Thanks! This got me up and running in about 5 minutes. No need to buy a bunch of other fancy audio gear for zoom calls or live streams.
3 года назад+10
I'm working on a review on my channel about this equipment and it's a great product, but so far I see a lot of room to improvement: - Gain control on transmiter or remotely over the receiver. - PAD button on APP doesn't work. - Transmiter Start/stop recording control on receiver - Batch file exporting on APP - APP on smartphones not only desktop
Hi. I´m having problems to get to the back up recordings on the TX devices. At de Rode Central aplication for desktop it say that there is no recordings avialable, also it indicates that there is no room for more recordings and if I get into de devices as a pen drive I see the EGG and UGG files, but I cannot use them as an audio file. Please, help!!
The RØDECaster Pro II drivers are available now via our downloads link: rode.com/en/interfaces-and-mixers/rodecaster-series/rodecaster-pro-ii#module_25
I have two questions 1.Does it work with any other usb c to usb c cable? 2. Doe ist work with a usb c to usb a cable using an adapter for a macboock (usb c)? Than you!
Hey there, the Wireless GO II works with many different cables, however we can only confirm that it works with cables we make, such as the SC16 and SC18. The reason some cables work and some don't is because transmitting multichannel audio over USB requires a minimum level of transfer speed.
Guys! It will be Amazon if we can connect the wireless Go II to the rode connect, so we can use it with our Rode NT mini. Btw, I love the effects hahahahah it was really funny 🤣🤣🤣🤣
is it possible to have 3 receivers (each paired with 2 transmitters) connected to a PC simultaneously, to have mic audio input of 6 individuals on one pc (Obs studio)? or do i need a rodecaster pro2 for this?
Hey there, a RØDECaster Pro II would likely be the best solution, but if you have two Wireless GO II kits, you could plug them both into a computer and use our RØDE Connect software to record them all.
hi! i purchased two Wireless ME kits and 1 additional transmitter. i connected both receivers to the laptop (1 via USB-C. 1 via USB-A). they both show up in rode central (win 11 on high-end MSI vector gp68 HX 12V laptop) and pairing works fine. however, there is only ONE "wireless me rx" showing up in windows audio recording devices. although it wouldnt make any sense (cause rode central shows both of them) i swapped cables, still only 1 showing up. edit: used an active USB-Hub with USB-C ports on it and it worked. seems like you cant connect the receivers to a PC via USB-C_to_USB-A cable @@rodemic
@@rodemic When you record audio in real time to a DAW Software such as Cubase / Reaper / Logic in your computer, can you have each of the 2 recorded persons audios in a interview into 2 individual channels inside the DAW ? Will the Go ll driver let the Daw identidy 2 diferent signals?
Yes! You can connect 2x receivers to your computer via the USB and as long as you have 4x transmitters this will work well. We recommend using RØDE Connect to manage these inputs: rode.com/en/software/rodeconnect
@@rodemic thanks, so I will order 2 sets of rode go ll - Should I put the receivers roughly 1 or 2 meters apart from each other? Or should I add an extension to one receiver to make the distance possible? If the connect app does not work, can I use adobe audition or any other audio app to record and monitoring multiple people ?
I am frustrated because I still cant figure out how to use my Wirelelss Go pair to record video interviews on zoom. It works when i record myself but when i have a guest, it doesn't. I have watched all sorts of other videos and bought several extensions to try out and still cant get it to work on my MacBook on zoom interviews. Can you please help and make it clear how i can make it work?
Hey Efi, we'd suggest trying out RØDE Connect: rode.com/apps/rodeconnect here's a great step by step guide for how to use it: ruclips.net/video/oxkjQm4isVk/видео.html
Hey - I cannot find any recordings on my transmitter when I go to Rode Central - but when I record on my computer it works - please suggest how I can find my recordings on my transmitter - is there a switch?
Sorry to hear about that! Be sure you are using a USB cable that is capable of delivering audio as some cables such as Apple's are only able to provide basic charge and sync functions. If you require any further assistance, feel free to reach out to our team through here - help.rode.com/hc/en-us/requests/new
Hello, I am new here… Great video, btw! I would like to ask, for video podcast with 3-4 people, should I get with Rode Wireless go 2 or Rode videomic go 2? Thank you!! 🙏🏽
I have them connected to pc, with the app and my microphone of pc has the rode mic selected. But i cant record on my pc... There is no setting button next to the battery icon... How do i fix this?
