@@ahmadansari2547 हीट तो नहीं होता है, मे लगातार काम नहीं करता कि चार्जर फटे जब मुझे टाका लगाना होता है तो मे इसे जभी ही ओन करता हु फिर काम होते ही तुरंत बंद कर देता हूँ
Hey Bro! It will not work more than 3 to 4 days bcoz the pencil lead is made up of Graphite, by passing electric current through it, it will be Oxidized and then lead will be broken.
Its not the electricity that causes it to oxidize. Its the heat. At the temperature needed to be used as a soldering iron, youre basically burning the graphite.
@@joemann7971 But graphite is heating due to the electricity and at an Overcharge Graphite becomes weaken and easily get in Contact with the atmospheric Oxygen and get Oxidized. With such an Oxidization Graphite lead broke into pieces.
@@DJ-dy3ug thats true but the electricity itself isn't causing the damage directly. Graphite and carbon resistors are more or less the same thing. But if you get a 1 watt resistor and run 10 watts of power through it, you'll end up with a similar situation. What he's doing in this video is basically making a DYI resistor from graphite and overheating the crap out of it to make it melt solder.
(Please resond!) I have 2 questions.. 1st question is, does the type of pencil used matter? And the 2nd question is, do you HAVE to cut the extra wires off from the charger when u tied them together with the copper wires from the pencil tip?
Bro, Is it safe to try for the beginners at home? Why Negative (-) and Positive (+) don't mix together as Pencil lead is a conductor of Electricity? Please reply as soon as possible!
Yo te digo es seguro no te explotara en la cara jeje ya que + y - no se están tocando entre si si se tocan el grafito comenzará a aser un pequeño corto circuito pero leve mientras nosé toquen todo bien
muito bom, gostei muito pela incrivel iem angola precisamos de ideias como essas para o nosso desenvouvimento e nao so tambem nos leva em lugares em que nunca sonhamos chegar la, muito obrigado pela incrivel ideia.
Buen día señor XTRADRanger muy buen vídeo e instructivo. ¿será posible hacerlo con un transformador que la salida, (OUTPUT), sea de menos de 12V? Gracias.
@Sameer Anand wo kaha se de sakte hai??? Maine nokia mobile ka charger se current dia Pencil garam ho raha hai lekin grefait se soldering nahi ho raha hai??? Please help me🙏🙏🙏
I tried this with 5v 1.5A charger and it worked well.it heated up within 3 minute and soldered well
Solder wait for hot
Did you use normal phone charger and normal phone charging cables?
Hmm okay hope my home will not blackout
i tried this with 12v motorcycle battery and it turned red hot in 5s
Who came here for reaparing headphones?😅
Me
😂🙈
Me also
Me
mee'
How wonderful! I've learned a lot of tips from the videos on your channel
Hey guys I tried it really and it works 😊😊
Mine exploded
It took a little time to get heated
Sure
It really worked for me. The most easiest way to make soldering iron.
How much time it needs to warm up
Bahi it really work I am happy and I give to my bro this gift
When you don't have money but you wanna give your bro a good gift lol
If your worrying about getting shock just tape the whole pencil except the tip with electric tape 🙂
rytt
Yr right 😇😍😍
An old charger does not produce that much electricity so you don't need to do anything
@@freindlgllama3220 but the wood itself can conduct heating
DC electricity Can't give you any shock 🙄🙄
I had to use 2 different pencils because the lead broke so much but it works so thx!!!!😄
Kitni der me garam hoti h
Ha kitni der me?
Does it work fo real
4:07 electric board of India
BTW thank you
i wouldnt be surprised if i began seeing molecules.
Idiffjfidjfiduif
Right me too😂
Nzz
Gadar film video faltu video
Even atoms too
भाई बना लिया 1 एंपियर एडाप्टर के साथ बहुत बढ़िया काम कर रहा है
Charged fatega nhi bhai
Hit hota hai kya charged
@@ahmadansari2547 हीट तो नहीं होता है, मे लगातार काम नहीं करता कि चार्जर फटे जब मुझे टाका लगाना होता है तो मे इसे जभी ही ओन करता हु फिर काम होते ही तुरंत बंद कर देता हूँ
@@ahmadansari2547 नही फटेगा
Hey I made this soldering iron with 9volt battery so please tell me that the 9volt battery is OK for this soldering iron
When you use battery there is a possibility of short circuit and fire, especially large Amp battery.
Yes
please don't make this fake soldering iron.Just buy a GOOD one!
Tagra soldring iron
fe zn30
Per
@@mythicalboy3600 u could not even efford this to make.. how can u buy?? 😂
Ficou muito bom mesmo❤❤ficou muito bom mesmo
help me, can my adapter be used? it says 100-240vac,50/60hz 150 mA,5.0VDC=500mA.
It doesn't work
@@atommodel yea it heats up but doesn't solder.
Will it work with 5 V and 1 A charger??
No
De cuanto es el cargador para que trabaje bien como en el video.
