Thanks for that! I bought a JD-08 earlier this year along with the tiny keyboard that goes with it. But also having a JD-800, I found that the keyboard doesn’t do the unit justice as far as tonal range. I also have a Yamaha YC-88 that I was wondering if I could interface it with, so I’ll try this out.
This is how I expected it would work, but for some reason it's only allowing me to use the ribbon controller and not responding at all to an external midi controller routed into it normally
Is it set to midi channel 1? (in case you didn’t know, hold press Manuel and press number 2 for midi channel select... the number /button flashing will be the current channel it’s set to, so press channel one as this is the default channel.)
So what do you do if you want to connect the Roland to the average controller, say a Samson 32, which does not have MIDI sockets but only USB-Midi? Please tell me it is possible!!
does your external MIDI controller need wall power to control the Boutique? Testing this out, I couldn't get the boutique to work unless I powered the MIDI keyboard with an adapter?? I'm curious cause the adapter I used I just found to test out but don't want to use this setup since its not a manufacture approved power supply
I have 2 questions, mate, is that black jack 1/8 audio output jack? and is boutique working with battery power in this video? as I can't see any other cables connected.
Please help me please, I just want the boutique for its pitch/mod wheel feature. I'd like to know if I can just use the modulation/pitch slider from the boutique to control my piano that doesn't have a pitch/mod wheel. Using the Out midi from boutique to the In midi on my piano.if it works, would it mess up my 192 polyphony on my piano ? :/ Thank u kind sir
Is there a way to run a Roland Boutique Module from an External MIDI Keyboard, but also use the K-25m to run an external module (other than the one it's ribboned up to? I have a VP-03 that with the Vocoder, Choir or Strings might want to use full chords on a 49-61 Note Keyboard on. I also own a Volca FM and Volca Bass (actually it does a usable Monophonic Lead as well as Bass) that could be sufficiently played on the K-25m. Could this be done by way of using a Local Off (I don't know if it has this capabilitiy) on the K-25m and selecting different MIDI channels?
when i plug mines in i get a very low range steady pulse like sound. i have all 3 synths and this happens for each. i am using the Novation SL-MKii 48. Is anyone else experiencing this as well? HELP!
yea I got that weird crackling sound when I first powered on my JU 06. I made sure the midi channel was corresponding to my controller and the noise was gone. I know that sound is the type of sound you hear if you plug a midi out to a midi out so pretty sure its a midi based issue. hope that helps.
Great video! Can you tell me how to do this but with a Roland Juno DS61? I want to use a keytar style midi controller and use it to trigger the vocoder inside the Juno DS61. How can I do this?
If I was to get 2-3 of the roland Boutique Synths, how would I go about hooking all of them up to my Midi controller? does it just go midi in of one to the midi out of the next and so on and the last one being my controller?
this is a total noob question but do I need to use a computer/daw to use the boutique through a midi controller or can I just plug it straight in through the midi cable? (I use a roland rd-64 and would rather not bring a laptop to use the boutiques live, thanks!)
Andre you can plug the boutique into the midi controller and use the boutique synth as a sound module, playing its sounds from the midi controller,Roland actually sells a small mini keyboard for the boutique synths for $99
what if i want the audio to come from my computer's speaker, after connecting my boutique and midi controller with a midi cable, what should i do next? thank you.
I'm going to find the answer to this with a quick phone call to my music store which is: "Does it really matter there is only one audio output?" In other words you can't use balanced TRS stereo audio cables we only have one unbalanced Mono audio for the entire Roland Boutique range.
I can't believe you seriously needed a whole video to explain that to use a controller keyboard with a synth module you need to connect the midi out from the keyboard to the midi in of the module. Seriously? Just how thick do you think people are?
Richard, I'm going to guess that you're probably closer to my age and likely that you understand these things. Nowadays we've got newer generations that don't read and also don't seem to have that natural ability to figure things out. Everything has to be explained to them which is why they need smart phones. They let their phones do the thinking for them. It used to be that you just figure it out. They can't help it.
This is exactly what I wanted to see. I want to get a JD-08 and a Lucina so this video is perfect for me. Thank you 😎👍
How do you connect it to mixer ? I am trying to figure out how to connect my Emu E5000 Ultra and D-110 Sound Module ? Please help
Thanks for that!
I bought a JD-08 earlier this year along with the tiny keyboard that goes with it. But also having a JD-800, I found that the keyboard doesn’t do the unit justice as far as tonal range. I also have a Yamaha YC-88 that I was wondering if I could interface it with, so I’ll try this out.
Wow so much information in just few minutes this is cool!
Excuse me, where does the sound come from? Is the Keytar connected to the computer? Via USB? Thank you for your video.
Please help! I am trying to use an AKAI MPK MIDI Keyboard with a Roland VP-03 Vocoder, and cannot figure out how to get the sound to work.
Same problem, ever figure it out?
My midi keyboard has only a midi-Usb but no midi in and out. I guess I have to buy a new keyboard or is there any other way?