Any USB-C to USB-C cable should work, as long as it's capable of data transfer. The SC17 is our USB-C to USB-C cable that we can guarantee will work for this - www.rode.com/accessories/cables/sc17
@@rodemic Thansk for the reply. May I request you to suggest me the settings for an interview? e.g what is the best mode ? -DB? etc.Yesterday I used this for an interview as a clip microphone. It works very nice but once I edit I found the voice is very hars/noisy/not smooth to hear. I guess my settings was not proper. Could you please help?
This works but it is too limiting - I want to use other inputs of my audio interface at the same time, e.g. recording a guitar signal or other sound source. When I try to connect the Rode Go Pro via the TRS cable and a TRS adapter to my Apollo interface, I am getting 0 signal. What am I doing wrong?
Hey there! I'd recommend reaching out to our Support Team and they will be able to give you more information regarding your setup 😊 here is the link where you can reach out - help.rode.com/hc/en-us/requests/new
@@rodemic Thank you so much for your kind answer! I have figured it out as far as the interface goes and it is brilliant! However, I am still getting 0 signal when I run into my Quad Cortex despite the fact that a SM58 is working just fine. I'll try some more and if I fail, I'll reach out to support.
Latest news is that if I go into the return 1 of the QC it works fine. No idea why the mIn input does not do the job but I am all set now. The one issue is that it feeds back more easily than the SM58 but that has to be intrinsic to using a Lavallier mic I guess.
Hi Rode, I can connect my rode wireless go 2 with my Mac but when I voice over with it in video editing software ( such as Davinci resolve), the voice over sound is so low, despite I’ve turn it to the highest on the transmitter? Is there any solutions? Thank you!
Love this, but I just recommended my client buy the original Wireless Go v1 and we cannot get it to work with her new Macbook Pro M1 version. We've got the SC-7 cable & a Millso USB A to 3.5mm audio adapter. We also have a Millso USB Type C to 3.5mm Adapter, plus a new Hub - Purgo USB C Hub Adapter for the M1 (USB-C TB3 (40Gbps,5K@60Hz), USB-C Data（Data Only), & 2 x USB 3.0,), but cannot get the Rode to work. We've set all the preferences correctly inside the mac, and have tried the Type C with & without the hub, AND with the USB A adapter into the USB A on the hub. Can you help explain exactly how to connect the original Go with the new M1 Macs? I've searched high and low and cannot find anyone addressing this. Maybe it's just me, but I'm failing my client and it's getting weird. :-) Thanks!
I`ve recorded sounds using my original Rode Wireless GO with my desktop and laptop and tablet since it came out and did not think that it is something special. So what is the big news? Am I missing something?
@@rodemic Okay, this is exactly how I`m using my two the Wireless GO systems. They are working with all my Macs and PCs through USB and USB-C and Thunderbolt ports with no issues. Thank you for reply.✌
I have bought this set for my Lumix camera, i have connected lavalier stereo mic, but only one channel is being recorded. Is there any way to set transmiter to record or combine both channels?
This feature would be my dream come true. Than, I would rush to the store to huy one kit for myself. Rode should include earphones to this kit as well.
Why when i connect my wireless go 2 to macbook and already set the volume to the highest, but the sound is slow, i need to bring the mic to my mouth to make it sound loud? Please help
Sorry to hear that! I'd recommend reaching out to Support and they will be able to look into your setup in further detail - help.rode.com/hc/en-us/requests/new
When I select the go2 receiver rx in Audition, I can only input separate audio from tx 1 and not tx 2. I can input audio when Tx 1 and Tx2 are merged,but nothing from tx2 when separate. Can you help? Do I have a faulty transmitter 2?
Hi, I have one question. I tend to have many video calls per day and can (in a crisis situation) charge the transmitter while using it? Thank you for the response.
Yes, lovely. Buuuuuuuut……where is my Android and iOS app? This is a major reason I purchased it hours after its release, and months later, I’m stuck wondering why I can’t still plug it into my iPad to transfer files.
hello my rode wireless 2 didn't work and when i installed the application on my phone and connect the microphone it was blocked totally then i tried to install the program on my pc he didn't accept any type of windows 64 bits and 32 bits
@@rodemic I was able to connect a microphone to my computer, but the sound is very bad. Tried on two more computers - also bad. Tried on iphone 12 - good. What in this case needs to be done to be good on the computer? Buy a sound card?
