My TOP 5 Airsoft Hacks you MUST KNOW!!! ✋
HTML-код
- Опубликовано: 13 окт 2024
- What is up guys?! These are my Top 5 Airsoft Hacks you MUST KNOW!!!
✅ Recommended Gear: www.amazon.com...
➡️ #1 The Magic Pin
➡️ #2 The Bevel-to-Pinion Alignment
➡️ #3 The Silicon Seal (How to fix leaking GBB handguns magazine)
➡️ #4 The Angle of Engagement
➡️ #5 The Zombie Lipo (How to revive any dead lipo battery)
[ITA] 5 Trucchi da conoscere nel Softair!!!
--------------------
Follow Us at:
chupacabraoutdoor
chupacabraoutdoor
digitalobserverteam
--------------------
THANKS FOR WATCHING!
--------------------
![[TUTORIAL] BEVEL-TO-PINION for Airsoft AEGs GEARS: Guide To Perfect Shimming](http://i.ytimg.com/vi/ZahpxfCsSAY/mqdefault.jpg)
![[TUTORIAL] BEVEL-TO-PINION for Airsoft AEGs GEARS: Guide To Perfect Shimming](/img/tr.png)
This channel is so underrated!
Zi9makin6 absolutely! Learned how to shim bevel to pinion on this channel! He’s a legend
I never knew about that zombie lipo hack. I have the same charger too so I will definitely use that! Thanks!
Due to a cheap nasty NUPROL charger, it almost killed 3 of my lipo's. (Cell no 2 were drained) Using the zombie hack with a newly purchased B6 balance charger, I saved all 3 lipo's and both cells on each battery are perfect now. :)
Finally “airsoft hacks” that are really really useful
I've never gotten so many useful and unique Airsoft tips in a 5 minute video! The only one I was previously aware of was the angle of engagement... thanks for sharing this!
What brand are the "magic pins"? The only I've found so far are for WE / G&P gbb m4s. Are those it? I wanna get one for my ICS aeg.
Great tips! Never knew something like the magic pin existed! I've always been messing around with alternative solutions to eliminate the wobble, but this is way better.
Where did you purchase the pin?
This is why I love your channel! Thanks to you I properly reshimed all my guns and use all your little teching tricks to make my airsoft life easier. Now most of my group pays me to reshim there guns and fix leaks.
Wow! That's great to hear, glad you got that far with your tech work! 💯
for AOE, make sure you measure and correct this WITH the spring and spring guide in the gun. this takes into account the compression of the sorbo under load. If you dont do this your corrected AOE will not be corrected
LOL sorbo
Best video and channel for new airsoft players like me!
I never had more struggle to understand someone speaking English as much as this guy
Why is the style of this video so good?
awesome tips!
Great hacks! Another thing I do is get a rotary dremmel tool with a wire brush attachment and polish the inside of the gearbox where the piston slides and where the tappet plate slides for smooth low friction movement, works great!
Yeah that's a great tip! I do it as well! 🤙
inner barrel stabilization with plumbers tape.
I did the same. Good thing is that if you put a round or two too thick it will slide a bit sideways and retain the size to be stable around the barrel.
NICE ONE! 🤙
I use electrical tape instead. Lots of my guns have thicker gaps and usually one is all I need
I use the angle custom 1, 2 or 3 inch outer barrel extensions that have a stabilizing O ring inside. It's cost you 10 - 20 bucks but I really enjoy them. Specially if I'm increasing my inner barrel length hahah
Nerf darts can do the trick ;) thay can compress easly and fitin sode puther barrels were the inner wobbels or rattles on shooting and moveing and if your inner barrel is longer and hideing inaide a silencer i put runbber bands to stableize vibration on it
Thanks for the tips!
Thanks Man!!
does the kit hack work with umarex mags that also have the tread of the screws f'ed?
You are a Legend. Amazing video
Love the channel mate zombie lipo....awesome!
Really useful, great content mate.
The Hiss Of Death! How many times have I heard it :-D
Hey what was number one the handguard to lower body pin you said.
I didnt know Mario played airsoft.
I would love to work from the bevel upwards.. unfortunately to squeeze the V3 back together you need to be an octopus, mine took me about 8 hours and it exploded on me at least 4 times while trying to line it up, nearly cried from the stress when I finally got it working.
just yesterday assembled a V3 where every single spring and attached part made an attempt for escape as soon as you let go of them. Some V3s are so bad lmao.
You ate the messy with that silicone.
Surely gonna buy the magic pin😍
Did anyone else hear the burp at 3:48? Also great video!
aaaaand subscribed
These are amazing. Your very underrated
To fix receiver wobble without a magic pin you can put an O-ring over the upper receivers front pin hole protrusion. The lower and upper joined will squish the O-ring and take up any space.
usually instead of the silicon sealant i take the rubber ring and soak it in silicon oil for a while to let the ring soak up and expand. Works everytime
Insanely awesome channel! I'm ashamed i didn't know you. Immediately subbed
this guy actually knows whats what
These tips are great!
Wow an airsoft tip video where I only knew a handful of them. Thanks for the information
I really enjoy this channel. Thank you for posting such high quality high definition content. Great accent too!
Thanks bud! 🤙
it helps me a lot..
Which brand for magic pin?
The Silicon Seal is what brand/type?
Amazing video!
Ciao, ottimo video e soprattutto utile, potrei sapere dove trovare il silicone visto nel video,uso prevalentemente asg gbb e sarebbe una manna dal cielo. Grazie mille e ancora complimenti :)
Ciao Michele! Ho utilizzato del silicone universale nero della Bostik, si trova facilmente!
