Since many had some more doubts regarding this clay, I have made another video answering various of the doubts in detail. So do check out by hitting this link ruclips.net/video/Xs9WJ3R1COc/видео.html And thanks a lot everyone for the response on this video✌😇
Thanks a lot for this video. I used to use water on other air drying clay, but since Mouldit comes with instructions to use powder, i used that but never got the finish i was after. Thanks again. Also the painting tip is awesome. I've experimented mixing in colour with the clay while soft. The colour stays true. But your method saves paint.
@@xyzabc-nu3vd of all I've used....mould it is the best.... The consistency is awesome. Very durable and finishing is also good. No cracks.....the idea to get a perfect finish is to rub it with powder when it's about 10-15 mins dry till you get a shiny surface.... Others I've used which i don't recommend are Mont Marte ( cracks), Scultp dry by Mungyo...is nice but dries too fast. Can't remember any others now.....I've been using fevicryl for over 4-5 years noe
I gues i didn't look up any video tutorial before I started with Mouldit. The problems that I faced were as below: 1. I mixed the epoxy and hardner very badly ( I took out full packet and mixed together). Since it was a lot, I guess the two colours gave a marbling effect which means they hadn't mixed together well..as I gather from your video. 2. I made sculptures and I use bowls to dry them when I work with air dry clay. I did the same and spoilt a ceramic bowl from my kitchen. 3. I definitely had wet the dough a lot so it hardened as per this video. 4. I hadn't washes my hands at every step so the remnants were on my hands even after wash. Also I use a marble piece for all my clay projects and it got spoilt quite a bit, alongwith my knife, etc. Good learning from this video though. Thanks.
Amazing creations. Would be great if the audio was proper as couldn't really make what you're saying anyways good work. I'm an artist, work with this clay often and tbh it's more efficient than the other costly options available in the market.
That was such an informative video!! I wish I had seen it before I ended up with a big ball of dried up clay, in the process of trying to store it. Can dried up clay be covered with wet clay to create something? As in will that bond? Let me knw if you have any idea bout it. Thanks
Thank you soo much!!!Just bought this set of clay and i wanted to know if the packets had to be sealed once opened cuz maybe it will harden but you saved me by saying that the resin and hardner doesn't harden unless mixed!!❤
is Mould It the same as Hobby ideas Shilpkar m seal ? Is the hobby ideas shilpkar m seal waterproof and fireproof ? Can we stick the m seal using glue/fevicol when making m seal art ? Thanks
Thanks a lot for the appreciation, Tried to mention as many tricks as possible to working on this clay. Please do check out my other Tutorial Videos about this clay as well. Have mentioned more tips in those✌️
Hi Shreyas!! Thank you so much for a very comprehensive video. I was able to handle it with ease after watching your video. I have a little question. This clay has a smell even after drying it for many days. Can you suggest a clay for creating small items that don't have any smell later.
Thanks a lot for your feedback. I have worked on few clays, they all had their own smell. So currently I don't know any non smelly clays. But the smells isn't that much according to me. I mainly use this one because of its high durability.
Wonderful tutorial like to banta he 👍🏻 But there is 1 thing I want to ask that after mixing the 2 things do we have to quickly give it the shape we want to if we cause delay will it dry and we won't be able to give it desired shape?
So today was the first time that I used mould it, and most of it was spoilt. I mixed the entire packet of 50g as I thought that 1) it will take longer to harden 2) was not sure that if I can store the opened packet in some box, and it will not solidify ( pls let me know how u store the product after opening the seal). So, was able to use only 10% and the rest 90% got hot, probably due to some chemical reaction, and became a stone. I used a steel plate, on the reverse side to role out the clay, and found that it was sticking ( next time I will use polyethene as u suggest )and I donno how do those youtubers do it, every time I was picking those earthworms ( it was my first attempt at making a lippan art), it would break. I didn't use any water, but I did wash my hand after mixing the clay Any tip would be welcome.
Well all these things have happened with us all during the first time. Its very common for this to happen for the first day, just keep practicing daily and try mixing small or required amounts of clay only. You can store the opened resin and hardner packets in a box or even in a open area, there's no issue with that. Please do check out my Various tutorials on this clay, I have tried to explain various doubts.
@@smmcreations Thank you for replying,😊 I'll try mixing colors in this clay, I find it easier to work with colored clay than coloring the finished product.
If I want to join two pieces, how can I smoothen it so it does not look like they are not two separate pieces? And do I need to use glue or it can stick to other piece?