@@rodemic I just tried connecting the rode wireless go to my computer with a good $200 sound card, but the output is still worse than when I write through the Iphone 12. Even my $25 USB microphone records better. What do you think. RODE AI-Micro cannot be purchased because there are no deliveries to Ukraine now
Install the latest firmware update with RØDE Central for a bug fix: rode.com/microphones/wireless/wirelessgoii#module_16 . If any ongoing issues, get in touch at info@rode.com!
Check out this blog for a little trick on keeping the lavalier plugged in! rode.com/blog/all/No-Locking-Connector-No-Worries-The-Wireless-GO-Safety-Loop-Trick
Looking for these updates. If possible. 1. Built-In Noise Cancellation or Reduction. 2. Auto conversion of audio to dual-mono during Split-Mode. I don't know if this has to be in Premiere or any editing software or it should be inside wireless go ii. Cause I have to modify the clip inside Premiere in order to get the dual-mono for the two mics. 3. Multiple audio export inside Rode Central. Right now I can only render one at a time. 4. Is it possible to have the transmitter's auto recording to be already rendered like a normal recording from an sd card. So we can just copy and paste it? No need to export? 5. Batch Audio File naming for each transmitter. I am an organized person. And I want to rename all of the transmitter's audio files according to their number. Like for example, TX_01(Transmitter/Mic Number)_REC00001. Right now, I'm doing it one by one. 6. We did a panel discussion with 4 mics. Which means we have 4 transmitters and 2 receivers. When I synced them in the edit. The other panel's voice is a bit loud on one's panel transmitter. So when I synced them together. They kind a give you this flanger effect due to the combined voices of other panel. Is it possible to make the separation of one transmitter to the background noises more prominent? Or this is already included in the noise reduction/cancellation that I suggested? Thanks! Again, these are just ifs. So no hate. I love the product!!
Personally I have noticed very bad signal connecting my mics with my windows laptop, all those inputs on USB-C ports and also with TRSS and I really don't understand Why all persons that have participed on my audiotests, incluiding different platforms like google Meet and Zoom, they noticed kinda distorsion and echoey sound, like any ordinary mic in a streaming, and that was sad. I did some other tests with my AKG Perception 100 and Scarlet 2i2 interface, and Rode W Go 2 couldn't get a decent point of voice definition. Conclusion: useless to expectations. And another thing, last day I was on location, Interior mostly, and over suddenly my ROde started to pick up some annoying Radio Frequencies, we had to stop and repeat a lot of times our recording. SO please I would like a technical reply cause` we tryied to find a way to stop that with desktop app, but you can't. There's no way to know at What Freq rode mics are working in order to switch it and go. Finally We had to wait about 10 minutes, turn off and then start again... :\ I hate to mess clients time. If you want me to do a Review just ask or contact me please!
3 года назад+2
I have noticed some interferences too. This equipment works at WIFI 2,4Ghz, it's not a RF system, so you can't just change the frecuency.
Hi there! Sorry to hear you're having some issues with your Wireless GO II. Make sure that they are updated to the latest firmware version via RØDE Central which you can download using this link: www.rode.com/software/rode-central . If you're still having issues, contact us at info@rode.com and we'll be happy to help you sort out the issue!
@@rodemic thank you so much for the reply! This was totally my bad-I do not have the Wireless GO II, I have the Wireless GO! I've purchased an SC7 cable and am now recording just fine through the lightning jack of my iPhone. Thanks again.
Dear Rode! I have an awful experience with your new wireless go II… I wrote you on email on 18th… still no reply. This is an emergency! Can you please help me!!!! I have terrible noise using wireless go II with my Canon 77D. I’ve seen on RUclips people have the same with ZOOM H6.. and they have to buy a special connector…. But what am I suppose to do? I need your help ASAP! Don’t make me shoot a video about this issue so you can hear me out! Please!!!!!! Seriously!!! There is a huge problem with your new product!!!! I need to use it already and I simply can’t do that!!!!
