Thank you! My fan blower is making noise at the higher fan speeds, which began when I replaced the old filter, which had debris and probably some fell into the fan. I understand this is a fairly common issue.
Thank you for your video! It helped me clean out the fan which was causing noise due to some leaves that got inside. Saved me a trip to the dealer. Thanks again!
Thank you! I had the cabin air filter replaced on my Mazda 3 and my fan was making noise. I used this video to take the fan out and found a leaf in it. Popped it back in and no more noise!
Thank you! I discovered a whole bunch of acorns and leaves in my fan due to a big hole have been chewed through the cabin air filter. I'll give this a whirl soon as it looks straightforward.
I took blower fan out of my CX-5 very easy but I did not have the same clip to detach the fan wheel like it was in your video instead it looks like a piece a plastic wedged in between to clips any idea how to remove plastic clip without breaking. Thanks.
Great i was searching videos on blower, i did find how to replace it, which is same steps, but those videos didn't say about cleaning. Mine is making a flutter sound and then shutting down then coming on. Im almost sure its just dirty and blocked up and maybe needs lubed back up.
Mazda 3 2018 Japan import, when I took out the Blower I noticed my blades dont have a clamp to pull them out 🤔🥺. Any idea how to take the Blades out? I was able to clean them but not like you did. It did help with the noise a bit though
Just an FYI: On my 2016 Mazda CX-3 GT, you don't have to remove the wiring harness at all to clean it. It has enough slack on it to remove the blower for access. Get a lot of animals here in the country and if the car sits too long, I find all sorts of debris inside the blower (which makes it vibrate at high fan settings)
Hi! Why is it important to disconnect the battery before doing this? Is that normally the first thing you do before working with anything attached to wires?
@@bawk2boom its locate behind there somewhere near by the water drain hose & would be abit difficult to replace due to limited area to work on. But it is do able just be patience. You turn the old resistor counterclockwise and press the electrical connection socket and you are all set.
I bought a 2018 CX-5. It had the cigarette smoke masked. It wore off and the cigarette odor was pronounced to say the least. The fan blower cleaning will be another step at the removal of the smoke odor. Thanks Page 2, My 2018 CX-5 blower doesn’t have a spring clip. It has a pressed on fitting. Can’t be easily removed. Mazda must have seen your RUclips video.
Fantastic video! Can you explain/make a quick video how yo disonnect the battery before doing this maintenance on the A/C unit? And then how to reconnect it? Would be really helpful as I can't find proper video online on how to do this on cx-5
@@FelixDanGarasiAuto Thanks, but I cannot find your video where you show how to remove battery connection, can you please provide the link? you only remove negative connection then right? thank you :)
Great video! I think I might do this myself but fans are still blowing strong for now. How long has that dust buildup been before cleaning in the video?
Sore pak felix, untuk blower sudah sy praktekan di mazda 2 sy sesuai arahan pak felix, hasil nya saya temukan kotoran lengket dan sudah sy bersihkan total. Sy mohon info pak kalau letak evap nya dmn ya pak? Kira2 lokasi nya posible untuk kita bersihkan atau tdk. Trimakasih pak felix
Thanks for the new video. I will be doing this project this weekend. Does the CX-5 have any O2 sensors? If so, will you do a video on that? Keep up the good work!
Hi, Thank you for the good video. I have warmer air in the driver side and weaker flow than the passenger side. Is this because of the blend door actuator ? do you have a video describe how to change it?
Unfortunately havent had an issue with mine. But i believe it is located on the AC blower unit. Held by 3 screws. If yoy have full automated AC system theres 2 pcs actuator. One on driver and passenger side.
Thank you for tunin in Mr Slava. Your comment very much appreciated. Please support this channel just by clicking subscribe :) and to get the most of the latest video dont forget to hit that bell too :) thank you.
I had an older vw from the 90s. The fan blower spindle got worn over time due dirt buildup, making funny noises, smells and can from cracks from debris like twigs that accidently get in if u replace cabin air filter. So its better to grease it once in a while instead of replacing rotten, corroded cables, fuses, spindles and u keep looking why it doesnt turn well :) In the mechanics world we learned, every moving part must be greased.
Nice video -- but I thought a cabin filter takes care of dust? Almost seems a bit anal -- unless you have allergies or are trying to eliminate smoke odor.
