LML PERFORMANCE SWITCH LSP INSTALLATION - UPDATED
HTML-код
- Опубликовано: 18 окт 2024
- Duramaxtuner.COM introduces LML Switchable Tunes with the LSP - LML Switchable Power. This video explains how to install the switch.
For more information about our LML Tuning and LML Switchable Power - check out:
duramaxtuner.co...
Any questions, please give us a call 815-568-7920
![COLOMBIA vs. CHILE [4-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 10](http://i.ytimg.com/vi/TDjN4W3yy1k/mqdefault.jpg)
Anyone with a 2012 to 2016 should connect yellow to 11 and black to 35. They are both open and should not cause you to spark any check engine lights or fuel temp codes. If you have a 2011 there is another yellow wire in 11 that needs to be removed and new yellow goes in. Set old yellow aside with tape. This came from PPEI directly.
I only have a light blue and a white wire what position should I place them? 2016 lml
@@roryrohrer7640 did you figure it out
@@how7783 yep runs great shifts as I have always thought the Allison should shift with the TCM tuning
I bought the Stealth 64 and 5p switchable tunes with TCM tune, for my 2016 LML 3500hd, and went from 16.4 to 12.2mpg… 😳😢 It does run much better however.
I have a 2013 Denali with ppei tuning. I have the autocal with the tunes. When i flash the truck does it load all the tunes to the ecm? I thought it was just one at a time. I would love to buy your switch but not sure where the tunes reside.
That would depend on the file you are flashing. You would want to contact your current tuner to verify you have switchable tunes setup.
If a wire gets cut or the switch becomes damaged, will it default to level 1?
It should. You can always check using EFI Live and hooking up to the OBD with a PC laptop.
Hardest part is the dang wire harness release!!!
Hi, I have a 2011 LML. You say that if there are wires in spots 11-48 pin it like a 12.5 to 16 model year . I have wires in those pins and my tuck production date is 1/10 so it’s a 2011 so which is the correct pin holes ?
Thank you
Give us a call, we will help you get it correct. 815-568-7920.
I received two emails from the company after my purchase. One link is from 2017, the other 2019. About the 4:00 mark The video from 2017 says use pins 27&46 for 2012.5 - 2016 and pins 11/48 for 2011-2012. The video from 2019 says use pins 27&46 for 2015/16 and use pins 11&48 for 2011-14. So, which pin out do I use for my 2014? The tech told me to follow instructions for 2015/16
This is incorrect on a 2015 - 2016, I havent figured out the correct wiring yet but I will try to update shortly. 27 & 46 are for the Injection pump fuel temp sensor on the connector housing closest to the firewall.
Give us a call, 815-568-7920.
Early 2015 is 11&35. I’ve been having issues since i installed it after watching until someone corrected me. Fuel temp
codes
Same glad I wasn’t only one
It would be helpful to mention which wire goes to which pin position.
either wire from switch can go in either pin location
I have a 2015 lml, why do some say 27 and 46 and others say 11 and 35?
There is an early and late model version of the 2015.
@@Duramaxtuner So which is the early and which is the late pin hole location
I have a 2016 witch would I use
Mr Kanook did we ever find an answer ? Lol
I did 27 and 46 lets just say that wasn't even close. my truck is acting all sorts of funky now. swapped over to 11 and 35 and its running the switch fine. but my ambient temp sensor hasn't given me a reading sense...
So to recap. I have a 2015 and my pins were 11 and 35
I have a 2016 so what numbers would I use?
Jim Warman it specifically says in the video lmao , watch it all the way thru
@@tylergilbert2540 Hi yes I'm confused im reading the comments and their saying that theirs a early 2015 thats confusing i have a 2015 model im trying 27 and 46