Hi watch this CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE ruclips.net/video/DMYn_0uTVB8/видео.html
@@alejandrogrumas498
~
$ 1🌽🌽🌽🌽🌽🌽🌽🌽🌽
Very nice my complete this work 👌🙂
I bet this man will try to make a plane out of a paper bag next 💀
Hey Bro!
It will not work more than 3 to 4 days
bcoz the pencil lead is made up of Graphite, by passing electric current through it, it will be Oxidized and then lead will be broken.
Yes. It is only for temporary use
Bro decrease the distance between these wires, it will start heating
Its not the electricity that causes it to oxidize. Its the heat. At the temperature needed to be used as a soldering iron, youre basically burning the graphite.
@@joemann7971 But graphite is heating due to the electricity and at an Overcharge Graphite becomes weaken and easily get in Contact with the atmospheric Oxygen and get Oxidized. With such an Oxidization Graphite lead broke into pieces.
@@DJ-dy3ug thats true but the electricity itself isn't causing the damage directly. Graphite and carbon resistors are more or less the same thing. But if you get a 1 watt resistor and run 10 watts of power through it, you'll end up with a similar situation.
What he's doing in this video is basically making a DYI resistor from graphite
and overheating the crap out of it to make it melt solder.
Camera me ghusa do pencil
Edit: thanks for so much likes for first time
Bhai thodi dur se recording kr liya kro
😂😂
😂😂😂
Ajjubhai free fire
😆😆😆😆😅😅😅
The Thumbnail Is Very Addictive For Me
I want To Repair My Wired Earphones 😅
Its Agust 2024😶
Good
It is not working... Even with 18.5 v charger.. please tell me what to do
Can't I not use adapter and straight away join the wire on my switch board....
Ok🧐🧐🧐🧐🧐🧐🧐🧐🧐🧐
Which adaptor sir?
Pls tell low cost adaptor or if I directly plug in the wires to socket (jugaad) then it will shock or not
Use ya brain start small eg 5v 500ma and don't be dumb and wire it to mains you will have a fire 🔥
Maybe start with battery's first
Flammable material and high temperature, sounds like a great idea
Shut up nerd
will it work without copper? and just use a wire?
Bhai free fire khelte ho
@@technicalnihar4605 yes i play free fire
Alok he kya
@@technicalnihar4605 do you play ff?
I play
Bhai kuch alag adapter se Nehi hoga kya
Can we not use alluminium instead of copper
Can I use mobile charger instead of adaptor
It won't work
I see many videos they use mobile charger instead of adaptor
Is take to long to the soldering hot?
25-30 minits
Gone mad of your channel 😍😘
Do we need to use only 12v adapter?
it works better
Can we use 7.5 V
I mean 5.7V
@@shubhkarn2211 do eunogh 4.75v??
I have used a usb adapter which has four wires, red, black, white , green,
How should I connect it?
Check voltages and find + ve
i can use 12v inserted for 9v ???
Very nice use full
St. McGyver will be proud of you!
I am Japanese.Your video is great
Thank you 😊
Bien explicado lo felicito desde managua nicaragua
Can you repeat in english please
Bhai 5 v ka charger ha ky ker plz bta reply?
Thank you bro...for exploding my adapter
LMAOOOOO 😂
Can i use output-5v ,750 mA
No
Ficou muito bom mesmo 👏👏👏👍
Why cut the tip, wouldn't it be better
with it being pointy?
This is what it should be.
This beautiful bearded kid will be able to time travel with technology.
ස්තුතියි
Wahala for who no get better soldering iron😂but nice one
,🎂
mera soldering kam kar raha hai bhai thanx❤️😘😘
Thanks
(Please resond!)
I have 2 questions..
1st question is, does the type of pencil used matter?
And the 2nd question is, do you HAVE to cut the extra wires off from the charger when u tied them together with the copper wires from the pencil tip?
Nataraj pencil, because the quality of graphite lead used in it works better. Cutting short length of the wire is your choice.
@@Xtra-range 👍🏽 thanks!
Good bro keep it up
Bro, Is it safe to try for the beginners at home? Why Negative (-) and Positive (+) don't mix together as Pencil lead is a conductor
of Electricity? Please reply as soon as possible!
10 monthas later...😂
50000 years later😂
100000000000year later
Yo te digo es seguro no te explotara en la cara jeje ya que + y - no se están tocando entre si si se tocan el grafito comenzará a aser un pequeño corto circuito pero leve mientras nosé toquen todo bien
1 year later
Not fake. Excellent work!
Thanks🌹 bhai your idea is hundred💯 present work
Thank you!!
Can I use any wire on pencil
All non metal does not conduct electricity expect graphite logic sahi hai yaar
😎😎😎👍
nice zoom👍
Nataraj company after watching this : meri shaktiyo ka galat istemaal hua h maa 😂😂😂
Sar ise aap kitne volt ke charger se hit Karte Hain?