Sir, I have a problem... once I mixed up the 2 components, I took a small amount of the clay and kept aside the rest mond... Soon it dried up and getting hardened enough.. Then I couldn't be able to take another bite of the mond... Sir, what to do?? How can I stored away from getting harder soon??? Please help 🙏
Take only required amount of the two components and then mix it, once you mix it, it will harden within 2 hrs and cannot become soft later. You can watch my amongus or Pikachu tutorial you'll get an idea
I had just used them and found out this one was convinient for me. And As I have been working on this one since 2 yrs, I made a video on it. But I'll see if I can make such a video
Great Content! I had a doubt - what if this clay is immersed underwater for aqua scaping designs? will it lose its hardening quality? or is it water proof?
Thanks for the detailed video. It was informative. I wanted to ask you, whether we can do a epoxy resin flood coat over this clay sculpture to have a glossy finish?
My mouldit clay was dry as it was old one probably one year back, but when I opened it, it was bit hard, I used some water but it was very watery so I added few drops of water it became watery like, I den got idea to pour in cone and use it, what do you think, it was correct plz correct me
hello my clay is not drying can you tell me why. i did it for the first time and mixed whole pack at ones (25/- pack) i did not use any water just mixed resin and hardner part, moulded and left whole night but no result😕
Thank you so much for this one Shreyas... But I am facing a different problem... The white part.... Not the hardener.... The white part stinks.. As that was hard...can yoh please help me with a suggestion.... It's difficult for me to work.. It stinks badly on my plan while kneading... Please suggest something
If the white part is hard then the clay is expired. You'll need to buy a new one. There's another video dedicated to that on my channel as well. Do check out
Kindly tell what varnish should I apply on coloured fevicryl clay mouldit pieces , earlier I was applying Asian paints clear synthetic varnish to make it fade proof but ever after months the products are sticky because of the varnish. Which varnish should I use then so that after 2-3days it wouldn't be stocky but glossy.
Wonderful tutorial! Thank you. I already subscribed. I just want to ask you that, if i.want to do an art work on the ply wood pieces or canvass board how to stick it ?
This clay is very sticky once its kneaded, So you can directly stick on the wood and work on it. Or the other efficient method is make your art separately and then stick it on the wood or canvas board using an instant adhesive like astral vetra, etc
Do use a glue as that will stick it permanently. You can check out my recent tutorial where I have explained this as well. ruclips.net/video/Xs9WJ3R1COc/видео.html
Since many had some more doubts regarding this clay, I have made another video answering various of the doubts in detail. So do check out by hitting this link ruclips.net/video/Xs9WJ3R1COc/видео.html
And thanks a lot everyone for the response on this video✌😇
Thanks for this video bro I was really searching exactly this information only
Thanks a lot for this video. I used to use water on other air drying clay, but since Mouldit comes with instructions to use powder, i used that but never got the finish i was after. Thanks again. Also the painting tip is awesome. I've experimented mixing in colour with the clay while soft. The colour stays true. But your method saves paint.
Thanks a lot for comment. ✌️✌️😇
Hey can u suggest any good air dry clays to me, exceot this onw
@@xyzabc-nu3vd of all I've used....mould it is the best.... The consistency is awesome. Very durable and finishing is also good. No cracks.....the idea to get a perfect finish is to rub it with powder when it's about 10-15 mins dry till you get a shiny surface.... Others I've used which i don't recommend are Mont Marte ( cracks), Scultp dry by Mungyo...is nice but dries too fast. Can't remember any others now.....I've been using fevicryl for over 4-5 years noe
Normal powder use kr skte h kyaaa
I gues i didn't look up any video tutorial before I started with Mouldit. The problems that I faced were as below:
1. I mixed the epoxy and hardner very badly ( I took out full packet and mixed together). Since it was a lot, I guess the two colours gave a marbling effect which means they hadn't mixed together well..as I gather from your video.
2. I made sculptures and I use bowls to dry them when I work with air dry clay. I did the same and spoilt a ceramic bowl from my kitchen.
3. I definitely had wet the dough a lot so it hardened as per this video.
4. I hadn't washes my hands at every step so the remnants were on my hands even after wash. Also I use a marble piece for all my clay projects and it got spoilt quite a bit, alongwith my knife, etc.
Good learning from this video though. Thanks.
Thanks & glad this video was helpful for you ✌️
It's super sticky, I prefer putting a good amount of oil or Vaseline on my hands before using it.