@@rodemic you know what? Its been 6 days - since you replied.... I replied you back and sthen silence... . I literary can’t believe it! I showed you your faulty equipment.. you know there are more complaints from other bloggers and you simply don’t reply…. Hm… so nice of you. I told you that I have a shooting in the nearest future. I told you I have 2 more days to give it back to the shop - no reaction from you… Sad… didn’t expect that… Ill make a video about your faulty product and how you treat your customers!!! I still can’t believe you haven’t replied my letter yet. You brought out a faulty product and you don't care about your consumers at all!!!!
@@rodemic 6 days after you answered my letter..... still nothing.... 6 DAYS!!!! this is sick! bought your mics - they don't work, you don't reply.... that simple!!!!
Thanks for making this product demo fun with the sfx!
I love this product demo video! Can you make it always this fun!? 😁
THANK YOU!!! THANK YOU!!! nobody even Rode .. nobody explaine how to reconnect them after loos connection! Thank you!
Fun product demo, and using it as an interface is an awesome feature!
Thanks! This got me up and running in about 5 minutes. No need to buy a bunch of other fancy audio gear for zoom calls or live streams.
I'm working on a review on my channel about this equipment and it's a great product, but so far I see a lot of room to improvement:
- Gain control on transmiter or remotely over the receiver.
- PAD button on APP doesn't work.
- Transmiter Start/stop recording control on receiver
- Batch file exporting on APP
- APP on smartphones not only desktop
Can you monitor audio with your headphones for a 2 person interview setup ?
@@deshmukh555555 yes you can. And I recommend you using split mode, so you have both signals independently recorded.
@ Para conectarlo al pc solo lo conecto de usb c a usb a? y funciona?
I agree. Batch export through Rode Central is a must!
@@omargodoy7494 exacto. El PC debería reconocerlo como interfaz de audio. En mi último video lo puedes ver.
Awesome product! Great addition to my setup thanks guys :) keep innovating. Cheers
Thanks! Loving our new mics for our live zoom kids fitness classes!
Thank you very helpful!
thanks for the tips I love my wireless go 2s!!
Great video... Thank you!!! Peace, Love, and Happiness!!!
Very well explained. Thank you!
That was great! thank you! 😀
Are you planning to make these compatible with RODE connect?
I literally just send them a request for that! This would make the WG2 even more functional
Hi. I´m having problems to get to the back up recordings on the TX devices. At de Rode Central aplication for desktop it say that there is no recordings avialable, also it indicates that there is no room for more recordings and if I get into de devices as a pen drive I see the EGG and UGG files, but I cannot use them as an audio file.
Please, help!!
Can't find my recordings :( Where do the recordings store and how do I access them - My Rode central app shows - no recordings available. Nicole
Hi. Which drivers to use? Don't need ASIO drivers?
:)
The RØDECaster Pro II drivers are available now via our downloads link: rode.com/en/interfaces-and-mixers/rodecaster-series/rodecaster-pro-ii#module_25
just what I NEEDED
I have two questions
1.Does it work with any other usb c to usb c cable?
2. Doe ist work with a usb c to usb a cable using an adapter for a macboock (usb c)?
Than you!
Hey there, the Wireless GO II works with many different cables, however we can only confirm that it works with cables we make, such as the SC16 and SC18. The reason some cables work and some don't is because transmitting multichannel audio over USB requires a minimum level of transfer speed.
Hey why can’t I get my audio files? I recorded but not sure where my files are… please suggest… thanks 🙏
Guys! It will be Amazon if we can connect the wireless Go II to the rode connect, so we can use it with our Rode NT mini.
Btw, I love the effects hahahahah it was really funny 🤣🤣🤣🤣
thank you!
Will these last 3 hours on a charge for a podcast?
Sure will!
The Wireless Go II doesn't interface with Windows 11. I need help. The microphone never shows up as a possible microphone input.
Hey there, we'd recommend getting in touch with our Service Team at: rode.com/contact 😊
Thank you I have an email into them as well as commenting on your video. I thought you might have some answers sooner.
is it possible to have 3 receivers (each paired with 2 transmitters) connected to a PC simultaneously, to have mic audio input of 6 individuals on one pc (Obs studio)? or do i need a rodecaster pro2 for this?
