Well explained first i didn’t know how to use autocad but now after watching this video i know how to use line, polyline, offset, trim, extend, join, mirror, and some usefull skill....! Thank you keep going
At 13:11 in your video you mention you got the distances (0.7m) for your first 45° corner of the outer wall from the pdf floorplan but i dont see the distances you speak of... great channel yhough it is very helpfull!
Just learning how to use AutoCAD and a problem I have now is that when I zoom in I dont get the grid inside the grid (hope you understand that) so just wondering what grid spacing size you were using?
Hi + The3DSMaxinator. You should turn on Polar mode. It is an icon located in the status bar (the group of icons located at the botton of the screen). It has a shape of a circle with a radius.
Probabily you have to zoom in your drawing. Are you using a Mouse? It's harder to use the touchpad, although is possible. An alternative way to zoom is using the command zoom. I hope it helps
Im unable to download the pdf floor plan dimension via the link above as i am not active on scribd. Please could you provide anohter link to download the pdf,plsssssssssssssssssss. @CAD in black
Hello +joker mailer. In my country, Scribd is a free website. You are not the first one complaining that cannot download the file so I am wondering if in some countries, you have to pay. Maybe you can check again, or are you sure it is not possible to download it?
Hi +Rousha Magdy. I have changed the links. Now the files are located in google drive. Can you try again? drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
Hello. I used the thickness that I showed on the video. However, you can just use a different thickness. This is just an exercise, and the goal is that the students get used to the autocad commands with practice. The measurements are not very important here! Thanks a lot for watching. :)
Hi again +Mihail Petrov. I have update the links. Sorry for that. Now you should be able to get the links. drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
I realised this users now have to pay using that website. I am really sorry. I have already changed all the links of my exercises. drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
Hi +Jabob Powel. First of all, thanks for your comment. That depends of the country where you are. I think most of English speaking countries use inches, but in the remaining part of the world there is a preference for metric units. I don't know if there are countries which use a different system than those ones.
Hello there. Just want to know that I want to learn auto cad at its best. Can I learn from scratch to pro from you video tutorials? Please respond to my msg cuz I really want to learn it and I don’t have money to spend in academies. Please help me out on this. I will highly appreciate your positive response. Regards.
Hello Kristof. I fast forward parts that I was repeating a specific method. To follow the video easier, please download the pdf file: drive.google.com/file/d/1jeQBvroXIpyVwju67W433K8yDtr4ii3u/view?usp=sharing
Why be rude! This fellow has an accent ... big deal! His educational style is excellent, and if you don’t feel you have anything to learn from him just leave ... without being rude. We won’t miss you, neither will he!
![Megan Thee Stallion - Bigger In Texas [Official Video]](http://i.ytimg.com/vi/QxTkZTLWdo4/mqdefault.jpg)
This guy deserves a 1M subscriber.
Thank you very much +Harley pewpew
@@CADinblack you are such a blessing to us.
Unexpectedly helped me out of nowhere! Thanks sir
I happy this suited you!
Year 2021 and this video were still beneficial and informative! Thank you!
Well explained first i didn’t know how to use autocad but now after watching this video i know how to use line, polyline, offset, trim, extend, join, mirror, and some usefull skill....! Thank you keep going
Thnaks soooo much! You are an amzing teacher and person!
Thanks a lot Ayten. I just try to do my best. I am happy you like these videos.
*I am an Indian and I'm here to learn English from you* . Thank you
aleeyuannuree000@gmail.com
Thank you. I am finding your tutorial very educational. Simple and easy to understand.
I love this channel, he inspired me to create my channel
Thanks for your support +Lazy Arquitecto Automation. I wish you good luck for your channel
CAD in black Hope we can collaborate in the near future. Keep up the good work!
Excellent...I like your tutorial, It was good for me, I did not knowing nothing about Autocad. Thank you.
At 13:11 in your video you mention you got the distances (0.7m) for your first 45° corner of the outer wall from the pdf floorplan but i dont see the distances you speak of... great channel yhough it is very helpfull!
Same
Welcome back. Great tutorial, keep it up... 👍
Thanks so much +Asif. Next week I will release 2nd part. Keep learning
wonderful teaching skills, please develop sectional and elevation plan for this plan as well.
Thanks a lot for your great effort for us!
Thank you so much for your sharing !.
My pleasure! +Jar Eain
God bless you CAD in black...i will surely follow this tutorial.
Mmm how come for the offset, following your instruction, I'm not able to select all the lines but only create offset for one wall? thanks in advance.
Nicely explained , Thanks for your efforts , sir! Waiting more videos like this :)
Thank you so much +Ozan Şen
Thank you for your assistance, very well explained.
Thank you very much +
WHITE-MAN channel
Thank you, good tutorial!
Please share how do you measure 0.7m to draw diagonal line as it does not mention in PDF plan? Thanks!
Thank you sooo much very helpful
Thank you very much
Great Tutorial thank you
Very helpful! Thank you!!!
I got the wrong midpoint when I use the mirror. I did not get the exact 1.50 (.75,.75) do you know why? Thank you.
very good tutorial man.
Just learning how to use AutoCAD and a problem I have now is that when I zoom in I dont get the grid inside the grid (hope you understand that) so just wondering what grid spacing size you were using?
Probabilty you have the grid and snap spacing to large, because this drawing is in meters. Try to make it the spacing to the centimeter. 0.01
Great tutorial!
Good tutorial
Thanks a lot for watching Arvind
all of the best
Thanks +NAYEMpro
Is there a link to free pdf version without needing to subscribe to this website?
