HOW TO TEST RADIATOR FAN MODULE CONTROL BOX ?
HTML-код
- Опубликовано: 11 дек 2024
- HOW TO TEST FAN MODULE CONTROL BOX ?
►► Ms908p Scanner: amzn.to/2LCi9AG
In this video we will demonstrate how to test radiator fan and radiator fan control module. We used MS908P Scanner to test the cooling fan control module. This procedure will work on most modern cars. In some cases you will be able to test the different speeds as well. As you can see this fan control module has 8 different speeds.
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
►Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.
Products that we use and recommend:
► Panel Removal Set: amzn.to/3YiMADu
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
►Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
This is ok if you have all the pro tools but , absolutely no good for me.
Then just jump it
Then maybe diy ain’t for ya
Hi,
That's a cool device. It's just more expensive than I thought, but seems tremendously useful. I have a Toyota Sienna 2011 and when I try to turn on the ac nothing shows up on the screen nor the fan starts. When I press the fan up or down, nothing is shown on the screen nor the fan starts. This only happens for the front. The back works OK. Thx.
Scanner is 2500 bucks....little outside my price range.
Yes I can just buy 5 fans for that price
@@MercedesE63S-AMG 🤣🤣🤣
It’s worth it.
Perfect video I have an issue with the fans of a 2014 toyota camry xle V6 the problem is that I have two positives after the fan's connectors but when I disconnect the Fans in the module exit I have positive and negative so the ground is missing once I connect the fan's connector to the module
To buy these tools it's cheaper to just straight out replace the control module. Heck can buy the whole Thermo fan setup for a fraction of what these tools cost lol.
My module is 400...these guys aren't helping.... Just advertising how they can gix your car with the newest tech.
Just read more about how to program these cars and buy an opcom from aliexpress.
At first I thought buying such tools would make things a lot easier but I was so wrong. I use a similar tool of the same brand probably a low end with the same interface and I have an issue with my VW Polo 1.2 petrol where the radiator fan runs loud as soon as I turn the engine on and stays on at full speed (more than it should) and then the dash lights, headlights, radio display starts flickering. The fan turns off only when I swift the engine off. And this tool tells me to check the generator, battery, fuses and doesn't say anything about fan. All it tells me the voltage is low which I can see. I replaced the battery first and then the alternator and the issue is yet there.
@ShaggyMike,
hus radiator fans connection might have been altered,
bypassed to a direct connection in accessory wire,
its done here in philippines when the fan ecm malfunctions
Thanks for the video.
My 2014 fiesta ST's fan works at low speed but not high speed, it use to but not anymore. I checked fan relay and fuses and they all fine. Ford seem to have never heard of my problem.
Now go buy the $2500 scanner and test it.
Rob H Now, why didn't I think of that ! 😭
same on passat 2015 do know what issue was?
This is for dealer mechanics. Does not help me; don't even show location of control box!!!!
Why do I feel... when speaks... it should always end with "wasn't me"
Especially after getting caught redhanded.... ;)
Lmao 😂
Brilliant!!!
oh god that was so helpful . thank you so much sir for your wonderful video and effort . God bless
Very nice Video, if we always count with the right scan tool never fails in Diagnose. Thanks for share 👍🤗.
When I replace the fan control module with an OEM used module does the new one needs to be programed? 2006 Audi A4 Conv 1.8T FWD.
Hi there, really need a second opinion. My focus fans are not working at any speed. I have changed the thermostat and housing at front of the engine. I have also changed the temperature switch. I wired my fan motor directly to the battery and it kicked in. I don't have a diagnostic computer to run your test but I have checked and the symptoms I'm having is the fan control module faulty. From your experience what would you think. Don't worry if it's wrong, I just haven't got £500 to give to the main dealer to rectify a fault that might take them 5mins lol
It's probably the fan module
@@robh1908 Nope I've that, thermostat and temp switch. I have no idea what's causing this issue.
@@ZeroGHome24
What is the year?
@@robh1908 he's not sure.
Hi @zeroGHome24, how do you resolve the issue? Is it okay now?
on a ML350 2015, does the cooling fan comes with the air module inside????
How would you do this for a VW Touareg?
You don’t
This tech is great to have.if u are a real mechanic. Problem finding a good mechanic and cost of parts. How to repair today's car. Good mechanics thing from the past. Today's bunch of back yard lazy wannabe mechs.thank God for you tube.
Where in heck is the cooling fan controller????
What vehicle ?
Should be on the radiator fan where the wires power it
All Good 👍 work
Great video. I have same Scran tool you have. Love it and save time & money
I dont have a OBDii scanner. What is the alternative?
Is the signal sent in hertz ? How many ?
Ok I have voltage on the two main wires but nothing on the control wire. What controls that ? Is there a fuse or that comes right out of ecm ?
Isn't that the signal wire? The wire that sends a signal to the fan to turn on when the engine is hot? If so, wouldn't it be going to a sensor? Just asking. I'm trying to find a solution to my own problem as well. Maybe that same wire you're asking about is what's not allowing my fan to work properly.
@@pedrovaldez9559 i have found out the signal wire is controlled by a cuircit board that gives it a duty cycle . When I unplug the signal wire and leave the power wires on the fan runs full speed. So I tried replacing the module tha is mounted on the fans. A genuine module from the dealer. And fans took off and started working. I should’ve bought a cheap fan control module off of Amazon
@@jonrenoe450 think you can send me a link where to buy one? I seen one exactly like mine on Amazon and I have to order it from China. 😆 I'm wondering if I can go to a junk yard and find one that looks like mine?! Idk. I know that female ends have to match my plugs.
So, simply change the module, right?!