Hey there, a RØDECaster Pro II would likely be the best solution, but if you have two Wireless GO II kits, you could plug them both into a computer and use our RØDE Connect software to record them all.
hi! i purchased two Wireless ME kits and 1 additional transmitter. i connected both receivers to the laptop (1 via USB-C. 1 via USB-A). they both show up in rode central (win 11 on high-end MSI vector gp68 HX 12V laptop) and pairing works fine. however, there is only ONE "wireless me rx" showing up in windows audio recording devices. although it wouldnt make any sense (cause rode central shows both of them) i swapped cables, still only 1 showing up.
edit: used an active USB-Hub with USB-C ports on it and it worked. seems like you cant connect the receivers to a PC via USB-C_to_USB-A cable @@rodemic
Love my Wireless Go II! When is the iPhone version of rode central expected to come out?
I don't have an ETA for you, sorry!
@@rodemic Are you guys at least working on it?
@@rodemic When you record audio in real time to a DAW Software such as Cubase / Reaper / Logic in your computer, can you have each of the 2 recorded persons audios in a interview into 2 individual channels inside the DAW ? Will the Go ll driver let the Daw identidy 2 diferent signals?
I want to use 2 sets of rode go II Simultaneously, recording 4 people at the same time ? Is that possible to connect to one mac pro ?
Yes! You can connect 2x receivers to your computer via the USB and as long as you have 4x transmitters this will work well. We recommend using RØDE Connect to manage these inputs: rode.com/en/software/rodeconnect
@@rodemic thanks, so I will order 2 sets of rode go ll - Should I put the receivers roughly 1 or 2 meters apart from each other? Or should I add an extension to one receiver to make the distance possible? If the connect app does not work, can I use adobe audition or any other audio app to record and monitoring multiple people ?
I am frustrated because I still cant figure out how to use my Wirelelss Go pair to record video interviews on zoom. It works when i record myself but when i have a guest, it doesn't. I have watched all sorts of other videos and bought several extensions to try out and still cant get it to work on my MacBook on zoom interviews.
Can you please help and make it clear how i can make it work?
Hey Efi, we'd suggest trying out RØDE Connect: rode.com/apps/rodeconnect here's a great step by step guide for how to use it: ruclips.net/video/oxkjQm4isVk/видео.html
Hey - I cannot find any recordings on my transmitter when I go to Rode Central - but when I record on my computer it works - please suggest how I can find my recordings on my transmitter - is there a switch?
Hiya. I'm getting no recognition of the receiver on my mac book pro (sonoma 14.7.2). How do i get it connected?
Sorry to hear about that! Be sure you are using a USB cable that is capable of delivering audio as some cables such as Apple's are only able to provide basic charge and sync functions. If you require any further assistance, feel free to reach out to our team through here - help.rode.com/hc/en-us/requests/new
Is the super powder included in the Wireless GO II package? 🙂
AWESOME RODE WIRELESS GO II 💟👍
Can you connect the 1st gen Go to the computer as well?
Not using USB - you'll need an interface like an AI-Micro instead.
Hello, I am new here… Great video, btw! I would like to ask, for video podcast with 3-4 people, should I get with Rode Wireless go 2 or Rode videomic go 2? Thank you!! 🙏🏽
can we use this not just as a microphone but also as a speaker when connected to one
I have them connected to pc, with the app and my microphone of pc has the rode mic selected. But i cant record on my pc... There is no setting button next to the battery icon... How do i fix this?
If you're using them with RØDE Connect, you will have a record button
Is there a way to connect two receivers?
Yes! You can plug two recievers into your computer and use RØDE Connect to record with four transmitters at once on separate channels.
kindly give me the link to buy the cable C to C for my MacBook pro. thanks
Any USB-C to USB-C cable should work, as long as it's capable of data transfer. The SC17 is our USB-C to USB-C cable that we can guarantee will work for this - www.rode.com/accessories/cables/sc17
@@rodemic Thansk for the reply. May I request you to suggest me the settings for an interview? e.g what is the best mode ? -DB? etc.Yesterday I used this for an interview as a clip microphone. It works very nice but once I edit I found the voice is very hars/noisy/not smooth to hear. I guess my settings was not proper. Could you please help?
What is the microphone setup used on the subject in this video. Any post processing on the audio
Can we also use sc17 cable to connect rode wireless go 2 with the macbook or android phone devices with usb c type ?
Hi Amit! You can use the SC16 or SC17 to connect the Wireless GO II with USB-C devices!
@@rodemic thanks a lot
Can i connect multiple receiver into mac or pc?
You can connect two Wireless GO II receivers and access all 4 microphones through RØDE Connect!
