Highly recommend not starting this project until you find someone able to bend flat stock or the right sized pipe. I spent an entire day calling and going fabricator to fabricator and NO ONE can do it. I also can't find the right pipe. All after paying someone to plasma cut two pieces of steel into circles and welding up the nut and chain. Really wish I would have just bought one.
Those grinders are junk and they'll tell you so if you simply ask, they told me they are only meant to do light light grinding like once or twice for a few minutes a month! Don't waste your time with the cheapest one buy the 30-40 dollar grinder and that way you won't throw your work away the same hour you finished welding it up.
4:24 Just one suggestion if you can find some quarter inch tall angle iron and weld it inside where the chain bounces the rocks on the inside diameter of the iron shell. Thereby helping to break up the rocks. You'd save battery because the energy would pack more punch to crack and break apart the rock.IMHO
thanks for being so inventive, I was just thinking I needed a smaller one and I have a larger grinder than that from Craftsman from about 30 years ago that will work really wonderful. Once I figure out everything I need to put together. chairs
I seem to have an issue with every battery operated grinder i use for normal operations. The issue is the extremely fast paced nature in which normal use drains a 4or5 ah battery in about 5-8 minutes.
Great idea , I built one for a grinder too ....same principle except mine is octagon with a top load chute n cover . Lil hard on grinders but great for samples in the field
I've been beating this so fried Rock up with quartz and pyrite I've been beating it up for like 3 days and I'm only halfway through making it look like that with primitive hand tools Hammers and chisels and a coffee cup thermos but I've been banging rocks to powder with backside of drill bits auger bits wish I had one of those he's done in like 5 minutes good show man good show
The exhaust the blue thing, I would use a vac hose but use a screen in it, anything bigger than you screen would stay, anything smaller goes through vac hose, make long enough, screen to end of hose you can use as a scoop for the gravel, 6-8 in. Feed in the crusher in and suck out the fines. All from vac hose.
Greg! This is awesome! You should start selling these! Great idea!
we agree sell some please advise us as well
Highly recommend not starting this project until you find someone able to bend flat stock or the right sized pipe. I spent an entire day calling and going fabricator to fabricator and NO ONE can do it. I also can't find the right pipe. All after paying someone to plasma cut two pieces of steel into circles and welding up the nut and chain. Really wish I would have just bought one.
Those grinders are junk and they'll tell you so if you simply ask, they told me they are only meant to do light light grinding like once or twice for a few minutes a month! Don't waste your time with the cheapest one buy the 30-40 dollar grinder and that way you won't throw your work away the same hour you finished welding it up.
I would suggest the fasteners should be welded on the outside of the housing so the chain and rock bits dont shear them off.
Now that is a great idea, thanks for sharing with us.
Greg from Oregon. Thanks for sharing very good video.
Nice unit man!
very nice! all you need a rubber gasket 7:06 between them
Just like the full size motor one. good idea.
Love seeing it put together thanks! BTW also got a kick out of the ending LOL!
4:24
Just one suggestion if you can find some quarter inch tall angle iron and weld it inside where the chain bounces the rocks on the inside diameter of the iron shell. Thereby helping to break up the rocks. You'd save battery because the energy would pack more punch to crack and break apart the rock.IMHO
Спасибо! Отличная идея. Thenks. Idia is excellent!
One of the best tutorials and explanations on YT :)
I am going to borrow my neighbors grinder and try this!
You my good sir are brilliant!! That is awesome! But question 🙋 can I just buy one of those already made from you? Wish I could weld
thanks for being so inventive, I was just thinking I needed a smaller one and I have a larger grinder than that from Craftsman from about 30 years ago that will work really wonderful. Once I figure out everything I need to put together. chairs
Now I know how I'm going to crush my computer chips for gold recovery. Thanks a bunch!
How did that turn out
Thats why I'm here too lol
Going to do that with Ryobi 18V cordless grinder. Great idea.
I seem to have an issue with every battery operated grinder i use for normal operations. The issue is the extremely fast paced nature in which normal use drains a 4or5 ah battery in about 5-8 minutes.
Very impressive performance. Funny how we also have that same problem with the little red light.... :)
Great idea , I built one for a grinder too ....same principle except mine is octagon with a top load chute n cover . Lil hard on grinders but great for samples in the field
Do you sell yours
@@raydowdy6914 no , too much liability
Freaking brilliant!!
Lol awesome video and awesome idea! Love the affection at the end too lol 💯🔥😂
Is this on the market yet? or could I get one of these from you?
