Di box, pedal or another amp with a Di. Outlets have a frequency that abuse your speaker. Really depends on the instrument. But short answer is you need a Di.
Awesome video! Just one question; I’m wondering if one of the 18 inch sub can carry a good space (100-200 people) with 2 tops. Anyone have the new one to give some feedback?
Hello, Matthew! It really depends on what the application is. If it’s just like wedding reception DJ stuff - sure, a single 18 might be enough for people on the dance floor to feel a little low end (I’d probably still opt for using 2 of those subs, though). If it’s a live band situation, then you’d definitely want more low end. If you’re trying to give the crowd a concert level experience, you’ll need a ton more low end and head room for your mains. Anything outdoors is going to require a ton more. I play in a couple rock cover bands, and when we play outdoors we bring 2 dual 18” subs (2 x SRX828SP), and 4 12” line arrays (4 x VRX932LAP), and sometimes that's still not enough. Low end disperses quickly outside, so when playing outside you usually need to double what you’d use for same size crowd and band indoors. Thanks for the interest! Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
Thanks for the info; I don't have a big budget to spend on multiple subs, since I am part of a small band. Would I be fine if I can only buy one right now, and as I expand the band I expand the speakers? I just want to know how far the 18 inch might thow, with a 2.1 system. I am looking to get a powerful system, but as I stand I can only afford 1 right now. Would I be ok?
In additon, my tops are quite good with the low end, as the venue we did a couple of weeks ago proved a good range of coverage; obviously the sub would increase my bass reponse, since tops are not meant as subs.
Hey, Jeff! It really depends on your current setup. Essentially, flipping the phase, or polarity, of the subwoofer will flip that polarity 180 degrees. Depending on where your speakers are located in the room, flipping the phase could help get a better low end frequency response. Check out the link below with some more information on that, as well: hometheateracademy.com/subwoofer-phase-be-normal-or-reverse/ I hope this helps! Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
Hello, Jeff! It depends on the style of music and how loud the guitar/bass amps and drums are on stage. For a club of that size and a rock band that isn’t too loud, then those speakers would work fine. I have a very loud 80s hair metal band, and I usually bring a JBL dual 18” sub and either two 12” or 15” powered tops that are all a fair bit more powerful than the Mackie Thump series. Thanks for the interest! Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
@@digitaldeceptionsthe sub will outrun the thump go’s and you’ll wish you have more speaker if you’re like me😂 the max spl of subs vs speakers is pretty huge in term of db
Hi Lee, great question! The ‘Thru’ output on the speaker outputs the mix from the input channels, so yes, it can take the Bluetooth signal down to the sub. This should work OK, but you will not be getting the proper crossover that the sub would provide to the speaker, so the lows, while loud, may be a little less precise. If you want to dig in further, give me a ring! Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
They are really awesome looking! If any audio knowledge proficient person can answer this question for me, that would be very helpful. I have one of these speakers, the 18 inch. The only way I can seem to get a loud enough output, say, for a live setting, is basically running the signal chain as follows: audio source, channel on mixer, output, preamp, input on speaker. Don’t know if it’s bad for the speaker to run a hot signal into the input. If I were to just run a signal from the output of the mixer into the speaker, I have to turn up the volume to the max to get it to sound loud enough. Anyone got any ideas? Thanks!
Do some research on gain structure to make sure your system is set up properly. The signal is probably weak at one or more points in the structure which you are compensating for with the preamp. It's hard to say exactly without being able to see your setup.
Hello, pablojimenezromero! It has a built in crossover with multiple presets. Give us a shout and we can discuss in more depth! Thanks for the interest! James Masterson, Sweetwater Sales Engineer, (800) 222-4700 ext. 1641, james_masterson@sweetwater.com
Hello, Jeff! RMS would be roughly 900 watts. The more important spec is the max SPL, though, which is 132 dB. Thanks for the interest! Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
@@sweetwater The SPL is not always the determining factor cause many companies lie about their specs , the only way to test it’s power is to borrow a powerful sub like an RCF and compare it , I always look at the limiter light that’s how I know if it’s powerful or not.