This works but it is too limiting - I want to use other inputs of my audio interface at the same time, e.g. recording a guitar signal or other sound source. When I try to connect the Rode Go Pro via the TRS cable and a TRS adapter to my Apollo interface, I am getting 0 signal. What am I doing wrong?
Hey there! I'd recommend reaching out to our Support Team and they will be able to give you more information regarding your setup 😊 here is the link where you can reach out - help.rode.com/hc/en-us/requests/new
@@rodemic Thank you so much for your kind answer! I have figured it out as far as the interface goes and it is brilliant!
However, I am still getting 0 signal when I run into my Quad Cortex despite the fact that a SM58 is working just fine. I'll try some more and if I fail, I'll reach out to support.
Latest news is that if I go into the return 1 of the QC it works fine. No idea why the mIn input does not do the job but I am all set now. The one issue is that it feeds back more easily than the SM58 but that has to be intrinsic to using a Lavallier mic I guess.
I own an old 2013 Macbook Pro that has only USB inputs. Is there any way to connect the Wireless GO II with it?
Hey Leandro, sorry for the late reply on this! Yes, you can use the SC18 cable which is a USB-C to USB-A cable 😊
Will these work with the Rode RodeLink Performer Kit?
thanks
What lav mic are you using?
Hey there, Heen is wearing the Lavalier GO mic in this video. You can read more about it here: rode.com/en/microphones/lavalier-wearable/lavalier-go
Awesome & Thanks :)
Hi Rode,
I can connect my rode wireless go 2 with my Mac but when I voice over with it in video editing software ( such as Davinci resolve), the voice over sound is so low, despite I’ve turn it to the highest on the transmitter? Is there any solutions? Thank you!
Our Service Team should be able to help you optimise your settings to get the most of your Wireless GO II using Davinci
I am using for recording audio but it is continuously charging …does it affect battery health ?
Is it possible to use 2 sets at the same time to record 4 people on PC for a livestream or podcast?
I need that exact information too. I need to use 4 rode mics for a podcast
Love this, but I just recommended my client buy the original Wireless Go v1 and we cannot get it to work with her new Macbook Pro M1 version. We've got the SC-7 cable & a Millso USB A to 3.5mm audio adapter. We also have a Millso USB Type C to 3.5mm Adapter, plus a new Hub - Purgo USB C Hub Adapter for the M1 (USB-C TB3 (40Gbps,5K@60Hz), USB-C Data（Data Only), & 2 x USB 3.0,), but cannot get the Rode to work. We've set all the preferences correctly inside the mac, and have tried the Type C with & without the hub, AND with the USB A adapter into the USB A on the hub. Can you help explain exactly how to connect the original Go with the new M1 Macs? I've searched high and low and cannot find anyone addressing this. Maybe it's just me, but I'm failing my client and it's getting weird. :-) Thanks!
Hey! Sorry about the issue getting it to work, our support team can definitely help you out with this, just email them at info@rode.com!
@@rodemic Thank you so much for the quick reply. I'll reach out to support now. Thank You!
I'm having the same issue. Did you find out how to connect?
ayuda tengo el Wireless Go 1 y la app no lo reconoce el microfono lo conecte con el cable tipo C original
I`ve recorded sounds using my original Rode Wireless GO with my desktop and laptop and tablet
since it came out and did not think that it is something special. So what is the big news? Am I missing something?
The Wireless GO II allows you to use the USB-C port as a digital audio output. This is compatible will all computers, not just some.
@@rodemic Okay, this is exactly how I`m using my two the Wireless GO systems. They are working with all my Macs and PCs through USB and USB-C and Thunderbolt ports with no issues. Thank you for reply.✌
ان الجهاز المرسل متوقف على شاشه يظهر بها عباره(wirelessgoll) _ ولااستطيع اطفائه او تشغيله او توصيله على جهاز لابتب _ مالعمل ارجوك ؟
does this work with wireless go 1?
I have bought this set for my Lumix camera, i have connected lavalier stereo mic, but only one channel is being recorded. Is there any way to set transmiter to record or combine both channels?
Sure is! Just press and holding both buttons on the receiver. This will toggle between split and merged mode.
Works like a charm, ty:)
Can I connect RX of Wireless Go 1 to computer directly by using usb-c?
Unfortunately not, sorry! Only the Wireless GO II can be connected to a computer via USB-C.
I would like to add a earphones to hear others in zoom calls in the transmitter end. Is it possible?
