I did a little research and I am certainly not a mechanic. My wife God bless her soul decided to go out in the driveway and vacuum out and wipe down the inside of the 2011 Tahoe.. when I got home and started it up I had a service airbag light. I asked her what she did and she basically explain that she raised the seats and push them all the way forward to vacuum under and behind and then move them all the way back to vacuum the front footwell.. one of the videos I found said there is a connector on the driver seat where your right hip would be underneath that becomes loose or breaks and needs a new connector and solder repair.. it may also exist on the passenger side this is for the 07 through 14 GM
I waited. And studied it. Finally found the airbag / ignition fuses num 45 on a 09 Silverado my air bag fuse was blown 15 Amp. My service light off. I'm so happy only 100000.on mine
Funny. Service airbag light comes on and they say don't drive it. Safety issue. Bags won't deploy in a wreck. Well what's the difference in driving an old mid 80s vehicle that didn't have them. Is that a safety issue too?
Hello 1A! Is it normal for the service light to stay on after replacing the sensor? Do you need to clear it/drive for 50 miles or whatever to clear it? I don't have an OBD II that reads the SRS system so I wouldn't be able to clear it. The video shows he cleared the code, but there is no mention if the dash light stays on until it is cleared. Thank you!
Hello, I have a 2009 GMC Sierra, my rear driver side park light not working, the signal, brake are ok, it's the the park doesn't work, can ya give me some tips?
Had a Service Air bag light that came on a 2012 silverado, ran it up to 101 mph and send it airborne and surprisingly the light went out after landing.
I do have access to a scan tool that’s capable but I’m lazy and don’t want to go to the shop to ask a friend to check it out. Is it common for the front impact sensor to fail due to its location? The friend I bought my truck from used to drive on the beach so I feel like it’s more than likely the front sensor due to the salt water and sand
My traction control light and EBrake light keeps coming on and then back off at times stopping my traction control is this from the same problem in ur video?
Okay 1.I love your videos, 2. I just replaced my clock spring and steering position sensor and it worked fine, but I not knowingly I unplugged my Range Technology from my obd2 (because I have a 2011 suburban with DOD) and now the airbag light is on and it seems everytime I turn the steering wheel or hit a bump it pops up the notification on my dash and it's getting annoying
Would you please do the same for a 2006 Buick Lucerne air bag light? Is this a common failure mode, is there only one sensor, and where is it located? Thank you.
+D E Thanks for checking us out! That may or may not work depending on the year of the vehicle. If you don't change the bad sensor then it will come right back if the codes are cleared or battery is disconnected.
hello I have bag light only if someone sits in the passenger seat after it stay on till the car is turned off. I have 2010 Chevrolet Aveo i bought a scanner and got the results of scan and hope you can help me with your understanding of results of data. here it is as follows: code B0081_0F PASSENGER PRESENCE MODULE ERRACTIC/ B10010_0 / SENSEING AND MODULE (SDM) OPTION CONFIGURANTION ERROR # 2 / SUPPEMENTAL INFLATBLE RESTRAINT / FAULT 12 THAT ALL HAVE FROM SCAN HOPE YOU WILL RESPOND SOON
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I don’t see the impact sensor on your website for my 06 gmc yukon xl 1500 does this sensor go by a different name?
I did a little research and I am certainly not a mechanic. My wife God bless her soul decided to go out in the driveway and vacuum out and wipe down the inside of the 2011 Tahoe.. when I got home and started it up I had a service airbag light. I asked her what she did and she basically explain that she raised the seats and push them all the way forward to vacuum under and behind and then move them all the way back to vacuum the front footwell.. one of the videos I found said there is a connector on the driver seat where your right hip would be underneath that becomes loose or breaks and needs a new connector and solder repair.. it may also exist on the passenger side this is for the 07 through 14 GM
+Mr Obvious Thanks for the feedback!
I waited. And studied it. Finally found the airbag / ignition fuses num 45 on a 09 Silverado my air bag fuse was blown 15 Amp. My service light off. I'm so happy only 100000.on mine
Great video. You always explain what you are doing. I always look for your videos when I need to know how to.
Great and informative video. Your info was nicely and thoroughly explained.
Easy to understand.
Thank you much.
🙋🏻♂️The Lord bless you Sir.
Funny. Service airbag light comes on and they say don't drive it. Safety issue. Bags won't deploy in a wreck. Well what's the difference in driving an old mid 80s vehicle that didn't have them. Is that a safety issue too?
Please tell us what scanner you are using. Thanks
Where can I find the front left and right impact sensors for a 2015 Cadillac Escalade? Thanks for the help!!
Can I just connect the 2 new sensors without bolting them back on the frame or do I have to bolt them and then check the light?
Thanks for the video. I have this issue. I'll have to check these sensors out.
What type of scan tool is being used in this video? Thanks.
2y Gracias por su video muy bueno Saludos desde Dallas tx..👏👏👏👏👏
Thanks for sharing this video
Thank you that was very helpful.