@@FelixDanGarasiAuto halo, montir barusan cek tp ternyata sekring aman, kabel dll aman. Filter td di cek kotor bgt dan ternyata fan gak nyala. Dicoba lg juga masih ga ada udara yg keluar. Kira2 knp ya? Montir sy gaberani mau cek krn takut full elektrik.
bro felix sorry ganggu mau nanya bro cara diskonek aki mazda nya bagaimana ya? btw saya juga ada dm bro felix di instagram. mohon pencerahannya bro thankyou
Thank you! My fan blower is making noise at the higher fan speeds, which began when I replaced the old filter, which had debris and probably some fell into the fan. I understand this is a fairly common issue.
Thank you for your video! It helped me clean out the fan which was causing noise due to some leaves that got inside. Saved me a trip to the dealer. Thanks again!
no worries glad i can help.
Thank you! I had the cabin air filter replaced on my Mazda 3 and my fan was making noise. I used this video to take the fan out and found a leaf in it. Popped it back in and no more noise!
Cool glad it work out :)
you deserve way more subscriber!! Clear and easy to do task. Best one so far for the Mazda's
@@Silent_boy23 yes please thank you for your time tuning in. Subscribe , Like & Share to the world . ✌🏻✌🏻✌🏻
Thank you! I discovered a whole bunch of acorns and leaves in my fan due to a big hole have been chewed through the cabin air filter. I'll give this a whirl soon as it looks straightforward.
👍👍
I took blower fan out of my CX-5 very easy but I did not have the same clip to detach the fan wheel like it was in your video instead it looks like a piece a plastic wedged in between to clips any idea how to remove plastic clip without breaking. Thanks.
That im not too sure but maybe try pry it off slowly ?? is it like a snap clip sorta ??
Same with mine seems like a fused piece to prevent it from being disassembled
Thank you for the video! Mine had some small piece of rubber and 2 leaves in it but now it’s back to being quiet! It was about to drive me INSANE lol
Fantastic!! glad you found the issue.
Great i was searching videos on blower, i did find how to replace it, which is same steps, but those videos didn't say about cleaning. Mine is making a flutter sound and then shutting down then coming on. Im almost sure its just dirty and blocked up and maybe needs lubed back up.
yes definately can clean the motor and lube it up slightly so it wont make any scratch flutter sound inside the motor. 👍🏼
Mazda 3 2018 Japan import, when I took out the Blower I noticed my blades dont have a clamp to pull them out 🤔🥺. Any idea how to take the Blades out? I was able to clean them but not like you did.
It did help with the noise a bit though
can you snap a photo and send me thru my IG? @ felixdan_
I have the Same problem 😢
Just an FYI: On my 2016 Mazda CX-3 GT, you don't have to remove the wiring harness at all to clean it. It has enough slack on it to remove the blower for access. Get a lot of animals here in the country and if the car sits too long, I find all sorts of debris inside the blower (which makes it vibrate at high fan settings)
Wow make sure you have them clean up. :D
Do I have to remove the glovebox on a 2014 Mazda 6 to access blower motor? Thanks for all your great Mazda videos!
yes have to remove the glovebox to access. 😀
You do the best mazda cx5 videos that I found. Thaks
Appreciated it man. Thank you for your time tuning in. Dont forget to subscribe , like and share :)
Hi! Why is it important to disconnect the battery before doing this? Is that normally the first thing you do before working with anything attached to wires?
to avoid any short circuits.
@@FelixDanGarasiAuto that was fast lol thank you
Hi. Do you think it's a good idea to lubricate the shaft if the blower motor? Excellent video.
sure can do
Hi bro felix can you show which one is the resistor blower, i need to get that part changed diy but not 100% sure which
@@bawk2boom its locate behind there somewhere near by the water drain hose & would be abit difficult to replace due to limited area to work on. But it is do able just be patience. You turn the old resistor counterclockwise and press the electrical connection socket and you are all set.
You must really love your Mazda CX-5 because I’ve never thought of cleaning this, neither did I know where this was hahah I know now.
Hahah yeah , just want to keep it clean.
I bought a 2018 CX-5. It had the cigarette smoke masked. It wore off and the cigarette odor was pronounced to say the least.
The fan blower cleaning will be another step at the removal of the smoke odor.
