The Goonzquad guys truly amaze me. They fearlessly tear into even the most complex automotive systems as if they have done it dozens of times before. Most people would be terrorized when confronted with some of the projects they have undertaken and especially this Senna! I will watch each step of the way.
Even if they fail they will get their money back from RUclips and with extra money and they will get help at some point now let's try if they can do it as they own a shop with no RUclips and someone bring this and put it on thier responsibility
blow this up guys because that would be awesome 😎😎😎 and put hydraulics on it so it moves and feels real do a race build interior just to save some cash i couldn't see spending 💰💰💰 to put a full interior either way it will be expensive but definitely one of a kind and they could probably sell it for good money once they get tired of it
blow this up guys because that would be awesome 😎😎😎 and put hydraulics on it so it moves and feels real do a race build interior just to save some cash i couldn't see spending 💰💰💰 to put a full interior either way it will be expensive but definitely one of a kind and they could probably sell it for good money once they get tired of it
Funny thing, I knew exactly why the air impact wouldn’t take the drivers side wheel off. I was screaming reverse torque! Thank you Tim from DDE for teaching me this about the Sennas center locks.
I used to have lowriders and the wire wheels were center knock off. i know all about the opposite threads .I was flinching when they were going the wrong way on the driver side.
These guys went from detailing cars and ripping dirt bikes to buying two Senna's and giving away McLarens and trucks.... They're absolute proof that YOU and ME can do anything if we try and work hard! Happy Goonz Year everyone!!
Also like to note the love and help they get from their family. They have a large group of connected people that love each other and are helping each other succeed that all started from these videos, honestly not even that many years ago. Nuts when you really think about it.
yea, also he would've probably broke his hands if he loosened that Bolt/Nut when he sat on that pipe... you guys gotta think about these things cause that would've hurt forever...
Anyone with a smudging amount of Mechanical ability can take anything apart, But it takes 1,000,000,000 times more ability to put everything back correctly!!! Good Luck!!!
I've been following you guys since 2015 and see you guys grow from a tent behind your parents house to this! Keep up the good work! I am exited for the content with McLaren!
Watch the episode of DDE with the exhaust upgrade. They encountered many error codes after removing the catalytic converter and eventually decided to reinstall it.
either way goonzsquad had more money to get shit made or programmed or what ever . ove DDE and it was the smooth interior of the charge pipes that was increasing flow
The temp sticker is there to let you know if the wheel gets too hot which will effect the integrity of the wheel. If it gets too hot it’s throw out job. The gold tinge is the resin.
I started watching y’all when y’all barely had 50-60k subscribers. To see y’all go from your parents small garage to building a shop at your parents house to selling your parents house buying you both houses and building your own garage is insane. Proof the American dream is real… good work!!! I can’t wait to see what yall do with the senna.
@@GodspeedZRZ wanna help a father and son out? Father and son Ferrari rescue. if it wasn't for the goonzquad we would have never dreamed for doing our project. !! Thx guys for the motivation.
This project is overwhelming. You definitely set some good example how to tackle big tasks that most of us shy back from. Just insane how complex that car is, and you start dismantling it without any doubt that you can put it back together. :D
Wow, it’s incredible to see how far you’ve come over the years! I’ve been following your journey for a long time, and it’s amazing to see you working on projects like this now-huge congratulations! The fact that you’re achieving such high-quality results using just an iPhone is truly impressive. One small suggestion: consider using clip-on DJI mics for even better audio quality. You could easily clip them onto your hats, which you always wear, and it would help capture consistent sound, especially when you turn away from the phone. I’ve noticed the audio sometimes drifts when that happens. Improving your production and audio quality while keeping things simple is such a fantastic approach and really aligns with your success. Keep it up!
@ I actually prefer Porsche , just a personal thing, although I won’t ever in a million years be racing anywhere. It’s just an A to B for me. And I only buy convertibles because women love to ride in them and I live in Vegas.
It looks like high temperature resin to protect the barrel from the braking heat 👍 adding kevlar would be a good thing tho, it would help reduce fatigue. Almost all carbon wheel manufactures opt for full carbon as its stiffer than kevlar when secured in the resin matrix. These look like full carbon wheels as there's no yellow along the crack lines, as you also pointed out kevlar doesn't crack like the carbon does. If there was kevlar in these it would be easily visible among the damage as it would look like stretched fabric protruding from the broken edges. 😎
You guys totally amaze me! I can't take anything apart, and then remember how to put it back together. I always have an extra parts pile. You both are fearless! Love watching the process.