I have the same question
So what do you do when you plug the midi keyboard in and it doesn't work straight away???????
Do you find the connector to the K25-m hard to input? I've been trying for a LONG time to get it to properly connect....any tricks?
This is how I expected it would work, but for some reason it's only allowing me to use the ribbon controller and not responding at all to an external midi controller routed into it normally
Is it set to midi channel 1? (in case you didn’t know, hold press Manuel and press number 2 for midi channel select... the number /button flashing will be the current channel it’s set to, so press channel one as this is the default channel.)
Yes that was it lol
So what do you do if you want to connect the Roland to the average controller, say a Samson 32, which does not have MIDI sockets but only USB-Midi?
Please tell me it is possible!!
You need a MIDI hub host just like this one -> miditech.de/userfiles/manuals/USB_Midi_Host_DEU_ENG_230717.pdf
does your external MIDI controller need wall power to control the Boutique? Testing this out, I couldn't get the boutique to work unless I powered the MIDI keyboard with an adapter??
I'm curious cause the adapter I used I just found to test out but don't want to use this setup since its not a manufacture approved power supply
Could you please make a video of how to shut off the JX3P?
I have 2 questions, mate, is that black jack 1/8 audio output jack? and is boutique working with battery power in this video? as I can't see any other cables connected.
How to connect external midi keyboard and external drummachine ?
Please help me please, I just want the boutique for its pitch/mod wheel feature. I'd like to know if I can just use the modulation/pitch slider from the boutique to control my piano that doesn't have a pitch/mod wheel. Using the Out midi from boutique to the In midi on my piano.if it works, would it mess up my 192 polyphony on my piano ? :/ Thank u kind sir
Are those 3.5mm audio outputs?
Is there a way to run a Roland Boutique Module from an External MIDI Keyboard, but also use the K-25m to run an external module (other than the one it's ribboned up to?
I have a VP-03 that with the Vocoder, Choir or Strings might want to use full chords on a 49-61 Note Keyboard on.
I also own a Volca FM and Volca Bass (actually it does a usable Monophonic Lead as well as Bass) that could be sufficiently played on the K-25m.
Could this be done by way of using a Local Off (I don't know if it has this capabilitiy) on the K-25m and selecting different MIDI channels?
Can i use JP-08 with an iRig Keys. Do i need a USB to MIDI cable?
when i plug mines in i get a very low range steady pulse like sound. i have all 3 synths and this happens for each. i am using the Novation SL-MKii 48. Is anyone else experiencing this as well? HELP!
Hi did you ever get to the bottom of this as i have the same with the D-05 using a nectar panorama as controller
yea I got that weird crackling sound when I first powered on my JU 06. I made sure the midi channel was corresponding to my controller and the noise was gone. I know that sound is the type of sound you hear if you plug a midi out to a midi out so pretty sure its a midi based issue. hope that helps.
Great video! Can you tell me how to do this but with a Roland Juno DS61? I want to use a keytar style midi controller and use it to trigger the vocoder inside the Juno DS61. How can I do this?
Hi - did you find out how to do this? I'd like to connect a simple Midi keyboard to my DS88. Thanks
If I was to get 2-3 of the roland Boutique Synths, how would I go about hooking all of them up to my Midi controller? does it just go midi in of one to the midi out of the next and so on and the last one being my controller?
There's no need to select some "MIDI channel"?
this is a total noob question but do I need to use a computer/daw to use the boutique through a midi controller or can I just plug it straight in through the midi cable? (I use a roland rd-64 and would rather not bring a laptop to use the boutiques live, thanks!)
Andre you can plug the boutique into the midi controller and use the boutique synth as a sound module, playing its sounds from the midi controller,Roland actually sells a small mini keyboard for the boutique synths for $99
what if i want the audio to come from my computer's speaker, after connecting my boutique and midi controller with a midi cable, what should i do next? thank you.
morning toast I'm not sure exactly, but if you want the sound to come thru computer speaker, it needs to be connected to the computer.
Merry Christmas
Tq for your reply :)
Ok
I'm going to find the answer to this with a quick phone call to my music store which is: "Does it really matter there is only one audio output?" In other words you can't use balanced TRS stereo audio cables we only have one unbalanced Mono audio for the entire Roland Boutique range.
time would of been better spent on showing how to change a midi channel
I can't believe you seriously needed a whole video to explain that to use a controller keyboard with a synth module you need to connect the midi out from the keyboard to the midi in of the module.
Seriously? Just how thick do you think people are?
how do connect multiple hardware synths to one midi keyboard and trigger them when u want
Richard Olpin shut up.
Richard, I'm going to guess that you're probably closer to my age and likely that you understand these things. Nowadays we've got newer generations that don't read and also don't seem to have that natural ability to figure things out. Everything has to be explained to them which is why they need smart phones. They let their phones do the thinking for them. It used to be that you just figure it out. They can't help it.
@@NyakzOTSD you need a midi module
If you’re looking to learn what this says he’s teaching MOVE ON. Nothing to see here.