I tried to do it but every time I am putting the offset it becomes too big than the drawing hahaha. Beginner here and I don't know what to do.
How do you turn on the option to see the dotted green line, or is this a 2019 thing only? I use 2018 currently.
Hi +
The3DSMaxinator. You should turn on Polar mode. It is an icon located in the status bar (the group of icons located at the botton of the screen). It has a shape of a circle with a radius.
Why my line is too small? I set it in meter but it looks like a dot.
Probabily you have to zoom in your drawing. Are you using a Mouse? It's harder to use the touchpad, although is possible.
An alternative way to zoom is using the command zoom. I hope it helps
Im unable to download the pdf floor plan dimension via the link above as i am not active on scribd. Please could you provide anohter link to download the pdf,plsssssssssssssssssss. @CAD in black
I updated the links, I am sorry for that. click there drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
Thank You!
Thanks man
You are welcome
Thank you
Hello why that when I encode the length of my polyline and enter nothing happens 🤔🤔🤔🤔🤔
Check out to zoom in, to see if the line appears. You could be drawing in a very reduced zoom.
HI
I am unable to download the drawing, is there another way that i can get it please?
Hello +joker mailer.
In my country, Scribd is a free website. You are not the first one complaining that cannot download the file so I am wondering if in some countries, you have to pay. Maybe you can check again, or are you sure it is not possible to download it?
It is asking me to set up a payment scheme in order for me to download it. otherwise it won't let me download it.
i can't download the PDF file>>> it gives me that i have to pay to download it!!!
Hi +Rousha Magdy. I have changed the links. Now the files are located in google drive. Can you try again? drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
@@CADinblack wawwwwwww......thank you......it works!!!!!!!!
thank you sir but how to know that what should be the thickness of internal wall and external walls ? please clear this .......sir
Hello. I used the thickness that I showed on the video. However, you can just use a different thickness. This is just an exercise, and the goal is that the students get used to the autocad commands with practice. The measurements are not very important here! Thanks a lot for watching. :)
How to remove the producer name when we print the drawing?
Very clear. May I know the name.Easy to beginners.
Thank you very much :)
I got confuse in 12.04 the diagonal lines.
"Diagonal lines" is the section of the external wall that is not vertical and horizontal. I used supported lines to help drawing them.
@@CADinblack ok sir but can you do a tutorial about hvac 2d or 3d in autocadd
Please upload the PDF to a free file sharing site, this one makes me go for a 30 day trial...
Sorry for my delay +Mihail Petrov. The pdf file, it is already online. Check the link in the description.
Hi again +Mihail Petrov. I have update the links. Sorry for that. Now you should be able to get the links.
drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
i couldn't download this pdf file . please add another link
I realised this users now have to pay using that website. I am really sorry. I have already changed all the links of my exercises. drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
@@CADinblack Thank you for both reply and cad tutorial 🌷
Where’s the pdf available
In the description of the video. In this file you can get all exercises:
drive.google.com/drive/folders/17LTUWHMsX_wJRi7b41A0wsMmAl8M-5wp?usp=sharing
I copied the units yet if i type 3.3m then it wont work
Hi +Myco Sarsalejo. You can't type "m" on the value
Try to type only 3.3
Sir can you provide floor plan for practice
Hi +Bosco Win. The floor plan is located on the link in the description: www.scribd.com/user/332635139/CAD-in-black
heeelpp.cant see the dashed green line and am using autoCAD 2019...
You should turn Polar Mode on. The icon is located in the status bar.
Sir please upload the pdf document to some free file sharing
I can't download it for free from scribd website
This should be for free. Try again. If you don't manage to download it, I can send you by email. cadinblack@gmail.com
@@CADinblack same here .. and can i draw this plan with autocad 2017!
Hi +Elie Azouz I have updated all my files. Click here:
drive.google.com/open?id=1jeQBvroXIpyVwju67W433K8yDtr4ii3u
@@CADinblack thank you .... RUclips should include you in their rewind video every year
Why won’t it let me offset the whole thing instead of just one damn line
Hi +James Troutman. Use the command Join to convert all the lines to a Polyline. Then, apply the offset in the polyline. Let me know if it worked.
auto cad 2018 drawing is very dim (Not bright) .thanks
You use the wrong type of dimensions it's supposed to be feet/inches
Hi +Jabob Powel. First of all, thanks for your comment.
That depends of the country where you are. I think most of English speaking countries use inches, but in the remaining part of the world there is a preference for metric units. I don't know if there are countries which use a different system than those ones.
Hello there. Just want to know that I want to learn auto cad at its best. Can I learn from scratch to pro from you video tutorials? Please respond to my msg cuz I really want to learn it and I don’t have money to spend in academies. Please help me out on this. I will highly appreciate your positive response.
Regards.
Italian?
good tutorial if you just mentioned properly the DIMENTIONof each line so we can Follow step by step...you skip and fast forward it. hehehehe
Hello Kristof. I fast forward parts that I was repeating a specific method. To follow the video easier, please download the pdf file: drive.google.com/file/d/1jeQBvroXIpyVwju67W433K8yDtr4ii3u/view?usp=sharing
I subscribe to your videos could you help me get certified in AutoCAD
Who the hell are u ?
Learn English then we can talk.
Why be rude! This fellow has an accent ... big deal! His educational style is excellent, and if you don’t feel you have anything to learn from him just leave ... without being rude. We won’t miss you, neither will he!