Crazy build …. the amount of parts , how things come apart and go back together. I give you guys a tremendous amount of credit for tackling this project. Looking forward to the next video.
Hey guys I've been following you since you were a couple of kids and I enjoy your channel but I have to say that this would be BY FAR the hardest rebuild you ever have done in the channel. I won't miss any of the chapters to see how all this ends up. I wish you the best and hopefully, everything goes well with that piece of art.🤞🤞
I have been watching you guy's for years now and it still amazes me how you just strip cars down and re build them without prior knowledge of certain makes of car !! Fair play to you and keep doing what you do i love it .
Your no goonz’s what you are is fantastic, amazing guys that love what they do. Not enough can be said about you two other then your the best. I’ve been watching for years and enjoyed every minute. Thank you and Happy New Year 2025
I ordered my backpack first episode of this series. It rocks!!! Quality is amazing and I can’t wait to start using it. Thank you both and your families and keep up the great content and builds.
I've been watching you guys for a while. But the last couple of weeks I've been in the hospital after a good heart attack. You guys have made this condebarrable. Good work
All I could afford was the pen but I got to try for that Rolex. Love the videos guys. Been watching you from the early days with the portable tent spray booth. So happy to see how much your channel has grown.
Between this project and the Taravish P1 project, these are the most ambitious rebuilds on RUclips! Really hope this comes out dope. Also hope Vtuned can help in the process, he’s a young master at his craft 💯👍🏾. Best of luck Goonzquad !!
Happy new year to you boys and your families. Simeon your little princess is beautiful. I have no clue how you are going to put that car back together but I’ll be watching every step of the way.
What you guys do is awesome! Love the content, definitely should be getting more views. Every build is done in great detail, no shortcuts! Keep up the great work! ❤
Let’s go brotha, I’m glued in from Detroit Michigan. New time watcher of the channel. Keep at it! And I hope you find the key(s) and original engine cover.
This car has too many parts and connections 😱😱 I don't know how you do it, but over the years you have surprised me so I believe you will be able to solve all these problems. 😮
You guys need to talk to Tavarish and take a trip to Florida to talk to the guy who fixed the carbon tub on Tavarish's P1 and 675LT, i'm sure he can fix those carbon fiber parts.
I dont know how these brothers do this, stripping it down OK, but rebuilding this thing, every rebuild do far has been training for this job, if anyone can do this it will be them, this is going to be the best serries yet, great job guys!
I have not enjoyed a project as much as this one for a long time! Keep up the inspiring work and good luck with the project- it looks like you will truly need it on this one.
I think the reason you guys videos are so good is because y’all have no fear. Keep building these exotic cars. Hope we can see the carbon fiber repairs.
In addition, would also be great if they could do some voice over commentary whilst working on the car. Mat Armstrong does a great job of this as he takes the audience through the process, also adding some visual aids to help those who aren't so educated about such things (like me), which is always appreciated. Merely a suggestion, thanks. 🙂
Then they would have to show the steps of pulling shit apart for the first time and probably not looking to good, instead of just showing the part being removed!
Soy ARGENTINO y ver un Senna es un aborto de la naturaleza pero más aún es ver desarmarlo y armarlo como suelen hacer ustedes con todos los autos que hacen , la verdad los veo hace años y cada vez me sorprenden más ❤
I personally would love to see some included content on how the carbon panels are repaired as well as the process for the wheels. This would be very interesting 😊
Guys I will warn you beforehand if you are going change the whole exhaust on the car. You cant change the whole exhaust without problems. That happened to DDE. There are sensors that will warn the car something is wrong when the amount air coming out isnt same and the car drives funky and throws up error lights
I love the first person camera view. Great job on this project I’ve seen build y’all’s first hellcat y’all’s first gtr love that build then there was the mustang build which is another great build with the procharger then the amazing viper mannn huge fan of the viper I wish I could get a ride in that viper one day but honestly guys everyone who has been watching from day one has seen y’all build so much amazing builds and has seen y’all achieve so much in life I’m so proud of y’all and what y’all have become thank y’all for giving us amazing content keep up the good work and the amazing and mind blowing builds
Dropping out a Senna engine using 3 jacks in sync is wild
Well, they are “goons” 😂🤷🏼
Bro you here great
That’s the Slav way! 😂
No way I watch your channel all the time!