This feature would be my dream come true. Than, I would rush to the store to huy one kit for myself. Rode should include earphones to this kit as well.
As there is no audio out socket on the transmitter, you have to connect earphones to your computer - either by cable or Bluetooth.
Why when i connect my wireless go 2 to macbook and already set the volume to the highest, but the sound is slow, i need to bring the mic to my mouth to make it sound loud? Please help
Sorry to hear that! I'd recommend reaching out to Support and they will be able to look into your setup in further detail - help.rode.com/hc/en-us/requests/new
@@rodemic Thank you Rode (T_T)
When I select the go2 receiver rx in Audition, I can only input separate audio from tx 1 and not tx 2. I can input audio when Tx 1 and Tx2 are merged,but nothing from tx2 when separate. Can you help? Do I have a faulty transmitter 2?
Get in touch with our support team at www.rode.com/contact, they'll help you troubleshoot!
Hi, I have one question. I tend to have many video calls per day and can (in a crisis situation) charge the transmitter while using it? Thank you for the response.
Yes, you can use the transmitter while charging it!
Yes, lovely. Buuuuuuuut……where is my Android and iOS app? This is a major reason I purchased it hours after its release, and months later, I’m stuck wondering why I can’t still plug it into my iPad to transfer files.
hello my rode wireless 2 didn't work and when i installed the application on my phone and connect the microphone it was blocked totally then i tried to install the program on my pc he didn't accept any type of windows 64 bits and 32 bits
We'd recommend reaching out to our Service Team if you're struggling with your particular device and RØDE Central: rode.com/contact
I'm already tired of connecting RODE Wireless GO 1 to a computer! What do I need to do to connect it???
You can use an AI-Micro, which is a micro audio interface that allows you to monitor and record audio with your Wireless GO unit.
@@rodemic I was able to connect a microphone to my computer, but the sound is very bad. Tried on two more computers - also bad. Tried on iphone 12 - good. What in this case needs to be done to be good on the computer? Buy a sound card?
@@rodemic I just tried connecting the rode wireless go to my computer with a good $200 sound card, but the output is still worse than when I write through the Iphone 12. Even my $25 USB microphone records better. What do you think. RODE AI-Micro cannot be purchased because there are no deliveries to Ukraine now
Hello, my pairing has failed completely after selecting channel, wifi blinks, press button...totally failed. Any help?
Hey there, best to get in contact with our Service Team and they will be able to help you out on this 😊 Reach them at: rode.com/contact
When i connect my transmitter there is a message that says: there was an error mounting Mass storage, how can i fix that?
Install the latest firmware update with RØDE Central for a bug fix: rode.com/microphones/wireless/wirelessgoii#module_16 . If any ongoing issues, get in touch at info@rode.com!
Does this work for iPad’s as well?
Wireless GO II is compatible with iPads via both the USB-C and 3.5mm outputs :)
I hope there will be a Wireless Go with locking 3.5mm jack soon. ☺️
Check out this blog for a little trick on keeping the lavalier plugged in! rode.com/blog/all/No-Locking-Connector-No-Worries-The-Wireless-GO-Safety-Loop-Trick
Looking for these updates. If possible.
1. Built-In Noise Cancellation or Reduction.
2. Auto conversion of audio to dual-mono during Split-Mode. I don't know if this has to be in Premiere or any editing software or it should be inside wireless go ii. Cause I have to modify the clip inside Premiere in order to get the dual-mono for the two mics.
3. Multiple audio export inside Rode Central. Right now I can only render one at a time.
4. Is it possible to have the transmitter's auto recording to be already rendered like a normal recording from an sd card. So we can just copy and paste it? No need to export?
5. Batch Audio File naming for each transmitter. I am an organized person. And I want to rename all of the transmitter's audio files according to their number. Like for example, TX_01(Transmitter/Mic Number)_REC00001. Right now, I'm doing it one by one.
6. We did a panel discussion with 4 mics. Which means we have 4 transmitters and 2 receivers. When I synced them in the edit. The other panel's voice is a bit loud on one's panel transmitter. So when I synced them together. They kind a give you this flanger effect due to the combined voices of other panel. Is it possible to make the separation of one transmitter to the background noises more prominent? Or this is already included in the noise reduction/cancellation that I suggested?
Thanks!
Again, these are just ifs. So no hate. I love the product!!