I wish manufacturers would be held to an honest standard of rating the power of their speakers. There's no way in the world. These are 1400 W on the output. It wouldn't even be 1400 W peak based on what I've seen of the amplifier and power supply that 1400 W is the total power consumption of the system at its max. The speaker output couldn't be more than two hundred watts RMS at best. I feel it is false advertising to label these 1400 W speakers.And there's no way in the world that can even come close.The components on the power supply and amplifier could never support 1400 watts on the speaker output
Bring the boom with the Mackie Thump series subwoofer! Shop it today at Sweetwater 👉 imp.i114863.net/QOQZ96
There’s one word for all of the sweet water videos, cool.
Or "sweet"?
I can't help but think I am being sold on some speakers from none other than John Lovitz! 🤘
Di box, pedal or another amp with a Di. Outlets have a frequency that abuse your speaker. Really depends on the instrument. But short answer is you need a Di.
Awesome video! Just one question; I’m wondering if one of the 18 inch sub can carry a good space (100-200 people) with 2 tops. Anyone have the new one to give some feedback?
I’m addition, how would it handle outside
Hello, Matthew! It really depends on what the application is. If it’s just like wedding reception DJ stuff - sure, a single 18 might be enough for people on the dance floor to feel a little low end (I’d probably still opt for using 2 of those subs, though). If it’s a live band situation, then you’d definitely want more low end. If you’re trying to give the crowd a concert level experience, you’ll need a ton more low end and head room for your mains. Anything outdoors is going to require a ton more. I play in a couple rock cover bands, and when we play outdoors we bring 2 dual 18” subs (2 x SRX828SP), and 4 12” line arrays (4 x VRX932LAP), and sometimes that's still not enough. Low end disperses quickly outside, so when playing outside you usually need to double what you’d use for same size crowd and band indoors.
Thanks for the interest!
Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
Thanks for the info; I don't have a big budget to spend on multiple subs, since I am part of a small band. Would I be fine if I can only buy one right now, and as I expand the band I expand the speakers? I just want to know how far the 18 inch might thow, with a 2.1 system. I am looking to get a powerful system, but as I stand I can only afford 1 right now. Would I be ok?
In additon, my tops are quite good with the low end, as the venue we did a couple of weeks ago proved a good range of coverage; obviously the sub would increase my bass reponse, since tops are not meant as subs.
Am thinking these be real 700w not sure about driver as so hard to find out i know most say spl but hmmm weight looks so tempting
Should the Phase option be on Normal or Invert? What’s the difference?
Hey, Jeff! It really depends on your current setup. Essentially, flipping the phase, or polarity, of the subwoofer will flip that polarity 180 degrees. Depending on where your speakers are located in the room, flipping the phase could help get a better low end frequency response. Check out the link below with some more information on that, as well:
hometheateracademy.com/subwoofer-phase-be-normal-or-reverse/
I hope this helps!
Nick Pasquino, Sweetwater Sales Engineer, (800) 222-4700 ext. 3230, nick_pasquino@sweetwater.com
@@sweetwater Cool article & video. Thank you 😄
I play in a band that plays in clubs that usually hold up to 250 people. Would 2 of the 18in. Subs & 2 of the 15XT Loudspeakers be enough?
Hello, Jeff! It depends on the style of music and how loud the guitar/bass amps and drums are on stage. For a club of that size and a rock band that isn’t too loud, then those speakers would work fine. I have a very loud 80s hair metal band, and I usually bring a JBL dual 18” sub and either two 12” or 15” powered tops that are all a fair bit more powerful than the Mackie Thump series.
Thanks for the interest!
Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
@@sweetwater ok thanks 😄
Is the 115s thump sub louder than jbl irx115s?
Mackie is great!
Would this be an overkill for a couple of Thump Go's? I'm missing the low end for small gatherings
I have the same question, got two thump gos need some low end
@@digitaldeceptionsthe sub will outrun the thump go’s and you’ll wish you have more speaker if you’re like me😂
the max spl of subs vs speakers is pretty huge in term of db
can I connect the sub to 215xt and provide an input signal to the sub from the 215xt while paired in BT mode?