Ha ha ha your ending was awesome.
Could someone please describe the purpose of this tool? I see you're crushing rocks into dust bur what for? What is the goal with the end product?
Great idea! That's a miniature of patricks rock crusher!
Great video even the end wife the wife thats f@#$in awesome
I've been beating this so fried Rock up with quartz and pyrite I've been beating it up for like 3 days and I'm only halfway through making it look like that with primitive hand tools Hammers and chisels and a coffee cup thermos but I've been banging rocks to powder with backside of drill bits auger bits wish I had one of those he's done in like 5 minutes good show man good show
Great for out in the field quick sampling of rock
Good Idea. Thank's God bless you.
I'm From
Obi Island Indonesia
LOL...little red light! Hey, great idea. Hows about the measurements you made putting this together?
Very cool solution, thanks for sharing pal.
Nicely done Greggors....
Use the lock but.......oh you are. Cool.
I liked , but wish you would have crushed some gold bearing quarts ;)
I'm very impressed! Thanks!
I have an idea, lets do all of this while the power is turned on and the grinder is plugged in.....
eBay link isn't working. Any word on the benchtop mount or outgoing bucket attachment?
Very good, Thanks mate
What sort of motor could you use in the field where you don't have ac power,just battery power?
Use an 18v battery grinder
Just buy an Inverter and you'll have plenty of AC power.
hahaha you had hell of a time there but great idea sir loved it
The exhaust the blue thing, I would use a vac hose but use a screen in it, anything bigger than you screen would stay, anything smaller goes through vac hose, make long enough, screen to end of hose you can use as a scoop for the gravel, 6-8 in. Feed in the crusher in and suck out the fines. All from vac hose.
Do u build and sell them looking for one have the same grinder just need rock crusher.
The wingnuts in this town go on...and on...and on.. 😳
"Dammit woman! Dont touch things you dont understand!" -Me. Said more than once. Haha.
Thank you very very very much . Now i can make a rock cruch grinder for free .hhhh
You are the real hero of the world
hey that a coll idea, I really waiting for something like this. Great Men!
I'll buy one.
Where can I order the kit to add to my grinder?
Great vid ty for sharing
NICE
Please make and sell these man. The other options out there are $400-$600.
THANKS GOOD JOB
Amazing
Very good
Do you know of a bigger build to pulverize bones
Excellent!!!
Mantaaaaaap....sangat kreatif
Love your work and so genius
Great idea thanks sir
Is the juice worth the squeeze 🤔
Brilliant!
Thanks brother for the info.
Well, don't lose grinder warranty paper.
Very nice.
That's a good one. Should use a small jaw crusher to get smaller stone's, or you'll were out chains in about a week
Sweet.. Any for sale ?? would love one of these..
Take my money.
(Boa ideia) It's a great idea...
(Estive procurando por algo assim) I had wanted for something like this.
I would add a small rubber seal to keep the sediment from spilling out the back side.
A wide rubber band could work in a pinch, just stretched around the outside.
Use a hand held battery grinder and you can go anywhere.
Oh … It is Cordless Grinder. Is right ?
Hi, my name is Lee Batchelor from Singapore. Any possibility you can sell us that as a kit?
Muito bom
wingnuts and we have a lot in this town, lol, was that a biker joke
Rubber gasket on back side of lid will eliminate the dust blow by, but pretty interesting and functional
Never pay for talcom powder again!
Show!
Hallo eine vielen Dank sehrgute Darstellubg im Daiteil habe mir es gespeichert und möchtees nach Bauen
Brilliant thanks
pretty slick
im sure that's great for the lungs.
...wear a breathing mask?
Ahhh, maybe a mask
Gratulacje za pomysł, ale efekt koncowy to lipa😆
Good ideal. You sound like my boss at the end. 😡😡🤬🤯
Do you sell these
i want one how much?
cheers brother
should have unplugged it first that way no accidents can happen
Hi Greg, where are you located? can you make one for me? I will buy!
Me too.
@@trust10449 as well as us too !!!!!!!!!!!!!!!!!!
Patten that and sell them!
Can I just buy one from you 🤣
👍👍
Hey Greg I have to be honest and say I was going to give you thumbs down but the ending of the video gave you two thumbs up.
i need that....
The last part. xD
Ok mantef
This Route Rock Crusher
Brilliant
please sell these :-)
YeeeeeeeeeHaaaaaaaa
🏆🏆🏆