Thanks
Page 2, My 2018 CX-5 blower doesn’t have a spring clip. It has a pressed on fitting. Can’t be easily removed.
Mazda must have seen your RUclips video.
haha yeah probably they want the newer gen mazda to be service at mazda dealership so they can get more $$.
Fantastic video! Can you explain/make a quick video how yo disonnect the battery before doing this maintenance on the A/C unit? And then how to reconnect it? Would be really helpful as I can't find proper video online on how to do this on cx-5
i have on other video where i show discconect battery prior doing service. Please check it out :)
@@FelixDanGarasiAuto Thanks, but I cannot find your video where you show how to remove battery connection, can you please provide the link? you only remove negative connection then right? thank you :)
@@Guidolino1234 Yes disconnect only the negative terminal is sufficient.
@@FelixDanGarasiAuto thank you Felix, can you show how to safely disconnect the negative terminal? That would be immensely helpful=)
Thanks Alot , Is CX9 same procesure Or its different ?
im not 100% but i would think it should be very similar in design ,i would just check it first.
Great video! I think I might do this myself but fans are still blowing strong for now. How long has that dust buildup been before cleaning in the video?
Sore pak felix, untuk blower sudah sy praktekan di mazda 2 sy sesuai arahan pak felix, hasil nya saya temukan kotoran lengket dan sudah sy bersihkan total.
Sy mohon info pak kalau letak evap nya dmn ya pak? Kira2 lokasi nya posible untuk kita bersihkan atau tdk.
Trimakasih pak felix
Evaps nya letaknya di tengah dashbor aga susah aksesnya. Tapi kalo ad selang vacuum atau selang kecil mungkin bisa di bersihkan.
Thank you for this! Can you do a tutorial for fuel filter replacement?
radu robert is like to see that myself
Can't wait for fuel filter replacement/ cleaning?
Hi Felix, the bottom black cover, just hook on the back only right? As when I take this part out, didn't notice is there any fitting at the back..
yes its just held by a hook type on the back part.
@@FelixDanGarasiAuto ok, Thanks.. I thought I miss out any bracket or clip.. as long as it is not tight fit..
Thanks for the new video. I will be doing this project this weekend. Does the CX-5 have any O2 sensors? If so, will you do a video on that? Keep up the good work!
Welcome sir . Yes , it does have O2 sensors . I will schedule a video for O2 sensor soon. Keep an eye out .
Hello!
Your video the best! I don’t how this cleaner. Thank you so much!
I appreciate that sir :)
Great tutorial, does the steps applicable to mazda 2 skyactiv as well?
Should be very similar design of ac fan blower.
Thank you om, btw kalau bersihin evap dari dalam pernah nggak? Soalnya saya di bengkel ac saya diharuskan bongkar dashboard😅
waduh biasanya sy ke mekanik AC untuk bersihkan evap nya hehehe. Untuk AC saya kurang paham. hehehe
@@FelixDanGarasiAuto dibongkar atau nggak om kalau bersihin evap? apa dibersihin dr dalam?
Hi, Thank you for the good video. I have warmer air in the driver side and weaker flow than the passenger side. Is this because of the blend door actuator ? do you have a video describe how to change it?
Unfortunately havent had an issue with mine. But i believe it is located on the AC blower unit. Held by 3 screws. If yoy have full automated AC system theres 2 pcs actuator. One on driver and passenger side.
I had exactly this, it's low ac refrigerant
you are the best ma dude!
Thank you bro , appreciate it !
Perlu cabut negatif aki kah om?
ya bole di cabut dahulu kabel negatif battery nya.
Felix, thank u for your channel and your videos!
Thank you for tunin in Mr Slava. Your comment very much appreciated. Please support this channel just by clicking subscribe :) and to get the most of the latest video dont forget to hit that bell too :) thank you.
No need to clean up the evaporater?
yes definately needs to clean if you have the tool n cleaner :)
@@FelixDanGarasiAuto Do you have tutorial video of the evap cleansing?
And so why did you do this and what issue did it resolve?
Just want to have the fan blower cleaned out.
@@FelixDanGarasiAuto okay thanks
I had an older vw from the 90s. The fan blower spindle got worn over time due dirt buildup, making funny noises, smells and can from cracks from debris like twigs that accidently get in if u replace cabin air filter. So its better to grease it once in a while instead of replacing rotten, corroded cables, fuses, spindles and u keep looking why it doesnt turn well :) In the mechanics world we learned, every moving part must be greased.