Yep! Thats wild shit 😂
The Goonzquad guys truly amaze me. They fearlessly tear into even the most complex automotive systems as if they have done it dozens of times before. Most people would be terrorized when confronted with some of the projects they have undertaken and especially this Senna! I will watch each step of the way.
Even if they fail they will get their money back from RUclips and with extra money and they will get help at some point now let's try if they can do it as they own a shop with no RUclips and someone bring this and put it on thier responsibility
You need to build a racing sim inside the old McLaren tub, that would look amazing.
That would be insane
Great idea
blow this up guys because that would be awesome 😎😎😎 and put hydraulics on it so it moves and feels real do a race build interior just to save some cash i couldn't see spending 💰💰💰 to put a full interior
either way it will be expensive
but definitely one of a kind and they could probably sell it for good money once they get tired of it
blow this up guys because that would be awesome 😎😎😎 and put hydraulics on it so it moves and feels real do a race build interior just to save some cash i couldn't see spending 💰💰💰 to put a full interior
either way it will be expensive
but definitely one of a kind and they could probably sell it for good money once they get tired of it
holy shhh man that's freaking cool
Funny thing, I knew exactly why the air impact wouldn’t take the drivers side wheel off. I was screaming reverse torque! Thank you Tim from DDE for teaching me this about the Sennas center locks.
💯No doubt was doing the same exact thing..😂😂🙌🏼
I used to have lowriders and the wire wheels were center knock off. i know all about the opposite threads .I was flinching when they were going the wrong way on the driver side.
ME TOO!!!! I WAS SAYING. DDE FAM HERE TO TELL YOU, WRONG WAY GUYS!
It's not just the Sennas center lock wheels. Any car that has center lock wheels like Porsche for example all are reverse thread.
DDE ROCKS
These guys went from detailing cars and ripping dirt bikes to buying two Senna's and giving away McLarens and trucks.... They're absolute proof that YOU and ME can do anything if we try and work hard! Happy Goonz Year everyone!!
it's one senna no?
@@Nm_Kngthey bought a second tub to replace the flrst one thats wrecked. So technically its not two lol
Also like to note the love and help they get from their family. They have a large group of connected people that love each other and are helping each other succeed that all started from these videos, honestly not even that many years ago. Nuts when you really think about it.
Very true. The bond yhey all have is beautiful. They're all successful too. Perfect representation of what a family should be.
Bought 1 senna.other is just a tub 😂😂.
Take your time on this build boys! Do it right the first time! We won’t get bored, we will watch the whole time!
My thoughts exactly. If it takes two months or longer, so be it.
McLaren techs never wanted that engine to ever come out of the Senna😱. Good job for figuring out how to remove that sucker DUDES👌🏻.
pro tip, they mounted it!
I don’t think I’ve ever seen Eleazar that pissed. You’re doing great my dude! Love seeing this new build!
Don’t blame him
160k part almost hit the ground over a $20 stand
And when he stepped on it all pissed off the leg bounced up and hit the one area of the part that wasn’t wrapped lol
Eleazar
@@BogusQuacky thanks for the correction. I made the change
yea, also he would've probably broke his hands if he loosened that Bolt/Nut when he sat on that pipe... you guys gotta think about these things cause that would've hurt forever...
Been watching you guys for years. Honestly congratulations this is a hell of a project.
Anyone with a smudging amount of Mechanical ability can take anything apart, But it takes 1,000,000,000 times more ability to put everything back correctly!!! Good Luck!!!
They will do it 👏🏽👏🏽👏🏽👏🏽👏🏽🏁
@michaeljkasnter be positive man 👨🏿 these guys have proven themselves overtime and I’m confident they will figure it out 😊
Totally agree - but his ability to put things back together has impressed the sh*t out of me over the years. He's very talented.
why are you hating, must be jealousy
All they need to do is watch the video in reverse ;)
I've been following you guys since 2015 and see you guys grow from a tent behind your parents house to this! Keep up the good work! I am exited for the content with McLaren!
Watch the episode of DDE with the exhaust upgrade. They encountered many error codes after removing the catalytic converter and eventually decided to reinstall it.