All the other tricks are fine but the lipo charging one is extremely dangerous when a lipo gets under 2,7-8v per cell it's extremely dangerous to charge it and even more so when you use a Nimh charge mode as the cell is likely internally damaged ...... Just buy a new battery it's cheaper than a burned down house ..... AND You meant current not voltage
Nice vid thanks for the hacks!
Another importand airsoft tech, is to upgrade your sidearm's piston head. The piston head normally will let a lot of unused gas escape the chamber - figuring out a way to make a better seal to your piston head will propel the bb further up the field simply because there will be much more air pushing it forward.
Btw you paid for that extra air but your pistol is not using it, infact it is letting it escape!
Grazie per il video, sempre bene rinfrescare la memoria con questi hacks. Il silicone lo puoi usare anche per le valvole di riempimento per i caricatori di GBBs, oppure è solo riservato alla base del caricatore ? Se devi smontare il caricatore per mantenimento o altro, viene facile estrare la base una volta che ci hai messo quel silicone ? Grazie in anticipo !
Teoricamente si può utilizzare al posto di qualsiasi o-ring, tuttavia consiglierei di utilizzarlo solo nella base del caricatore poiché si tratta di una modifica "irreversibile" o quanto meno é una condizione difficile da ripristinare. Mentre può essere necessario sostituire le valvole per difetti che vanno oltre la tenuta dell'anello di ritenzione in gomma, la base del caricatore ha l'unico scopo di chiudere il serbatoio e la manutenzione del caricatore si può comunque fare senza rimuovere la base quindi non é una priorità riuscire a rimuoverla.
Spero di essere stato chiaro! 👍
@@CHUPACABRAOUTDOOR Sei stato chiarissimo, grazie ancora 🙂
Always charge as slow as possible! Your battery will thank you for that
Might you recommend a company makes consistently good quality metal gearbox and gears. what about a good gun with that gearbox rifle or pistol that's fairly accurate
You owned a new subscriber just for that Gadsden Flag! 🐍
The vids about setting the AOE and the bevel to pinion are a real life saver. Cheers to you good Sir and keep those vids coming!
Good shit man!
what black silicone lube is that???
Bravo!
Some good tips, but also some bs, pinion to bevel engagement is done by adjusting the motor height, not by shining the bevel gear, angle of engagement adjusting using sorbothane pads does nothing except reduce the swept volume of air in the cylinder, reducing velocity, and will, in a lot of cases, increase the rate of wear in the piston teeth, it's also a pointless exercise
Where do i find the magick pin to buy? many thanks!
Hi bud, don't know where you're from I know Evike has it in the US, RedWolf in HK...or just type "airsoft magic pin" on google!
@@CHUPACABRAOUTDOOR i'vefound at redwolf, many thanks!!!
the lipo hack is not a good idea the cells become unstable and will very fast become uneven balanced which can make it unstable and burn
What is this song playing?, it's got some gusto to it.
what a funky ass accent and that’s coming from somebody who’s scottish😏
you erd it!
what is the sprrr or what ever its called
Can the seal trick work on gas blowback rifle mags?
Russer243 yes it will but it’s much harder to keep it from getting messy, of course you can always clean it but it’s just a bit more difficult than pistol mags
2:20 then how do I dissasemble it later if I need to?
The peeeenion!
Is that a Korean army camo cpc on your back?
Nope, it's an italian multicam Special Equipment Gamma MK2 vest!
Sub and notification. Great vid.
Hi, great video, there are 2 hacks for gas blowbacks that you NEED to know, 1 is to use bearing oil in the hammer assembly whicg means a smoother trigger action and sanding the sharp edges off the rails which hold the slide in place
Great! Will definitely try! 😉
#2. How do I do a shim job for free without buying shims?
Really hope everyone using a lipo is using a voltage sensor on the balance lead that will scream when it reaches 3.2v per cell. Performing the charge hack shown is okay but can also lead to a fire, with the lipo balance sensor only costing 5 to 10 dollars for 3 of them as well as only being the size of a dime there is no reason not to be using one.
A cobra vai fumar
Bella per l'italiano
Let me guess.....you are from italy
Your accent is so beautiful
Dove lo hai trovato il magic pin ?
Ciao Flavio, lo produce sia la Ra-Tech che la G&P in Italia dovrebbero averlo in parecchi!
how to flat hop bucking
Great engrish
Actually the second one doesn’t matter as long as you do it correctly
Perché non fai un video in italiano ????
Because knowing and speaking english is good for more people and views. Learn it, may come in handy.
Stile!
Grande ma sei italiano?
Grazie! Si sono italiano! 🇮🇹
@@CHUPACABRAOUTDOOR complimenti vivissimi per il canale e per il parlato sono fiero di essere un tuo nuovo iscritto
Worst tip ever.. NEVER EVER put silicone in your gaz magazines.. it will leak overtime anyway and it make a mess!! Just change the damn oring
"Reviving" a lipo battery like that is criminal.. people might actually get heart and best case burn there gun... please do not use damaged batteries externally or internally.. When a battery gets over discharged and then charged again the internal resistance of the battery increases, as a result the mAh is lower and most importantly the discharge current... A very dangerous and unstable battery that can be stressed and explode very easily... Please don't do this to your self buy a new battery...
I wonder how many people have fucked Up their GBB magazines after watching this.
I really hope no one did! 😂😂😂
My biggest airsoft hack is to just use a real gun they'll definitely call their hits.
I'm sold. Subscribe
Your accont anderson risk
First!
Number 1 hack. Just bring a real gun. You will win guaranteed.
Bro i think you fixed my battery thanks for that, it just wont go past 10.96v is this fkd?
why you have like an italian accent XD ur 5 tricks helped me a lot especially that one for the pistol :D
Maybe because he is Italian 🤷♂️😂
negativeairsoft always shims the bev last lol but i like this opinion