Thank you! I really needed this!
you welcome sir.
Tried this earlier, but when I plugged the harness back in after cleaning, the vehicle wouldn't start. Any ideas? Thanks!
Check your ignition fuse. And did u disconnect the battery prior doing it ?
Спасибо тебе человек.
Hi can you tell me if mazda has an ac cabin and where it is located
Sorry what do you mean by AC cabin? u mean cabin filter ? if so i have video here ruclips.net/video/fZ3ovn9FNCc/видео.htmlsi=zY2ftYVQfGlHtmPr
Nice your tutorial.....Thx Brother
You are welcome
Respectfully, I would have used compressed air on the motor side
mantap bro musti negatif aki dlu ya?
Thank you sam. Tdk musti negatif dlu . Positif dulu jg gpp.
Nice video -- but I thought a cabin filter takes care of dust? Almost seems a bit anal -- unless you have allergies or are trying to eliminate smoke odor.
it does takes care of the dust.
Hi there..my fan blower for mazda 3 2015 didnt working after i clean..do u know what happen?
Hopefully this is the problem for my Mazda 3. My is giving low air pressure and making a rattling noise.
give it a go.
Halo, cx5 saya saat ac dinyalakan itu ‘ngangkat’ tapi kok tdk ada angin/udara keluar sama sekali ya? Tiba tiba aja sih padahal siang habis dipake
Mungkin ad sekring yg putus. Cb di cek lg.
@@FelixDanGarasiAuto siapp thankyouu! Td udh janjian sm montir buat besok. Smoga sekring aja ya. Worst case apa ya? Krn emg sblm nya baik baik aja kok
@@deborahpaul6218 paling itu saja sih. Untuk Worse case nya blower ac motor rusak.
@@FelixDanGarasiAuto sipp, thank youu!
@@FelixDanGarasiAuto halo, montir barusan cek tp ternyata sekring aman, kabel dll aman. Filter td di cek kotor bgt dan ternyata fan gak nyala. Dicoba lg juga masih ga ada udara yg keluar. Kira2 knp ya? Montir sy gaberani mau cek krn takut full elektrik.
My ac on my 2019 cx-5 made funny ticking noise them went out and no air is blown at all can it be this???
yes it might be the blower unit. do you have warranty ???
What year cx5 is this?
First gen 2013.
@@FelixDanGarasiAuto what about 2011 Mazda 3? is it the same?
@@hantu_darat1879 should be similar . but please double check it ...
I have the cx3 aircon only working on drivers side .passanger side has warm air .Any suggestions?
Dual climate control setting ?
@@FelixDanGarasiAuto It only has one setting cant adjust for each person.
@@MrHsv123 possibly need to recharged the ac system.
@@FelixDanGarasiAuto Strange for a newish car.Thanks for your help.Much appreciated.
@@MrHsv123 double check the controller make sure its on re-circulate position.
That blower dn have filter?
Its got a filter. Please see how to change cabin air filter on this channel. Thank you.
So it's the same with mazda 3?
Yeap similar.
Itu buat Mazda 2 Skyactiv juga disitu ya om?
Iya bro seharus nya sama lokasi fan blowernya.
Hi, is this the same in Mazda 3 2014? Thanks
should be very similar.
Did you ever find out? I think the mazda 3 blower motors are behind the dash vs the CX5 which hangs below the glove box.
@@cobramanphil you will have to remove the glovebox assembly. But the design should be similar.
Mazda 3 ac blower is quite difficult to access.
bro felix sorry ganggu mau nanya bro cara diskonek aki mazda nya bagaimana ya? btw saya juga ada dm bro felix di instagram. mohon pencerahannya bro thankyou
I thing u have to disconnect battery first
Ya i have done that , apologize i forgot to mentioned it.
Donde sé encuentra la resistencia del blower motor?
Totally wrong for Mazda 2, don’t know why you included it in the title.
should b a very similar design & ways to remove. But wont be 100% exact though.
Di mna letak fan blower nya Om??
bagian penumpang, dibawah laci kabin.
@@FelixDanGarasiAuto oke thx Om