Hi sir.I have problem while engine cold everything ok when engine hot fan work and non stop until i stop the engine.Radiator,fan,coolant,coolant cap changed with new one
Hello,is it possible to reprogram the fan's starting temp(ex: from 95°c to 91°c?
That probably would be detrimental, unless you changed thermostat on engine to allow it to open earlier.
Can WE do it with vida dice Volvo ?
When I run that test on my car. The off button does not turn the fan off. I have to back out of live test for it to stop. Could there be a problem ?
Helpful and genius
What happens if I connect the fan directly to the wire coming from the car to the madual
I know a lil mechanicin, and what would happen is, that wire would be connected directly to the fan.
@@TresJuevos 🤣🤣🤣
What was that tick tick tick sound when you turned the key on? Mine makes that sound
Blend door Actuator
@@denisrodman1843 I came to the comments to say the same thing, lol
wtf? ok, so how do you test the module without one of these complicated pieces of mo-shinery. do you not think that someone willing to lay out the cash to buy one of these diagnostic computers would be a fairly good mechanic and would know how to do a basic test on a fan module? although there may be a small number of people with more cash than sense and plan on buying one of these and then learn how to use it, but more likely than not would end up turning their car into a 4000 pound paper weight without prior training. this video is totally useless to someone without this diagnostic machine? so, what was the motive in posting this? after watching this i still have no idea of how to test the fan module. guess i'll just unplug it and see how the fan and motor reacts.
I didn't know Lodka from Taxi & Abu from the Simsons had a kid🤭
It's all well saying this,
But the PERSON searching for issues & clicking on this Totally Misleading Stupid
Vid , Doesn't have Friggin,
Autoscan Module like this!!
How's this going to help anyone but a garage? I don't get this whatsoever, & should be removed
This let's me know how my shop could or should be testing my module instead of just replacing it or saying it's all good. If my shop just says "well they turned on for me" but don't have the right testing equipment I may go elsewhere.
Thank you for help useful
My fans don't work correctly sometimes work sometimes stop
Maybe it's time to change my radiator fan control module after test fan with OBD
Why 46 dislike 🤔
Did it work?
176 dislikes now.
spit out the marbles
😂😂😂😂
Oh yea , I wish I had one if those scanners hehehe
Yeah,
This really helps. 😂🤣😭
Need a Thousand dollar machine to tell you? What's the point?😜🥴😜
It is a multi function machine. Why disdain?
To get you to buy one from their store it seems.
Just a long winded add for an overpriced product....
Radiator fan control module controls speed of fans and when they come on?
How can I test without this tool. With module out of car?
Mazda cx9 2013 with heavy cooling
I have the problem with my fan radiator ..soon after the engine on,fan was running...meanwhile the engine temperatur was still cold.
I've changed :
ECT
THERMOSTAT
3 Relays in ipdm
Radiator
The main problem is the fan is always running soon after the engine on.
nice tool. nice function
4:18 isnt speed what should be not actual speed
My fans stay on
Advert for a tool 😡
I have a 2016 Jeep Cherokee Sport. I've been on RUclips and searching on Google for help. Maybe someone here can help. This video doesn't show how to test the cooling fan module without a expensive scanning tool. Nor does it show how to replace it.
The problem is that my fan is not going at full speed when it needs to cool the engine down. Sometimes it doesn't turn on. I unplugged the fan and I ran it directly to my 20 volt dewalt battery that comes off my impact drill. The fan work perfectly well! So, I know there's nothing wrong with the fan. Now I'm trying to work my way back to the power source. The fuse is good. From the fuse to the module there has to be a.problem that's not allowing the fan to operate properly like it's supposed to.
Anyone have the same problem or has a solution? I was thinking about unplugging the fan and connect it directly to the headlights or something else so when the car turns on the fan turns on and is able to cool the engine down properly.
Pedro, did u fix this issue? I have exact same problem with 2014 Grand Cherokee. Pulling my hair out
@@rodneyjacome6117 no.
I watch your videos and I have no doubt that they are good, but the title is lousy, as a teacher said when we forgot to put symbols, and he told us: they explain what it is or they are; dogs, stones, donkeys, mules, horses or monkeys..
Battery will fucked up coz of this To muvh fast fan
This is a joke , thought he was going to explain how to do it with test lamp
Hi, I have a problem with my fiesta st 2016, I had an accident, I fixed it, but now the fan doesn't work, I already changed the fan module but still doesn't work, can you help me to know what is the fuse and the relay of the fan, please
Do u check ur fuses or relays??
🤙🏿🤙🏿🤙🏿🤙🏿
Golf mk5 radiator fan turn on when i put ignition on and not stopping. I have replacement sensor temperature ,sensor f radiator ,also fan but is still the seam what to do can u tell me ?
we need manually we are not a professional mechanic we dont have the kind of equipment..
i have a tool that emulates a Tech2 and it was only $100 saved tons of money using it
Yup! That's why we're on here because we're not pros!
@@duanebendt would you share a link or product info please?
Peugeot 308
Sounds like his throat is clogged up
I dont like this video
Very bad video description, yea you can test with a damn scanner. Most ppl dont just have a $1000 scanner laying around... should've done it with a multimeter
parts changers need a scan tool to tie their shoes.
Haibor👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌👌
We'll be okay, using, ok, a 5000 dollar, okay scanner, okay, it works okay, on okay, Audi, Volkswagen, okay Mazda, okay ford, and literally okay, updates okay all the time. Okay?
Can you auto repair yourself ,(ok) this video does not explaint or answer any question,(ok) just a ramdom guy showing of his expensive scanner tool!...OK!!