how to make a series bulb connection
HTML-код
- Опубликовано: 1 сен 2019
- how to make a series bulb connection at home................
↓ 👀 My Other Videos Link 👀 ↓
bulbs connected in parallel • bulbs connected in par...
logo designed By: www logomakr.com
ASD Electrical & Electronics Project's
Dulu77
Nothing like seeing an actual installation! Thank you.
Thanks , nice simple explanation and diagram. Works great for low voltage fans and LED lights.
For a nimrod like myself, this was quite good.
Sir mujhe apne poultry shed me led bulb jalane hai .. Par wahan 3 phase 440 v power ati hai... To sir main 9 watt ki kitni led bulb series me jala sakta hun? Please sir calculation kar k bataye
very informative. you educate me well. thanks a lot
Nice video dear bro
This is the worst way to wire lights. The circuit is in series so the voltage drops across the 4 lights which is why they aren't as bright.
Can you tell me how to light 4 dc filament bulbs with one 12 volt 1.6 amp dc charger. Please.
Rohit V will need bulbs to be rated at 3 volts each.
Klarong klaro ang tutorial mo idol malinaw na malinaw at walang gaanong paandar direct to thepoint❤
I understand I understand something about your chart 😊
Thanks for making the video and uploading it, im smarter now
Thank unso much very informative
Led lights only and I wouldn’t exceed 3. If you use incandescent lights (the old energy eaters) they will be dim.
Hi I have a swirling led chandelier with 16 globes (there not globes shapped like globe with multiple yellow leds and white leds making it tri color) switch off and on changes color, the wiring was undone, and now when I re-wired together, the yellow does not turn on, only white color, i think I might not have put the wiring for yellow in its correct original order. If this is the case I dont remember ther order the squence ran. Is suggestion or help advise?
Very clear about series bulb connection .thank u..
Nit good. Better parallel. If any bulb doesn't work, the whole system fails. And it's difficult to find the ptoblem
Nice video❤❤
How to install a 12v transfo in 6 12v bulbs
But if one bulb blows would this stop the circuit working
I'm trying to lewrn the basics of the electrical trade. What type of wires are those is it just a hot and a neutral how come it doesn't require a ground?
A ground/earth wire is only functional as a protection device as any fault current will travel down the ground wire. Neutral wire provides the return path.
DOUBLE FACE WIRE, DOUBLE NEUTRAL WIRES TO ALL THE HOLDERS?
thanks for educating me
❤
nice to show
what do you called the red and black wire?
simple but incredible THANK YOU 😊
You cannot have music in a classroom while listening or watching. It's not condusive.
You going Back To 18th century Now Going 21th Century
Very good
will LED bulbs connected in series work ?
yes
Thank you!
Baitari charging mai balb series ka use kaise karate hai
Ok ok felicitari
Kirchhoff's voltage rule for series circuits.
Yess
Series connection and parallel connection
Hey bro you only turn on one light 💡 why I think you turn on all🤔
Would be better visually if lights in the room were dimmed.
Verifly retring method and work
Last step I don't understand first bulb Replace on the circuit and then another bulb is connected so how only one bulb is blinking
Series po ba to?
If bulb no 2 is not working or its wiring is faulty, would the following of the bulbs light up? How to solve the problem?
It's work like a system one fall all fall
Yes, one for all, all for one.
How long has this gone for.... BRAD PITT, LEONARDO,, HUGH LAURIE, check the ADS... part GAZA REHAB- MENTAL ILLNESS
IN YOUR VIDEO,ONLY ONE BULP BECAME ON, REMAINING BULPS, HOW TO ALL BULPS ON AT A TIME?
Thankx
Only one light is working no? Why?
helpful thanku
thank you sir
Ok
waste they arent lighting up proper
lol
Why only one bulb light?
others may have highr resistance i suppose
Wrong connection,kaya isa lang iilaw kasi walang supply yong tatlo
TRIED AS PER VIDEO, BUT, ONLY ONE LIGHT ON!!!😁😁👎👎👎👎
You might have made a mistake or connected another terminals together , if you connect in wrong terminals nothings gonna work , for example, take 3 bulbs , then connect the positive terminal of 1st to negative of 2nd , then positive of 2nd to negative of third then positive of third to the live wire.. then connect the negative of 1st to neutral wire in the circuit.. place a switch between the positive of 1st and live wire for convenience 🏪.. this will definitely work 100%
This didnt work for me
Bakit isa lang ang nagkailaw?
Kc 110v lng ...maliit 110v kaya umilaw.
What the fuck was that?
FOLLOWED, BUT, NOT SUCCESS, ONLY ONE BULP BECAME 😀😁👎👎
tumse khd sare chle nhi sale lallu
❤
Ok