Can you repeat in english please
I do this but it is not working
samrudha golpakr
Same
It's patched
Sala chitiya banata hai
You mean did?
how much time will it take to melt the wire
almost immediatly
without pencil🙆♂️👍
Does it work really wire is not getting heat
Bro are you stupid? That's a direct short circuit the power supply will blast
MADE IN INDIA 🇮🇳 🇮🇳 🇮🇳 🇮🇳 🇮🇳
Made in China ha charger china bc ha
muito bom, gostei muito pela incrivel iem angola precisamos de ideias como essas para o nosso desenvouvimento e nao so tambem nos leva em lugares em que nunca sonhamos chegar la, muito obrigado pela incrivel ideia.
Bro will you please say me what materials you used to make soldering iron
Hi
Best Idea only ₹ 5
How you know positive and negative wire?
Now that's a real Pinecil.
No
If then you try
@@harisharis2124 What in the hell are you talking about?
इस तरह से soldring wire पिंगल तो सकता है परन्तु soldring सही नहीं होती है ।
Tried using even a 22v battery, but it just does not heat up enough to melt the soldering metal. Any help?
Here i used 12v 2amp dc adapter
@@Xtra-range Thanks. Just gave up and borrowed one from my neighbor
How to use it in circuit
Nice 👍👍👍👍👍👍👍👍
Nais trik you are intelligent 🙌🙌👍👍👍
Buen día señor XTRADRanger muy buen vídeo e instructivo. ¿será posible hacerlo con un transformador que la salida, (OUTPUT), sea de menos de 12V? Gracias.
Can we use charger also
Kya hum isme koi sa bhi charger laga sakte ha
Pls repreat in english
Can we connect it directly to the switch board which we use for home appliances
It is a 12v dc adapter
No Bose, because ac is dangerous in less voltage also that's y using DC supply from adapter
sudhakar reddy
If you want to trip your breaker try it!
Switching Sdapter Model:Dsc-12 FEU 120050
Input:100-240V-50/60Hz 0.2A
Output:+12-_0.5A
Vai eta diye hoybo ni......?
Can we use 6.5A adapter please reply
Can we use 2.5A adapter
here i used 5v, 2 amp. more amp may result catching in fire, so don't try it.
Soldering iron uses in construction?
Bhai 12v ka charger to nhi h mobile charger h 5v ka usse kaam hoga kya🙄🤔
Bhai mene to 5-5 volt ke 2 charger lga diye fir bhi melt nhi hua..
@@SKSTAR2b sahi kha 😒faltu lgg rha h yeh sb...mera solding garam to ho rha h pr melt nhi ho rha h🤦😔
Will this affect the adaptor
Who else just breaks the tip of pencil
Now they will not break the lead of pencil
😂
Go watch this CREATE SHADES USING SIERPINSKI'S TRIANGLE AND YOU SMART PHONE ruclips.net/video/DMYn_0uTVB8/видео.html
Thank you 🤓🤓
Bro ee krn nal adapter nu nai kuj hunda 🤔 mere kol ik hi adapter aa
Can you repeat in english please
@@Xtra-range it's harm Or not for my phone adapter? bcz my usb cable is so heat when I on the switch I have only one adapter
It is real video
🤔🤔🤔🤔🤔🤔🤔🤔
Thank you
no it isn't please don't try this...
Really he is working
Wih sangat mantap buat solder dari pengsil
Bhai ya short circuit toh nahi ho gayegi
सोल्डरिंग करने की मशीन कितने रुपए में मिलती है
Can you repeat in english please
Bhai aapne pencil nip mein konsa wire lagaya hai binding wire hai kya
Can you repeat in english please
Bro decrease the distance between these wires, it will start heating
Nahi huva mera
Pencil heat ho gai lekin kuchh soldering nahi ho raha hai????
Kya kare please reply me as soon as possible🤗🤗🤗
@Sameer Anand wo kaha se de sakte hai???
Maine nokia mobile ka charger se current dia
Pencil garam ho raha hai lekin grefait se soldering nahi ho raha hai???
Please help me🙏🙏🙏
@Sameer Anand ha
Pencil heat ho rha hai
Lekin soldier nahi ho raha hai
Main solding iorn banaye not working 😥 ,,,, yeh kaise work kregi please please jvav tho
Sahi kaha Bhai
I will make this. It is working good but it will not start heating.Now what can I do? Please tell me.
Watch video again carefully
I will use 12v 2.0A ac/dc adapter
It can't melt the tin bro plzz tell me that Bro
Bhai Naya khareed le kam aye ga
Bro is common..call him something else
Bhai bulb ke upar wala ko pighalao pighal jayega or wire kharido special hota hai
I did try it but mine got so hot that it started glowing red and then my entire room smelled like burned wood lol 😂
😆
Voltage too high
What is the white metal which is heating with soldering iron
Solder lead
can i use cable to connect
It's working Awesome
Worked trik good luck
12 volt 2 amps= 24 watts....i got 5g phone charger hack..5 volt at 3amp =15 watts ...will it work?
Fantastic 🤗🤗🤗🤗🤗
Thank you
is it necessary to use a 12v and 2.0a charger?
9v also works
Do not try this if you are not familiar with electricity
Can I use lesser output adapter? Like 5V, 2A?
9/12 v works better
Thanks for this idea