Thanks for the feedback, Bryan!
If I were to use this setup to amplify my voice through connected speakers, woudl that work? I think no unfortunately.
It is definitely possible to make your Wireless GO II work with speakers, here's a good example: ruclips.net/video/mhDgT2dYDCY/видео.html
الجهاز لايعمل ..ويبدو انه هناك خلال مصنعي في النظام .._ ماذا اعمل؟
Hey Hussein, we'd suggest reaching out to our Service Team to help troubleshoot this issue with you: rode.com/contact
Apologies if this has been asked. Anyone use these on Microsoft Teams with success? My guess is it should work.
how to connect wireless go in comuputer
Personally I have noticed very bad signal connecting my mics with my windows laptop, all those inputs on USB-C ports and also with TRSS and I really don't understand Why all persons that have participed on my audiotests, incluiding different platforms like google Meet and Zoom, they noticed kinda distorsion and echoey sound, like any ordinary mic in a streaming, and that was sad. I did some other tests with my AKG Perception 100 and Scarlet 2i2 interface, and Rode W Go 2 couldn't get a decent point of voice definition. Conclusion: useless to expectations.
And another thing, last day I was on location, Interior mostly, and over suddenly my ROde started to pick up some annoying Radio Frequencies, we had to stop and repeat a lot of times our recording. SO please I would like a technical reply cause` we tryied to find a way to stop that with desktop app, but you can't. There's no way to know at What Freq rode mics are working in order to switch it and go. Finally We had to wait about 10 minutes, turn off and then start again... :\ I hate to mess clients time.
If you want me to do a Review just ask or contact me please!
I have noticed some interferences too. This equipment works at WIFI 2,4Ghz, it's not a RF system, so you can't just change the frecuency.
Get in touch with our support team at rode.com/contact and they'll be able to give you a hand!
2:11 ahaha naise miss rode.
Does this work with the original Wireless Go?
Unfortunately not, sorry!
Great
i am unable to connect my rode to my dell laptop
MacBook Pro does not recognize Rode Wireless GO II as an audio input device.
Hi there! Sorry to hear you're having some issues with your Wireless GO II. Make sure that they are updated to the latest firmware version via RØDE Central which you can download using this link: www.rode.com/software/rode-central . If you're still having issues, contact us at info@rode.com and we'll be happy to help you sort out the issue!
@@rodemic thank you so much for the reply! This was totally my bad-I do not have the Wireless GO II, I have the Wireless GO! I've purchased an SC7 cable and am now recording just fine through the lightning jack of my iPhone. Thanks again.
I cant install the app in my laptop. It's Windows 10 64bit.
the ending hahaha
Cool
Well, at least you should have made a demonstration for PC users. lol
Dear Rode! I have an awful experience with your new wireless go II…
I wrote you on email on 18th… still no reply. This is an emergency! Can you please help me!!!! I have terrible noise using wireless go II with my Canon 77D. I’ve seen on RUclips people have the same with ZOOM H6.. and they have to buy a special connector…. But what am I suppose to do? I need your help ASAP! Don’t make me shoot a video about this issue so you can hear me out! Please!!!!!! Seriously!!! There is a huge problem with your new product!!!! I need to use it already and I simply can’t do that!!!!
Sorry about the delay, Artyom! I've found your ticket and asked our support team to get back to you ASAP!
@@rodemic thank you!!!
@@rodemic you know what? Its been 6 days - since you replied.... I replied you back and sthen silence... . I literary can’t believe it!
I showed you your faulty equipment.. you know there are more complaints from other bloggers and you simply don’t reply….
Hm… so nice of you. I told you that I have a shooting in the nearest future. I told you I have 2 more days to give it back to the shop - no reaction from you… Sad… didn’t expect that… Ill make a video about your faulty product and how you treat your customers!!!
I still can’t believe you haven’t replied my letter yet. You brought out a faulty product and you don't care about your consumers at all!!!!
@@rodemic 6 days after you answered my letter..... still nothing.... 6 DAYS!!!! this is sick! bought your mics - they don't work, you don't reply.... that simple!!!!
OMG please slow down!
Okay... thanks... for... the... feedback...
If only there was a well defined audio standard BUILT IN to all laptops. Lets call it orange fang
I’d like to know how they sound on zoom
Uff I didn't get good results
In next version, consider batteries user replaceable.
lol
whats her @