They won't take the advice
@@Co1eTrain84yeah they’ll find a way 😂
wasn't the errors due to the charge pipes??
ikr for such a small engine to make some much power needs some back pressure that trans is huge though I wonder who built it and what it is.
either way goonzsquad had more money to get shit made or programmed or what ever . ove DDE and it was the smooth interior of the charge pipes that was increasing flow
The temp sticker is there to let you know if the wheel gets too hot which will effect the integrity of the wheel. If it gets too hot it’s throw out job. The gold tinge is the resin.
It's like how they put moisture indicators in electronics, so they can tell if you got it wet.
@ I worked a job in aus making carbon fibre wheels
I started watching y’all when y’all barely had 50-60k subscribers. To see y’all go from your parents small garage to building a shop at your parents house to selling your parents house buying you both houses and building your own garage is insane. Proof the American dream is real… good work!!! I can’t wait to see what yall do with the senna.
I started watching when they had 5-10 subscribers
@@PaulBaciu-q4dcap
@@PaulBaciu-q4d I was the first subscriber..
@@GodspeedZRZ wanna help a father and son out? Father and son Ferrari rescue. if it wasn't for the goonzquad we would have never dreamed for doing our project. !! Thx guys for the motivation.
THE HAMILTON COLLECTION May Have Some Senna Wheels SITTING AROUND
This project is overwhelming. You definitely set some good example how to tackle big tasks that most of us shy back from. Just insane how complex that car is, and you start dismantling it without any doubt that you can put it back together. :D
I absolutely love the in depth disassembling of this car! I hope for in depth assembly and future builds!💪🏼
Wow, it’s incredible to see how far you’ve come over the years! I’ve been following your journey for a long time, and it’s amazing to see you working on projects like this now-huge congratulations! The fact that you’re achieving such high-quality results using just an iPhone is truly impressive. One small suggestion: consider using clip-on DJI mics for even better audio quality. You could easily clip them onto your hats, which you always wear, and it would help capture consistent sound, especially when you turn away from the phone. I’ve noticed the audio sometimes drifts when that happens. Improving your production and audio quality while keeping things simple is such a fantastic approach and really aligns with your success. Keep it up!
The engineering is staggering
Yeah so much engineering and still slower than a $200k 911 at the ring.
@ I actually prefer Porsche , just a personal thing, although I won’t ever in a million years be racing anywhere. It’s just an A to B for me. And I only buy convertibles because women love to ride in them and I live in Vegas.
Pops always has a plethora of ancient beast mode tools, to get any job done!!!!! 8:32
The gold/yellow on the carbon wheels is probably kevlar to increase strength/impact resistance, also used in bullet proof vests
It looks like high temperature resin to protect the barrel from the braking heat 👍 adding kevlar would be a good thing tho, it would help reduce fatigue.
Almost all carbon wheel manufactures opt for full carbon as its stiffer than kevlar when secured in the resin matrix.
These look like full carbon wheels as there's no yellow along the crack lines, as you also pointed out kevlar doesn't crack like the carbon does.
If there was kevlar in these it would be easily visible among the damage as it would look like stretched fabric protruding from the broken edges.
😎
You guys totally amaze me! I can't take anything apart, and then remember how to put it back together. I always have an extra parts pile. You both are fearless! Love watching the process.
It’s gonna happen Tavarish races Goonsquad 2035!
😂
@@carizal172probably still complete it before Freddy. Dude moves like a snail.
@@divinedriftofficial yeah, I think so!
good point,but Fredi Tavarish had already offered to help them
Nah tavarish never finishes his builds lol
Crazy build …. the amount of parts , how things come apart and go back together. I give you guys a tremendous amount of credit for tackling this project. Looking forward to the next video.
Like thats the dad is helping bring him in all the videos he is amazing.
Hey guys I've been following you since you were a couple of kids and I enjoy your channel but I have to say that this would be BY FAR the hardest rebuild you ever have done in the channel. I won't miss any of the chapters to see how all this ends up. I wish you the best and hopefully, everything goes well with that piece of art.🤞🤞
You guys stepped up your game big time. Also love the music choices, props to the editor !
simon’s edits all videos!
I have been watching you guy's for years now and it still amazes me how you just strip cars down and re build them without prior knowledge of certain makes of car !! Fair play to you and keep doing what you do i love it .
Your no goonz’s what you are is fantastic, amazing guys that love what they do. Not enough can be said about you two other then your the best. I’ve been watching for years and enjoyed every minute. Thank you and Happy New Year 2025
i’m impressed with the tear down, giving credit to you all for staying positive throughout
You guys have come a long way over the past years. From watching you guys do your first jeep in your parent's yard to do in this in the shop.
