbon Wi-Fi?
The site could not find an answer
НОРМАЛЬНО ВСЁ.У МЕНЯ ПОДОШЛО.
How many mm long screw driver i should use for installing this cooler?
Height of screen driver? Please reply
I want to install this on my 12700F just no idea where to buy
where are you from?
hello, this cooler works for your 12700f? i think do the same.
where is a result???
How to control lighting of this device?
Bạn phải gắn dây RGB vào pin RGB của motherboard rồi dùng phần mềm của board để chỉnh màu. Tùy board mà bạn mua, như MSI thì dùng mystic light synce. Hope it helps
Hello~ ID-Cooling ❤❤❤❤
at 1:56 and 2:05
Look feel so a little bit difficult when connect ARGB cable
Connect cable controller Sata header to the Sata power from PSU. I like version ARGB ..But steps to connect is hard. maybe i will get version no ARGB T....T🥺🥺
Which is better, the 226 xt or 225 xt?
Is it posible to remove those heat pipe caps and top cover?
Yes,it can.
can i buy extra fan to make it dual?
you can, but please make sure you have room from the rear side of the case
the 2nd fan clip set is included in the box
thanks!
Will that kit work with Se-224xt?
yes, SE-226-XT SE-224-XT have same mountng mechanism
@@IDCOOLING where i can buy kit for LGA 1700 ??. I bought SE 224XT - Argb v2 about one years. It's just support LGA 115x and AMD..
Hello is CPU ID-Cooling SE-226-XT ARGB enough for Intel i5 12600KF i'm not planning to overclock just to remove power limits.
enough!
@@IDCOOLING Thank you!
How to buy in Thailand ? , Dealer in thailand is very slow import it. 🤤
will check with sales channel soon to solve availability in Thailand
HELLO, IS IT COMPATIBLE WITH SE-214-RGB FOR LGA 1700?
SE-214-RGB? the very old model?
is the black plate made of metal?
you mean the top cover? It's plastic with brushed effect.
@@IDCOOLING the back plate
does this cool the 13600k properly?
yes, it will do!
Vamooooo