Thanks for the video... I'm a beginner and wasted by mixing entire pack which got hardened before i could finish my work
Happened with me as well, Experimenting, failing and Learning is always the key✌️😁
Waiting for this video since my birth 😅..and it's finally here, damn good man keep it up.. 🤘
Hahaha wow... Was waiting for such comment since birth 😂
Loved the way you are using all your fingers for sculpting 👍
Thank you
Good helpful video
Inlove ur art and colouring pattern thanks for the video
Beautiful and creative works very talented and thank you for this video…..very helpful
Welcome✌
Amazing creations. Would be great if the audio was proper as couldn't really make what you're saying anyways good work. I'm an artist, work with this clay often and tbh it's more efficient than the other costly options available in the market.
Thanks a lot for your review & nice to know another artist who uses this clay🤘🤘. Solved in audio problem in my other videos ✌️.
Sir you have covered much more things about moldit clay, thankyou sir 😇
Thanks a lot bro.. glad you liked it✌️
Very beautiful art work u have 👍 thank you for informative video
Iam watching this in 2023 and thinking 🤔 that this is 3 yrs back 😅😅😅 corona
Thanks, planning to make a 2024 version✌️
Thanks for this wonderful vide really helpful sir
A very helpful video!!! thank you so much
I needed a hardening clay for my Chemistry project. Thanks a lott buddy for the help.
Wow lovely tutorial ❤️💝keep rocking 🌻🎉
Superb mimickry
That was such an informative video!! I wish I had seen it before I ended up with a big ball of dried up clay, in the process of trying to store it. Can dried up clay be covered with wet clay to create something? As in will that bond? Let me knw if you have any idea bout it. Thanks
Thanks
The clay cannot soften once it's hard
But you can use that dried hard clay as a base or a skeleton for the soft clay
@@smmcreations Exactly what I was asking. Thanks. Wasn't a complete waste then..
We need a full time-lapse video of a sculpture making from first till end🙏♥️
Good video 👍
I liked the way you used your hand to say the dialogue it was kind of funny 😂
@@detozplays7855 😂✌🏻Its been like 4 years since this video and someone finally said about it now 😂
This was amazing. but i would like to know if you could use sticky clay to paste a new part to already dried clay
Yes you can use mixed sticky clay
Thank you soo much!!!Just bought this set of clay and i wanted to know if the packets had to be sealed once opened cuz maybe it will harden but you saved me by saying that the resin and hardner doesn't harden unless mixed!!❤
Welcome and do check out my other tutorials as well regarding this clay, enjoy art ✌️
Amazing work 👍
It is the best clay , better than natural clay also,
Informative video👍👍
Thanks
4:01 🤣🤣🤣 thankyou it helped me
Very useful info ℹ️ thanks for sharing 👍
Welcome
One of the best tutorial video! Thanks a lot!
Welcome
Fantastic...
Nice video
Nice video bud.m thanks for sharing
Welcome, Do check out my other tutorials as well.
Thank u so much bro it is very useful
Welcome🙏
@@smmcreations 😊
Thank you sir it is very helpful I needed this information because I need to make school project
Welcome always🙏
Nice tutorial
Can I colour the clay before using it . Like ,can I mix both clays and add a bit of colour to them and then make things with it?
Yep why not... always feel free to experiment
Awesome video. Love the simplicity and the tips!
Thanks a lot...🙏🏻🙏🏻✌️
Nice tutorial 😊😊
thanks bro✌️✌️
Thanks bro.
These are the kind of videos we need.
Omg you are soo creative and yoir art is soo cool, i wonder why you are not viral yet!😭
@@AyshaPrernaKispotta-bq9du Thanks a lot for the appreciation 😇 Keep Supporting and Keep creating ✌️
Thank you for the wonderfully explained video.
This is such a good tutorial
@@angeliena7478 Thanks, do check out my other videos as well ✌️
u r brilliiiiiaaaaanntt
Very very informative. Thanks a lot. I have been looking for clay art. Also can you tell me, what varnish you use to coat the end product ?
Liquitex
Thank you so much. That was very useful for beginners.. Can we use rangeela paint on this fevicryl mouldit clay? Please tell
is Mould It the same as Hobby ideas Shilpkar m seal ?
Is the hobby ideas shilpkar m seal waterproof and fireproof ? Can we stick the m seal using glue/fevicol when making m seal art ? Thanks
Yes its same and you can use glue. It's waterproof like mseal.