Hi Lee, great question! The ‘Thru’ output on the speaker outputs the mix from the input channels, so yes, it can take the Bluetooth signal down to the sub. This should work OK, but you will not be getting the proper crossover that the sub would provide to the speaker, so the lows, while loud, may be a little less precise.
If you want to dig in further, give me a ring!
Drake Sobehrad, Sweetwater Sales Engineer, (800) 222-4700 ext. 3271, drake_sobehrad@sweetwater.com
@@sweetwater ordered the sub, it would not take thru put signal while paired in Bluetooth, had to use a mixer
They are really awesome looking! If any audio knowledge proficient person can answer this question for me, that would be very helpful. I have one of these speakers, the 18 inch. The only way I can seem to get a loud enough output, say, for a live setting, is basically running the signal chain as follows: audio source, channel on mixer, output, preamp, input on speaker. Don’t know if it’s bad for the speaker to run a hot signal into the input. If I were to just run a signal from the output of the mixer into the speaker, I have to turn up the volume to the max to get it to sound loud enough. Anyone got any ideas? Thanks!
Do some research on gain structure to make sure your system is set up properly. The signal is probably weak at one or more points in the structure which you are compensating for with the preamp. It's hard to say exactly without being able to see your setup.
Website says 1400W peak... can someone tell me what the real "Continuous" wattage is?
Thanks
My guess would be about 500.
is it plug and play or do I need a crossover?
Hello, pablojimenezromero! It has a built in crossover with multiple presets. Give us a shout and we can discuss in more depth!
Thanks for the interest!
James Masterson, Sweetwater Sales Engineer, (800) 222-4700 ext. 1641, james_masterson@sweetwater.com
Hope you guys make portable version I don’t have to plug into a wall
I think they have a Thump Go speaker. I think it’s battery powered. Check for yourself to be sure 😄
@@jefizz66 I mean portable subs
@@bboymac84 lol ok sorry. Good luck 😄
Would they work as a house sub for both music n movies
I'm pretty sure these are for large events not home lol
How do you connect a mackie powered PA to a powered sub like this so I can listen to music in my gym via Bluetooth.
do you have an answer to your question as I am in the same predicament?
@@leeopolka604 no unfortunately not
@@clintonbruning ok thanks
Are these 700w rms output to the driver & guessing a 600/700w driver?
1,400 for the 15 inch
What is the RMS on the 18?
Hello, Jeff! RMS would be roughly 900 watts. The more important spec is the max SPL, though, which is 132 dB.
Thanks for the interest!
Spunde, Sweetwater Sales Engineer, (800) 222-4700 ext. 1732, Spunde@Sweetwater.com
@@sweetwater ok cool thank you.
@@sweetwater The SPL is not always the determining factor cause many companies lie about their specs , the only way to test it’s power is to borrow a powerful sub like an RCF and compare it , I always look at the limiter light that’s how I know if it’s powerful or not.
Now I could use a pair of these in my face
I wish manufacturers would be held to an honest standard of rating the power of their speakers. There's no way in the world. These are 1400 W on the output. It wouldn't even be 1400 W peak based on what I've seen of the amplifier and power supply that 1400 W is the total power consumption of the system at its max. The speaker output couldn't be more than two hundred watts RMS at best. I feel it is false advertising to label these 1400 W speakers.And there's no way in the world that can even come close.The components on the power supply and amplifier could never support 1400 watts on the speaker output
Could you suggest any company that stays true to their labeling of out put wattage?? thanks
@@puraskritgurung5672non or them. That’s for sure.
Someone threw out a JBL subwoofer. I plan to make it my bass amp.
😐 just threw it out!!! Holy eh, I would be on that too!!!
A Venue work for purchase 2 of the 18s and no. There is not punch at all. Maybe for a living room or small venues
What?😂😂😂
@Yolchie lol exactly 😂😭😭
Oh no😂
If you want to feel the bass, don’t buy these. They are trash.
not so much for road ready.....no wheels.....lol