I’m assuming that HPA in GBBR will yield less shots because of the air needed to move the bolt. Polar star I don’t think has a blow back. Green Gas in NBBR or even pistol yields more per mag of gas vs GBBR
Polarstar HPA eats less air because it only has to push the BB out of the barrel. HPA tapped GBB eats way more, because you need to push out the BB and move the heavy slide (heavy compared to BB). There is no damage due to pressure, because you can set your regulator to the same pressure as Green Gas or even lower. You just need to lube your gun, because there is no lube in the air, as opposed to Green Gas, Red Gas, ..., which contains (usually) a bit of lubrication in the gas (which is just LPG or propanbutan and silicon oil I believe)
WE and many other company's are TM clones. My we vkock takes TM hop up, magazines,etc. Same with my scar l gbbr. If you you don't trust me simply look at the notch that the mag catch fits into, and the feed lip on the mag to ensure they do match, but I promise you they do work
Wrong information sir! There are more than these two options which is basically only one option bc both of your "options" include tapping an gbb mag. Better options are convert your gbbr to daytona engine which keeps the gbb and you can run saeg mags (600€) or you can buy a hpa converter for your magwell to also use saeg mags (100-150€). Greetings
Does the air run out a lot faster being tapped than Polarstar HPA? Is there any damage/wear using HPA vs green gas?
I didn’t notice any difference. Sorry for the late response
I’m assuming that HPA in GBBR will yield less shots because of the air needed to move the bolt. Polar star I don’t think has a blow back.
Green Gas in NBBR or even pistol yields more per mag of gas vs GBBR
Polarstar HPA eats less air because it only has to push the BB out of the barrel. HPA tapped GBB eats way more, because you need to push out the BB and move the heavy slide (heavy compared to BB). There is no damage due to pressure, because you can set your regulator to the same pressure as Green Gas or even lower. You just need to lube your gun, because there is no lube in the air, as opposed to Green Gas, Red Gas, ..., which contains (usually) a bit of lubrication in the gas (which is just LPG or propanbutan and silicon oil I believe)
@@vaclixd4442 Where is the regulator located? It seemed to me that this is the board that is connected to the engine like polarstar f2
@@g4rb4g3 The amount of air that flows into hpa engine is set by regulator on the tank connected to the engine.
How about those systems that hpa tap from te grip and still keeps the blow back functionality, do you know how do they work ?
frog engineering
Would this method work on a Western Arms system mag
What theading style fit the AW-customs drum mag? Was it the same kjw/we theaded hpa tap?
WE threading
This helped. Thanks man
What about the gun not being rated for CO2 - boomstick??
HPA tanks have a regulator
How do I do this with my KWA LM4D?
What ups buddy its the only réplica or i can used all the GGB with the corrects magazines
Yes only magazines that fit your gun will work
@@mr.hi-capa3798 thx dude You are fucking beast
Yo what screws did you tighten again?
Recently bought a TM MTR16 GBBR.
Can’t find a drum mag designated for TM. Do you think the AW Customs for m4 platform would work in the TM?
I don’t know if it will fit
It absolutely WILL fit
WE and many other company's are TM clones. My we vkock takes TM hop up, magazines,etc. Same with my scar l gbbr. If you you don't trust me simply look at the notch that the mag catch fits into, and the feed lip on the mag to ensure they do match, but I promise you they do work
Not its not
@@blakedougherty6242we clones the pistols but they don’t clone the mws system. Their pistols may be based on tm spec but their gbbrs arent for sure
They spell it evike on the site but they pronounce it “e-vick”
Compatible with Tokyo Marui MTR16?
Any responses?
Interesting
Wrong information sir! There are more than these two options which is basically only one option bc both of your "options" include tapping an gbb mag. Better options are convert your gbbr to daytona engine which keeps the gbb and you can run saeg mags (600€) or you can buy a hpa converter for your magwell to also use saeg mags (100-150€). Greetings
Dumb question but do hpas require to pull the charging handle when reloading?
@@sliponbanan5296No they don’t
Nie polecam szybko może się złamać przy gwincie
hpa is LAME