Very informative video👍
thanks a lot
Really nice...waiting for more vids...please make mini figures like that of pikachu etc etc
Pikachu Tutorial coming in few days
absolutely loved the video ! Cannot believe how did I find what I wanted to 😅
Thanks a lot for the appreciation, Tried to mention as many tricks as possible to working on this clay. Please do check out my other Tutorial Videos about this clay as well. Have mentioned more tips in those✌️
Hi Shreyas!! Thank you so much for a very comprehensive video. I was able to handle it with ease after watching your video. I have a little question. This clay has a smell even after drying it for many days. Can you suggest a clay for creating small items that don't have any smell later.
Thanks a lot for your feedback. I have worked on few clays, they all had their own smell. So currently I don't know any non smelly clays. But the smells isn't that much according to me.
I mainly use this one because of its high durability.
Khupach Chan .
Waiting next videos
Laukarach✌️
@@smmcreations pl try tutorial of making cat ,dog 😻
I didnt find such detailed video regarding clay. Its awesom. Can you please suggest which glaze is available in india for glazing clay models?
Thank you.
Many use clear coat spray paints for glaze or glossy effects. Do take necessary precautions while using them
@@smmcreations
Thanks
You make amazing clay super heroes Shreyas !! 🤩🤩🤩 I wanted to know how to clean hands when the clay sticks?? It becomes so hard to remove..
Always remove the clay when it's wet, I mainly use a spatula to scrape it off my fingers.
Thanx a lot. I was looking out for such info and u have given it beautifully
Thanks 🙏😇
Nice video! Very helpful.
Welcome
Thank you so much dear sir.. For this vdo. It helps me a lot
Will it give a resin effect without coloring it? I mean Can we mix colors in it And will it give effect like resin or polymer clay?
Good info
Awesome 😍😍😍
Thanks
Awesome
Thanks
Underrated
Very helpful 😍😍
Wonderful tutorial like to banta he 👍🏻
But there is 1 thing I want to ask that after mixing the 2 things do we have to quickly give it the shape we want to if we cause delay will it dry and we won't be able to give it desired shape?
Thanks a lot and Yess you get 1 and a half hr to work on it. Do check out my other tutorial videos to understand that more clearly.
@@smmcreations Oh sure I would check out and thanks to reply me back
great video...was hunting for it ..thanks man!
Hey, and can we oven bake it later? I'm making a stamp mould from this. Pl answer as soon as u can
Nope no need of baking as it gets hard completely after 2 hours.
Yes you can make stamp moulds from it
@@smmcreations thank you so much :)
Can we mix the colour while working with clay rather than painting it after its dried?
Yes you can
But the colour will be much lighter when you mix it.
You'll have to keep mixing the color again and again for this which takes time.
@@smmcreations Okay! Thankyou
Very helpful 👌
Very informative video! Could you tell me which paint should we use? Acrylic or water colours?
Acrylic will be better
Thnq so much i was looking fr such a video only
So today was the first time that I used mould it, and most of it was spoilt. I mixed the entire packet of 50g as I thought that 1) it will take longer to harden 2) was not sure that if I can store the opened packet in some box, and it will not solidify ( pls let me know how u store the product after opening the seal). So, was able to use only 10% and the rest 90% got hot, probably due to some chemical reaction, and became a stone. I used a steel plate, on the reverse side to role out the clay, and found that it was sticking ( next time I will use polyethene as u suggest )and I donno how do those youtubers do it, every time I was picking those earthworms ( it was my first attempt at making a lippan art), it would break. I didn't use any water, but I did wash my hand after mixing the clay Any tip would be welcome.
Well all these things have happened with us all during the first time.
Its very common for this to happen for the first day, just keep practicing daily and try mixing small or required amounts of clay only.
You can store the opened resin and hardner packets in a box or even in a open area, there's no issue with that. Please do check out my Various tutorials on this clay, I have tried to explain various doubts.
Can we mix fabric colours in the clay to make it colored clay, like we can do in the case of homemade air dry clay?
Yes you can mix colours in this one, Haven't tried that in the air drying one
@@smmcreations Thank you for replying,😊 I'll try mixing colors in this clay, I find it easier to work with colored clay than coloring the finished product.
@@_asmi_ 👍👍
This video is very useful 👍🙏
Can we preserve this before mixing for future use?if yes how?
thank you for such an informative video
Very well explained 👍 thanks
If I want to join two pieces, how can I smoothen it so it does not look like they are not two separate pieces? And do I need to use glue or it can stick to other piece?