You boys and your family are just too awesome! You've come soooooo far. I've been following since Jeep days, feels like last month. Dang!
You guys are rocking it! What a challenge and learning curve.. well done!😍
I ordered my backpack first episode of this series. It rocks!!! Quality is amazing and I can’t wait to start using it. Thank you both and your families and keep up the great content and builds.
I've been watching you guys for a while. But the last couple of weeks I've been in the hospital after a good heart attack. You guys have made this condebarrable. Good work
Prayers for a speedy recovery
Prayers sent that way buddy🙏🏼Hate to hear the new year starting that way for you. Prayers and blessings sent you and your families way💯💜
Wishing you a full recovery
@qmmadi thanks, I really appreciate that.
Get well buddy
Goonzquad tag showed up today. Earlier than expected. Appreciate it guys. Keep doing what you do. 🤘💪🤘💪🤘💪
All I could afford was the pen but I got to try for that Rolex. Love the videos guys. Been watching you from the early days with the portable tent spray booth. So happy to see how much your channel has grown.
Between this project and the Taravish P1 project, these are the most ambitious rebuilds on RUclips! Really hope this comes out dope. Also hope Vtuned can help in the process, he’s a young master at his craft 💯👍🏾. Best of luck Goonzquad !!
Happy new year to you boys and your families. Simeon your little princess is beautiful. I have no clue how you are going to put that car back together but I’ll be watching every step of the way.
The best ICOs emerge during alt runs, and Adaxum is proving to be one of the strongest candidates this season.
Amazing progress! Cannot wait for the next Senna upload
What you guys do is awesome! Love the content, definitely should be getting more views. Every build is done in great detail, no shortcuts! Keep up the great work! ❤
Let’s go brotha, I’m glued in from Detroit Michigan. New time watcher of the channel. Keep at it! And I hope you find the key(s) and original engine cover.
Love that green,suits mclaren perfectly
It's going to be impressive watching the boys put THIS one back together! 🔧
Keep grinding guys you have come a long way keep it going
I can't imagine the kind of stress that you guys go through to put all this content together, happy new year, it's just the beginning let's go.
Man I can’t wait to see this thing finished…I’m glad I’m a car guy because I love watching these videos…Great work guys😀😀😀😀
You guys never cease to amaze me. Keep it up guys. I'm anxiously waiting for the next video.
You guys are doing great job and you are inspiring millions. Much love from Kenya
Wow that’s so fire my brother i’ve been watching you guys since 2015 maybe even before that I just know it’s been many many years
The level of work you guys do is mind blowing.
This car has too many parts and connections 😱😱 I don't know how you do it, but over the years you have surprised me so I believe you will be able to solve all these problems. 😮
I love your videos! Can't wait to see the next update!!!!
Doing a great job, boys. It's going to be an excellent build. I'm amped up for this.
Same processes as fiberglass repair but with carbon fiber you should use a vacuum bag to keep air bubbles out of it so it doesn't separate
Hello, I'm from Brazil, what you do is simply insane
congratulations
This series makes me so happy to see my fav car get put back on the road and learn a lot about it!
Ask Tavarish. He has some local man to fix carbon. You have a few hours driving to Florida :)
i just posted that, didnt see your post.
No! I don't want these village idiots anywhere near real car guys.
That is what I was gona suggest. He could also fix the quarter panel.
Agreed he fixed the 675LT hit him up
Nobody is fixing that tub
Gotta say, you boys have a huge set! I love how you are fearless with the disassembky of this hypercar. Can't wait to see the final product!!
I love your videos you guys are killing it I remember when you started in your parents driveway
20:51 You should give those cats to your neighbor Joe..lol.. Refine the gold off the heat shield, too! 😀
You guys need to talk to Tavarish and take a trip to Florida to talk to the guy who fixed the carbon tub on Tavarish's P1 and 675LT, i'm sure he can fix those carbon fiber parts.
i 2nd this
Ain’t no fixing that tub.
@@watchingvideosyup he said carbon fiber parts not the tub
Yeah copy that guy, didn't his rebuild blow up after 3 times driving it?
