@@kikunomaru yessss for real actually I’ve made a couple of adjustments to mine, but I think I’m gonna use that nut upgrade tho jaja I believe going with a 4mm would help and be less tight 🤔 also there are some files for the white plastic piece that you can 3D print and make it more rigid
Arigatō! For the instructional video, got the door knob fixed thanks to these instructions. Next watching Nakamura drift here in Europe against Kalle Rovanperä! Greetings from Finland!
Heya, you didn't mention what mm is the second hex screw inside the peephole at 8:19. Is it still holding on with this solution after 1 year? ありがとう ^_^
I'll get an impact wrench to the screws out. I waa unable to get them out earlier. I'm taking the easier route and buying the entire door handle assembly.
@@kikunomaru Success! Really, I don't think I would have been able to do it with out this video. The hardest part was getting the Key lock, Door handle and bracket all lined up and tightened down just right. Barely any room for your hands in there.
do not, no matter what, add the nut or washer to the rod, in the long run it will cause your door not to open, for me my door was deadlocked for weeks on end and took a force to get the door open.
That was tough, wasn't it? I heard that if use a nut thicker than ５ mm, the door will not open.Although there is no problem with opening and closing so far, but this repair method is risky and not recommended. Thank you for your concern.
@@kikunomaru yes, although still a great video! Helped me out lots for replacing my door handle, it’s just myself and others have had issues after putting the nut in, so just want others to be warned
Thank you very much!
Best and most detailed video I've seen so far.
Now I can fix my stupid doorknob.
You are welcome🤗
If you use a thick nut, the door will not open.
Repair carefully🙏
I'm rooting for you(^^)/
Thank you! Much more descriptive compared to the other videos.
Hello Cole Jernigan
I'm glad you found my video useful😃
Огромное спасибо за ваше видео. Всё понятно, последовательно, отличная работа!👍Еще раз спасибо!
Спасибо, что посмотрели мое видео. Я рад, что мое видео оказалось полезным.
Mi amigo japonés! Muchas gracias por este video, me ayudo mucho. Enserio, muchas gracias.
Saludos desde Guatemala :)
♥
Hola Eseman
Gracias por ver el video.
Me alegro de que haya sido útil.
También estoy en guatemala y tengo un crz jaja que horrible que se arruinen los jaladores de la puerta
Hola Jeff Tucker
Da miedo si la puerta no se abre😱
@@kikunomaru yessss for real actually I’ve made a couple of adjustments to mine, but I think I’m gonna use that nut upgrade tho jaja I believe going with a 4mm would help and be less tight 🤔 also there are some files for the white plastic piece that you can 3D print and make it more rigid
It would be great if parts could be created using 3D printing(^^)/
お疲れ様です。え？え？この動画前に見たような気がするんですけど…と思いながらも見てました（笑）それにしてもいつもわかりやすい説明で本当参考になります。
真崎淳 さま
コメントから「英語版を作ってはどうか」とのアドバイスをいただいたので、今回、英語圏の方が見ると英語のテロップがでる動画を作ってみました。
内容は一度見ていただいたものと同じです。
すみません_(._.)_
Un immense merci pour cette vidéo, une aide inestimable. Merci ami Honda.
Bonjour Rene Klant
Merci d’avoir regardé la vidéo😊J’espère que ma vidéo vous aidera(^^)/
THANK YOU VERY MUCH FOR DOING THIS
Really really I can't thank you enough for doing this
Hello x0x0henessy
Thank you for watching my video.
Thank you. I understand everything you said without any Japanese!
Thank you for watching the video🤗 I hope my videos are useful to you(^^)/
Arigatō! For the instructional video, got the door knob fixed thanks to these instructions. Next watching Nakamura drift here in Europe against Kalle Rovanperä!
Greetings from Finland!
I'm glad that my videos are helpful🤗
Congratulations to Rovanpera on his second win(^^)/
young genius.Lentäväsuomalainen!!
Thanks
I’m glad to help.
Друг японский, спасибо тебе, ты спас мою дверную ручку❤
Я рад, что мое видео было полезным🤗
Тем не менее, это самостоятельный стиль, поэтому, пожалуйста, будьте осторожны при ремонте.
Я болею за вас(^^)/
Heya, you didn't mention what mm is the second hex screw inside the peephole at 8:19.
Is it still holding on with this solution after 1 year?
ありがとう ^_^
I think it was probably 5mm.
I haven't had any problems with it yet.
Thank you.
Thank you.
You are welcome😊
Gracias
Gracias por ver mi video😊
Este método parece hacer que la puerta no se abra si la tuerca es gruesa.
Por favor, tenga cuidado(^^)/
I'll get an impact wrench to the screws out. I waa unable to get them out earlier. I'm taking the easier route and buying the entire door handle assembly.
This repair method is not legitimate.So, I think it is better to replace it with an assembly(^^)/
Domo Arigato
Ouitasimasite（You're welcome）(^^)/
@@kikunomaru Success!
Really, I don't think I would have been able to do it with out this video. The hardest part was getting the Key lock, Door handle and bracket all lined up and tightened down just right. Barely any room for your hands in there.
I'm glad my video was helpful😄
世界中のC主（しーあるじ）にバズる事を祈っております！
mac yossyさま
頂いたアドバイスを実践してみました。
ありがとうございました🤗
「 C主（しーあるじ）」ナイスです👍
do not, no matter what, add the nut or washer to the rod, in the long run it will cause your door not to open, for me my door was deadlocked for weeks on end and took a force to get the door open.
That was tough, wasn't it?
I heard that if use a nut thicker than ５ mm, the door will not open.Although there is no problem with opening and closing so far, but this repair method is risky and not recommended.
Thank you for your concern.
@@kikunomaru yes, although still a great video! Helped me out lots for replacing my door handle, it’s just myself and others have had issues after putting the nut in, so just want others to be warned
I'm glad my video helped you a little.
Thank you for letting us know that nut repairs are risky.
Anybody try this hack
Please do so at your own risk.
@@kikunomaru will do (it will be an expermiment on a car own outright 👍),by the way... what was the liquid you put on the nut?
So that the nut did not fall off during work, I put glue on it. However, the nut should not be fully fastened.