@@vidhishah08 You'll need to use glue to stick them. Try using a sandpaper to smoothen it.
Sir, I have a problem... once I mixed up the 2 components, I took a small amount of the clay and kept aside the rest mond... Soon it dried up and getting hardened enough.. Then I couldn't be able to take another bite of the mond... Sir, what to do?? How can I stored away from getting harder soon??? Please help 🙏
Take only required amount of the two components and then mix it, once you mix it, it will harden within 2 hrs and cannot become soft later.
You can watch my amongus or Pikachu tutorial you'll get an idea
It's very helpful for me. I have problem with colour fixing. In this video I just find the way you fix colour. Superb work.... Do you use varnish?
Thanks a lot.
I used to use a varnish.. now I don't
@@smmcreations I must try your technique. Then i must give you feedback... It's really helpful... Thank you so much.
@@chandranichakraborty3758 Sure✌️
I just have a question, where should we keep the left mouldit clay ?? , I mean can we keep it in air tight box ??
Yes you can or you can just keep it normally, But if its mixed up then you'll have to use it within 2 hrs
Sir can you make that iron Man mk 85 head tutorial video please in this week
useful video. thanks for subtitles.
Very helpful video! Thank you!! I wanted to ask one thing.. have u used different types of clay..if yes..can u make a video on them?
I had just used them and found out this one was convinient for me. And As I have been working on this one since 2 yrs, I made a video on it.
But I'll see if I can make such a video
Beautifully explained
Great Content! I had a doubt - what if this clay is immersed underwater for aqua scaping designs? will it lose its hardening quality? or is it water proof?
Thanks, This clay is water proof for sure. You can try it out
Amazing, thanks
Thanks for the detailed video. It was informative. I wanted to ask you, whether we can do a epoxy resin flood coat over this clay sculpture to have a glossy finish?
Yes you can
My mouldit clay was dry as it was old one probably one year back, but when I opened it, it was bit hard, I used some water but it was very watery so I added few drops of water it became watery like, I den got idea to pour in cone and use it, what do you think, it was correct plz correct me
This was amazing, but i would like to know what kind of paint u r using
How much time is needed to harden the clay?
hello my clay is not drying can you tell me why.
i did it for the first time and mixed whole pack at ones (25/- pack)
i did not use any water just mixed resin and hardner part, moulded and left whole night but no result😕
Don't know how this happened. It hardens all the time, Do buy a new packet and try out
similar thing is happening with me rn, if you were able to dry it up later and remember how you did it could you please share the tips?
Umm hi awesome very informative video but I have a question if you don't mind how long does it take to dry ??
Nope, I am used to the drying time
Thank you so much for this one Shreyas...
But I am facing a different problem...
The white part.... Not the hardener.... The white part stinks.. As that was hard...can yoh please help me with a suggestion.... It's difficult for me to work.. It stinks badly on my plan while kneading... Please suggest something
If the white part is hard then the clay is expired. You'll need to buy a new one.
There's another video dedicated to that on my channel as well. Do check out
Dammmmmn that scared me!!!! 4:00 But that was cool!!!! 😂😂
Thanks for that😂✌️
Hii
My clay Dries Out and It is like a Brick now so what to do I want it to be become normal clay
If its after mixing the resin and hardener then it cannot come back to normal. If it's before mixing then that might be a problem with the material
@@smmcreations okay
Kindly tell what varnish should I apply on coloured fevicryl clay mouldit pieces , earlier I was applying Asian paints clear synthetic varnish to make it fade proof but ever after months the products are sticky because of the varnish. Which varnish should I use then so that after 2-3days it wouldn't be stocky but glossy.
Try Liquitex Varnish
Wonderful tutorial!
Thank you. I already subscribed. I just want to ask you that, if i.want to do an art work on the ply wood pieces or canvass board how to stick it ?
This clay is very sticky once its kneaded,
So you can directly stick on the wood and work on it. Or the other efficient method is make your art separately and then stick it on the wood or canvas board using an instant adhesive like astral vetra, etc
@@smmcreations Thank you
Very informative
Should we use any glue to stick this clay on coffee mugs or we can directly do decor without using any glue to stick on mug
Do use a glue as that will stick it permanently.
You can check out my recent tutorial where I have explained this as well.
ruclips.net/video/Xs9WJ3R1COc/видео.html