I ran across this company awhile back they got some good looking stuff. I ordered a full set of aluminum axles for the trx4 with all the bells and whistles aluminum as well..i'm like a kid waiting for xmas day but for the mail lol..
Cool video. I think that RC has a little more snap to it when u hit the throttle. Before it was like it had a small delay from that drive shaft flexing. I might be wrong. But lord knows I'm used to that. Lol
I believe it has some wear and tear but I also think them landings under throttle that's when it chipped Them few teeth off and actually I seen more than one tooth that is chipped.
Just a off the subject question. Would a leopard 4082 2000kv 140amp on 6s be a upgrade over stock motor. Knowing i will need to gear up a bit for same speed using with a max 6
In all honesty the stock motor does really good, I’ve run the Poseidon and the TP Power motor and although both have way more power and torque, the stock motor is back in the truck now.
@@jj78rcclub lots of options on ebay rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dmfr%2Budr%2Blinks%2Brear%2Bupper%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dmfr%2Budr%2Blinks&campid=5338273090&toolid=20008
As far as getting to the front driveshaft pin, I'd much rather just take the tire off, rather than take the 500 screws out that hold the damn body on. I just put a new front driveshaft in, twisted the stock plastic one right in half. The one I got is steel, not aluminum though. Your probably fine with the stock one of your running 4s, but if your running 6s, you might as well just do yourself a favor and change it instead of waiting for it to break at the wrong time. Cause it will break. Such a nice driveline, then they put that piece of shit piece of plastic in.
I ran across this company awhile back they got some good looking stuff. I ordered a full set of aluminum axles for the trx4 with all the bells and whistles aluminum as well..i'm like a kid waiting for xmas day but for the mail lol..
LoL yeah I know the feeling bud.
Good video, I ordered a GPX front driveshaft. Thank you
Nice and clean upgrade very informative thanks for sharing
I like the traxxas steel dog bone up grade . Just got mine
Thanks . Great upgrade. Exactly what I was looking for.
Cool video. I think that RC has a little more snap to it when u hit the throttle. Before it was like it had a small delay from that drive shaft flexing. I might be wrong. But lord knows I'm used to that. Lol
Awesome upgrade I will have to get this upgrade for mine thanks for sharing brotha!
Click that link in the description
Good info and video, Thanks again for sharing your experience and thoughts ✌😎👍
Perfect ! Very awesome upgrades !
You have to get the gpm servo saver bro i put mine in yesterday and its perfect consistent steering !
Mine is currently locked out so it’s all servo.
Very nice looking driveshaft 👌. But the pinion on the diff....
Yeah but it’s been abused a lot
Thanks for tutorial, just did the same thing, you helped me a lot!!
I have to upgrade mine. Cool Vid! 🤘🤘🤘🤘🤘🤘🤘
yeah for sure, theres a link in the description for it
Awesome vid good sir! Did the twisted front shaft come from 4s usage or 6S?
6S
It snapped with mine on 4s
And thank you for showing
Nice upgrade sweet as
I’m struggling with keeping my motor temps down
Castle mamba x with 1750kv motor + hole in chassis with a fan that gona pull fresh air from top and evacuate hot air side a motor! Gg
Nice. upgrade is fun.
Nice and beefy. Very nice! Bummer about the rear pinion...
The way I’ve beat on this truck I’m happy it lived his long.
I believe it has some wear and tear but I also think them landings under throttle that's when it chipped Them few teeth off and actually I seen more than one tooth that is chipped.
Nice Video!!!
Another great tutorial video for the UDR. Thanks man👍🏿
Beef up one spot find a new weak spot. Just make the last weak spot easy to access.
Sometimes yeah but that rear pinion was badly worn and this just finished it off.
Nice going to get one of those for sure.
Cool, click the link in the description
Just a off the subject question. Would a leopard 4082 2000kv 140amp on 6s be a upgrade over stock motor. Knowing i will need to gear up a bit for same speed using with a max 6
In all honesty the stock motor does really good, I’ve run the Poseidon and the TP Power motor and although both have way more power and torque, the stock motor is back in the truck now.
sir, if you like bashing your rc like that you should try the e Revo 2.0. it's way more durable.
got one, I've had it now for almost 2 weeks and haven't driven it, maybe this week I'll get a chance.
New Traxxas UDR Aluminum A Arms is on eBay for sale right now
Does your stock motor get really hot on 6s?
heat has always been an issue on the udr motor
Do you have the link to the rear upper link?
Stock or aftermarket?
@@ExocagedRC aftermarket
@@jj78rcclub lots of options on ebay rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dm570.l1313%26_nkw%3Dmfr%2Budr%2Blinks%2Brear%2Bupper%26_sacat%3D0%26LH_TitleDesc%3D0%26_osacat%3D0%26_odkw%3Dmfr%2Budr%2Blinks&campid=5338273090&toolid=20008
I use MFR links on mine metalfabbyreed.com/collections/udr
Good video ! But the price for this "plastic car " is a joke ! Same on traxxas !
Sweet video awesome truck love the abuse thank you for destroying your truck's for our amusement
As far as getting to the front driveshaft pin, I'd much rather just take the tire off, rather than take the 500 screws out that hold the damn body on. I just put a new front driveshaft in, twisted the stock plastic one right in half. The one I got is steel, not aluminum though. Your probably fine with the stock one of your running 4s, but if your running 6s, you might as well just do yourself a favor and change it instead of waiting for it to break at the wrong time. Cause it will break. Such a nice driveline, then they put that piece of shit piece of plastic in.
Thanks for tutorial, just did the same thing, you helped me a lot!!
awesome