How to Replace Front Brakes 08-12 Ford Escape
HTML-код
- Опубликовано: 20 июн 2019
- Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS01684
This video shows you how to remove old, rusty, noisy, or grinding front brake pads and rotors from your 08-12 Ford Escape, and replace them with new, quality, engineered to fit parts from TRQ.
• Check here for more videos on the 2008-12 Ford Escape: • Ford Escape 2008-2012 ...
This process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
Tools you will need:
• 18mm Socket 1aau.to/oa/1AXAA00043
• 19mm Socket 1aau.to/oa/1AXAA00043
• Pliers
• 1/2 Inch Breaker Bar 1aau.to/oa/1AXAA00078
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/oa/1AXSS00035
• 7mm Allen Wrench 1aau.to/oa/1AXAA00007
• Large C-Clamp
• Wire Brush 1aau.to/oa/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Ford Escape 2008-2012 2nd Gen: • Ford Escape 2008-2012 ...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
I have the 08 and the caliper bolts are 9mm not 7mm
+Allen Keith The part in this video fits your application as long as you have a 4WD, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-TRQ
Super helpful video, thank you!
Heads up to others, I needed a 9 mm hex wrench for the job, not a 7 mm like they use in the video. These are 5-10 bucks and are well worth ordering beforehand just in case. 9mm is not common in many sets.
You sir, are correct. I watched two videos and they both said 7 mm, when in fact it was not a 7 mm.
Apparently some (but not all)models in 2009 and older used a 9mm hex. Sometime in 2009 (I think) they changed to 7mm hex. But any replacement caliper will use 7mm hex, so the drivers side caliper pn my 09 escape used 9mm hex and the passenger used 7mm (apparently it had been replaced by the previous owner) For some reason I had a terrible time finding a 9mm hex socket. Went to 4 stores before I found one, although they are easy to find online.
Good job Jeremy going step by step. Super helpful as previous comments indicated. Thank so much.
Thanks! This was perfect for my 2011 Escape. Step by step and easy to follow.
Very helpful video. Thank you.
The Allen bolts, are they slide pins? Didn’t see you clean them off and re apply grease to em, not necessary for these cars?
Very good Video and work!
Please point out whether it's a phenolic or steel piston.
Do you have to use a torque wrench?
Is it true theres 2 different rotor sizes on these? I have a 2010 v6 and im just wondering what size rotors are used. I called the parts store and they told me there were 2 sizes….
Escuse please what engine is Ford escape 3.0
Thank you bros👍🏼🙏🏼
+Gracemiko Honda #1 saaa. Thanks for watching our video! 1aau.to/m/Shop-TRQ
Thank you
110% helpful. Thank you so much.
oh, why don't you take 5 sec to show how to inspect the brake pads wear :(
Pardon my language, but how the fuck you get that sprin clip back in so easily? 😂😂😂😂 I hate doing breaks on my wifes escape because of those springs. 😂