Perfect tire for the Tundra, only downside is the weight. But 295/70-18 is proportional to the size of the truck, it actually looks right. Anything smaller looks odd to me.
Looking sharp brother man! No rubbing full lock turn, turn? Thinking about doing KM3s myself but not sure if it would work without issue specifically ling term. Good job!
Looks good, but I’m my opinion crowded.. I have same truck with Westcott pre collar lift with 295 70 18 Falken Wildpeak at3w To me that’s the perfect see up
Looks sick man. I got a 19' TRD Pro and am in need of new tires. They dont make KO2's in 295/70/18 anymore so thinking of going with the KM3's but worried about rubbing. After taking off that front mud flap do you have issues with rubbing?
I have the same truck an I want to go to that tire size. Do that bigger tire make the truck sit up a little higher? An you have no rubbing problems on the inside of the tire? Your truck is fly looks really good man
Any reason why u did put 285/75r18? Would those clear? I have a 21 tundra trail edition with a 3/2 ready lift on stock wheels and i’m looking to upgrade my tires what size do u recommend for me without rubbing. I’m torn between 275/70r18 or 285/75r18 any recommendations?
@@Deltadawg660 I've got a 3/1 lift and can't decide if I want to 275/70 or 295/70. I'm pretty sure I can go 295 with some plastic molding/trimming, but I can get a SL 275 Grabber ATX that's only 46 lbs and save a ton on gas. How did the Kenda's balance? I've seen reviews of them not standing behind the product when customer's get bad ones.
There is another video out there with a guy with a tundra pro and he shows there is like a 1/2” of clearance on the top inside of the tire. Very close.
Do they rub at full lock? I saw another video of a guy with TRD PRO that was hitting the lower sway bar at full lock and he went back to 275/70. I've got a 3/1 lift with +25 offset wheels that help push the tire out and am trying to figure out if I can fit these.
@@tundrariderr8282 I don't off road, either. I think I'm going to try and fit them. What are you getting for MPG? I'm getting about 15 with 285/65 but I drive like a grandpa.
KM3s are wonderful not a loud tire noise comment below for any additional questions
Will the aforementioned fit on a 2021 Toyota Sequoia TRD Pro?
Perfect tire for the Tundra, only downside is the weight. But 295/70-18 is proportional to the size of the truck, it actually looks right. Anything smaller looks odd to me.
Such a clean tire and truck. I’ve always had great luck with AT KO’s. You may have helped convince me to jump over to the KM3. Thanks for sharing bud.
No prob tires are well worth it with the tech these days MTS are quite
These are km3 bf goodrich tires looks sexy i got ko2 on 275/70r18 definitely gonna get these on 295 😅🎉❤
Brah thanks for the video I’m about to do mine 2morrow I’ll try send a pic
Looking sharp brother man! No rubbing full lock turn, turn? Thinking about doing KM3s myself but not sure if it would work without issue specifically ling term. Good job!
Looks good, but I’m my opinion crowded.. I have same truck with Westcott pre collar lift with 295 70 18
Falken Wildpeak at3w
To me that’s the perfect see up
I’ve got 2019 TRD Pro. How is the ride? No rush bring in locked turns?
Looks sick man. I got a 19' TRD Pro and am in need of new tires. They dont make KO2's in 295/70/18 anymore so thinking of going with the KM3's but worried about rubbing. After taking off that front mud flap do you have issues with rubbing?
I have the same truck an I want to go to that tire size.
Do that bigger tire make the truck sit up a little higher? An you have no rubbing problems on the inside of the tire? Your truck is fly looks really good man
Any reason why u did put 285/75r18? Would those clear? I have a 21 tundra trail edition with a 3/2 ready lift on stock wheels and i’m looking to upgrade my tires what size do u recommend for me without rubbing. I’m torn between 275/70r18 or 285/75r18 any recommendations?
Were you get those fender flairs ? Those are clean
Came stock on the tundra when I purchased
How close are they to the upper control arms
You said it comes with a factory 2" lift....do you think it needs that lift to install these?
Regards
Sorry for late response I’m not sure I did have to remove mud flaps
It does. Check out the Tundra forums. Stock ride height you can go 275/70/18 which is roughly 33"
So I ended up putting some kenda klever 275/70r18s. I have a SR5 with no lift, no level, and left the mud flaps. It’s close but no rubbing at all.
@@Deltadawg660 I've got a 3/1 lift and can't decide if I want to 275/70 or 295/70. I'm pretty sure I can go 295 with some plastic molding/trimming, but I can get a SL 275 Grabber ATX that's only 46 lbs and save a ton on gas. How did the Kenda's balance? I've seen reviews of them not standing behind the product when customer's get bad ones.
There is another video out there with a guy with a tundra pro and he shows there is like a 1/2” of clearance on the top inside of the tire. Very close.
Did your milage go down and how much ?
Do you have a lift on this truck
Do they rub at full lock? I saw another video of a guy with TRD PRO that was hitting the lower sway bar at full lock and he went back to 275/70. I've got a 3/1 lift with +25 offset wheels that help push the tire out and am trying to figure out if I can fit these.
I drive daily no rub haven’t did any off road
@@tundrariderr8282 I don't off road, either. I think I'm going to try and fit them. What are you getting for MPG? I'm getting about 15 with 285/65 but I drive like a grandpa.
I’m gettin nice gad mileage depending on my foot I also have the paragon cover on my bed to help as well as the TRD Intake
Did your milage go down compared to the KO2's ?
Not at all no big difference