Thanks. Great information
Hello I was wondering what brand scanner u were using in the video I'm looking to purchase on thank you
I have one from harbor freight that works wonderful and it scans air bag and abs codes too. For 170 bucks Can’t beat the price and it works great
@@anthonysmith830 do you have an item number or the name of it
Again thanks you so much
Hi nice video!! Do you have a video for the passenger presence module on chevy silverado? Thnks
What was the code scanner used in the video? cost?
Hello 1A! Is it normal for the service light to stay on after replacing the sensor? Do you need to clear it/drive for 50 miles or whatever to clear it? I don't have an OBD II that reads the SRS system so I wouldn't be able to clear it. The video shows he cleared the code, but there is no mention if the dash light stays on until it is cleared. Thank you!
Did you figure this out?
Think I'd be more interested in fixing that check engine light
Right lol
Bet it’s the oil pressure sensor
Check engine light is no big deal. Air bag light means no airbags when light is on, so the airbag light is more important for safety
Check engine light is important in states where inspections are required
Maybe the check engine light is on because the engine isn’t running…
Where can I buy that code sensor detector?
Hello, I have a 2009 GMC Sierra, my rear driver side park light not working, the signal, brake are ok, it's the the park doesn't work, can ya give me some tips?
Had a Service Air bag light that came on a 2012 silverado, ran it up to 101 mph and send it airborne and surprisingly the light went out after landing.
Do you sell the sensor I need the front right sensor don’t see it in your site
+@scowan2003 At this time we do not sell this item through our website.
I do have access to a scan tool that’s capable but I’m lazy and don’t want to go to the shop to ask a friend to check it out. Is it common for the front impact sensor to fail due to its location? The friend I bought my truck from used to drive on the beach so I feel like it’s more than likely the front sensor due to the salt water and sand
+Hill Climber Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
could the light be on bc of the sensors on the seat belt and the seat belt buckle
My traction control light and EBrake light keeps coming on and then back off at times stopping my traction control is this from the same problem in ur video?
I have a 2013 Silverado 2500 LT 6.0 gas. I put a new sensor on but the light is still on. Any suggestions?
Use a scanner to figure out what sensor is actually causing the problem
Okay 1.I love your videos, 2. I just replaced my clock spring and steering position sensor and it worked fine, but I not knowingly I unplugged my Range Technology from my obd2 (because I have a 2011 suburban with DOD) and now the airbag light is on and it seems everytime I turn the steering wheel or hit a bump it pops up the notification on my dash and it's getting annoying
Would you please do the same for a 2006 Buick Lucerne air bag light? Is this a common failure mode, is there only one sensor, and where is it located? Thank you.
+C K We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
Can someone let me know what scanner that is he was using
I replaced the two impact sensors but light was still on. Turns out it was the sensor under the driver seat.
Nice!
I have s 2001 Ford Taurus. I think it’s flashing 3 times and then 2. Unfortunately, i do not have a scan tool,…?
2010 4 Banger Toyota Tacoma engine light and Slippery When Wet light is on
What will cause my 2015 gmc acadia voltage gage to read hi
So I was doing my Inteiror and the guys took of the seat and turned the truck on like that and now the light shows how can I reset it ?
Will it go off…
Or is it disabled?
What is the actual sensor name? I want to get two for my 2001 Tahoe
I replaced both sensors and the light still on. What else could it be that causes the light to stay on?
I just came from a Chevy Dealer to have the airbag sensor recall work done. Light still on and they said there's nothing they can do about it.
I do believe the clock spring in the steering wheel is pretty common. There are lots of videos on utube about replacing it.
Thanks! Can you also clear the code by disconnecting the battery?
+D E Thanks for checking us out! That may or may not work depending on the year of the vehicle. If you don't change the bad sensor then it will come right back if the codes are cleared or battery is disconnected.
@@1AAuto will it pass inspection with airbag light on? I know this varies by state
first you have to check the air bag fuse to make sure that bad sensor
Not the case with my 2022 , if it is a faulty sensor is probably not even there.. best bet is the dealership for me
chevy cobalt 2010 air bag sensor location
Dose anyone know the second code on there and or how to fix it? That’s the code I have.
You're already on the internet, look it up.
Just out of curiosity - will this cause a parasitic draw / intermittent no start?
Mine came on with my sound system …
Mine never came on until the battery died..
I let my tahoe sit for 3 weeks came out n started it,now my airbag sensore came on
I have a passanger seat position sensor code. B0080
Can someone steal a car just by knowing Vin number?
+7atem 25 No it only tells the vehicles information not the owners.
hello I have bag light only if someone sits in the passenger seat after it stay on till the car is turned off. I have 2010 Chevrolet Aveo i bought a scanner and got the results of scan and hope you can help me with your understanding of results of data. here it is as follows: code
B0081_0F PASSENGER PRESENCE MODULE ERRACTIC/ B10010_0 / SENSEING AND MODULE (SDM) OPTION CONFIGURANTION ERROR # 2 / SUPPEMENTAL INFLATBLE RESTRAINT / FAULT 12 THAT ALL HAVE FROM SCAN HOPE YOU WILL RESPOND SOON