These guys need no help. Tell Tavarish to finish his p1 first LMFAO
I dont know how these brothers do this, stripping it down OK, but rebuilding this thing, every rebuild do far has been training for this job, if anyone can do this it will be them, this is going to be the best serries yet, great job guys!
Brilliant as always guys , always enjoy your videos 👍🏻👍🏻🇬🇧
Wow It’s amazing to watch these cars and trucks come together 🤗🤗🥳
I like the respect that Simon has for Billy ❤
I have not enjoyed a project as much as this one for a long time! Keep up the inspiring work and good luck with the project- it looks like you will truly need it on this one.
This car is way to advanced for your guys knowledge
It seriously feels like yesterday you were building a jeep on the slab ❤❤❤ now one small carbon piece is worth more than that jeep
Happy new year guys. I can’t wait until the finish line you guys doing a good job!
Wow!!! What a herculean task. You guys are amazing!!!
Action speaks louder than words… Goonzquad guys are the best.. proven 🥂🏁
Dude i love getting old school bad ass tools from garage sales and stuff that old shit never fails and is a beast!!
I think the reason you guys videos are so good is because y’all have no fear. Keep building these exotic cars. Hope we can see the carbon fiber repairs.
I can not believe how many hoses, lines, sensors, and other pieces of equipment are on this thing.
One month 😮. I don't think so boys you have allot of work in front of you .but miracles do happen. Keep up the great work 👍
Great job guys, yall are unbelievable
Mat Armstrong has entered the chat!!! 😂 20:23
In addition, would also be great if they could do some voice over commentary whilst working on the car.
Mat Armstrong does a great job of this as he takes the audience through the process, also adding some visual aids to help those who aren't so educated about such things (like me), which is always appreciated. Merely a suggestion, thanks. 🙂
Then they would have to show the steps of pulling shit apart for the first time and probably not looking to good, instead of just showing the part being removed!
Way to go guys keep up the good work
One of my most watched channels between you guys a vice grip garage and some sled vids Im all set every week. Keep it up guys
That's insane .. yall have mad skills...
Guys, one of the best projects you’ve had..!! Can’t wait for the next episode to come on line..! 👍🏻
Like the style with the music
You borrow those center lock tools from DDE, Tim went over how to use the exact tools in their last upload?
My favourite you tubers ..been watching your videos for over 5 years ..never disappointed.all the way from Africa kenya.
You boys should’ve watched the DDE video from last week where Tim explained the whole process of removing Senna rims
One car that's all I want😊. Have a happy new year all and Godbless us all🙏
Great videos I love how you work and spend money.
Soy ARGENTINO y ver un Senna es un aborto de la naturaleza pero más aún es ver desarmarlo y armarlo como suelen hacer ustedes con todos los autos que hacen , la verdad los veo hace años y cada vez me sorprenden más ❤
I personally would love to see some included content on how the carbon panels are repaired as well as the process for the wheels. This would be very interesting 😊
Agreed💯👌🏼
I.m sure he won't show any of his secretes on RUclips. That would be foolish of him to do that.
I like how organized you guys are. Keep it up, love your content
🌴🤔 hummm, I hope y’all remember where all that stuff goes back together ! 😂
When you put it in.
Race mode it lowers down with those accumulators
Guys I will warn you beforehand if you are going change the whole exhaust on the car. You cant change the whole exhaust without problems. That happened to DDE. There are sensors that will warn the car something is wrong when the amount air coming out isnt same and the car drives funky and throws up error lights
Wasn't that with the intakes
@ If I remember correctly there were problem both with intake and the exhaust. Possible I am wrong tho, it has been some time since those videos
It was the intakes that were the problem on Damon's Senna. The exhaust is still on the car.
It'll have a permanent check engine light without cats...just like all the other builds
I love the first person camera view. Great job on this project I’ve seen build y’all’s first hellcat y’all’s first gtr love that build then there was the mustang build which is another great build with the procharger then the amazing viper mannn huge fan of the viper I wish I could get a ride in that viper one day but honestly guys everyone who has been watching from day one has seen y’all build so much amazing builds and has seen y’all achieve so much in life I’m so proud of y’all and what y’all have become thank y’all for giving us amazing content keep up the good work and the amazing and mind blowing builds
You guys are going to have to get with DDE for those Accumulators and getting them right
Have been watching yall since the jeep renegade build. Way to go guys. You both have come a long way!
Your content are always on point, never stop!
you guys are absolutely crazy, and I love that. Keep it up boys!!!!