I'm really leaning toward this as being my first 6S large scale plane, looks relaxing, capable, and easy to transport with the wing setup! Great video as always!
I think it would be perfect for your first 6s plane for all the reasons you stated. I really like that it goes together fast at the field and yes it flies amazing be is smooth and docile or full out aerobatics. 👍
Thanks Carlos! While the Cub and the Draco fly very nice the Cessna 150T gets my vote as I think it has a wider flight envelope. The Draco excels at STOL flying but isn't as aerobatic as the Cub and Cessna. The Cub flies really nice but the Cessna is even more forgiving and capable than the Cub.
We get to see the man behind the sticks. It started with a glimpes or two a few videos back, but now he speaks! 👍 I gotta laugh about "Such a sweet flying plane!"...my guess is you could fly a cardboard box and make it look great.
Nice flying, So i guess yours is totally stock, I read somewhere someone said you could do a prop change and get it to pull out of a hover? I think. I notice it does hover but have to push down out of it. I am thinking about getting one of these. just for a plane to fly low and slow and touch and goes, but i know it also does knife edge and rolls and all well. have you ever gotten a flat spin out of it? Do you know if it has the ability to do Crow mixing? I enjoyed that on my 84" Bushmaster I had
Hi epoweredrc. Yes mine is totally stock and with my "experienced" 6s 5000 30c packs the power is about 1:1. This will be perfect for what you are wanting and it does very nice flat spins. Not sure about crow but you would need to change out the receiver. In reality it lands so slow that you really don't need it unless you just want to mess around with it.
@@michaelclinerc3211 Thanks for the quick reply, I decided after watching your video to order one, excited to get it and mess around, I have a 8 channel smart rx from the bushmaster i might throw in it and just to have crow to play around with. i have some HRB4000 and 5000mah 50c packs i plan to use. I still gotta get some of the 6s smart packs.
I have a question. I can hear the speed control pulsating. Even when you are flying straight and level. Is that you your thumb or is the actual speed control doing it. I know a lot of guys puls the throttle but it sounded like anytime you were at a high throttle setting it was pulsing even in like I mentioned straight and level flight.
OK, I'm glad it's not the speed control. I just asked because I've seen planes burst into flames after a speed control starts going bad and started getting erratic. You still fly darn good for claiming your not as steady as you used to be. Keep the videos coming they are really good 👍.
Thanks Christopher! That is definitely the stock prop. I did mechanically increase the elevator and rudder control throw to make it slightly more agile.
@@michaelclinerc3211 Hi mike. Wich holes did you use on the servohorns and how did you trimm that out. If i go to the farest holes this isnt trimmable anymore xD
@@wozziee4794 Hi Wozziee, I moved the control rods to the outermost hole on the servo arms for both the elevator and rudder. I did have to adjust the clevis on each control surface horn to center them again. The clevises will screw in or out as needed.
@@wozziee4794 The ailerons are still as they come out of the box. Also no changes to the motor thrust angle. I like 6s 4000 and 6s 3200 packs the best.
Toot your own horn much? We get it, you're a good RC Pilot. Your videos are never about the plane, they're about you. I appreciate your skill but showing off is never a good quality
Hi Kevin, thank you for watching my video and your comments. I like to think of my videos as me trying to push the plane to it's limits to see what I can get out of it. Some surprise me by what they are capable of and others not so much. As for showing off I do think I'm a reasonably competent pilot but there is so much more I'd like to learn and there's always room for improvement.
THIS is the video I've been trying to find! I wanted to see the true capabilities! Thank u! Just ordered one
Thanks dsmdriver2588! The C150T is an amazing flying plane and is currently one of my favorites. Thanks for watching!
That was some awesome flying I have the 150 T and I can’t fly it like that yet one day I hope. 👍👍👍👍👍
Thanks Rams! Keep practicing and you'll be flying like that before you know it.
Pun intended indeed :D Great flying as always Mike!!
Thanks!! I wondered if anyone would catch my comment. Totally unintentional and I didn't catch it myself until I edited the video.
I'm really leaning toward this as being my first 6S large scale plane, looks relaxing, capable, and easy to transport with the wing setup! Great video as always!
I think it would be perfect for your first 6s plane for all the reasons you stated. I really like that it goes together fast at the field and yes it flies amazing be is smooth and docile or full out aerobatics. 👍
Nice flying Mike. As usual you make it look so easy. Thanks for posting.
Thanks Bert. We still need to get together and fly sometime soon.
Great Flight Mike, thanks for answering me on the Slowride, You would wring it out.
Thanks warbirds3339mike! Hopefully someday I'll come across a Slowride.
You are the premier test pilot. As always, it's great to see you wring out another plane!
Thanks SanExup! Thanks for watching!
Now that's how you ''Wring Out'' a Cessna 150T👍👍😎😎👍👍
The big Cessna is really a lot of fun to fly.
Pilots got skills. Love the plane also.
Thanks srtguy. It's a great flying plane.
Nice flying as usual bro.👍
Thanks Bro. Still need to get you on the sticks...:)
Ordered one Mike that SALE was too hard to pass on!
You are going to really like it. It’s one of the best flying planes in the E-flite lineup. Be sure to get the floats too!
@@michaelclinerc3211 Totally excited about this one!
Awesome flying, wanted to ask which one do you prefer between the 150T, Cub and Draco? Thanks again for the Content, Carlos
Thanks Carlos! While the Cub and the Draco fly very nice the Cessna 150T gets my vote as I think it has a wider flight envelope. The Draco excels at STOL flying but isn't as aerobatic as the Cub and Cessna. The Cub flies really nice but the Cessna is even more forgiving and capable than the Cub.
@@michaelclinerc3211 very nice, will it flat spin? Thanks
Just ordered this plane as well. Could you share which holes you use on the servos?
We get to see the man behind the sticks. It started with a glimpes or two a few videos back, but now he speaks! 👍
I gotta laugh about "Such a sweet flying plane!"...my guess is you could fly a cardboard box and make it look great.
Thank you for the kind words. Fortunately E-flite puts out such nice flying planes that I just try and make them not look bad.
As for the "man behind the sticks" I decided to try a little intro and see how it was received. Might do more occasionally in the future.
Nice flying, So i guess yours is totally stock, I read somewhere someone said you could do a prop change and get it to pull out of a hover? I think. I notice it does hover but have to push down out of it. I am thinking about getting one of these. just for a plane to fly low and slow and touch and goes, but i know it also does knife edge and rolls and all well. have you ever gotten a flat spin out of it? Do you know if it has the ability to do Crow mixing? I enjoyed that on my 84" Bushmaster I had
Hi epoweredrc. Yes mine is totally stock and with my "experienced" 6s 5000 30c packs the power is about 1:1. This will be perfect for what you are wanting and it does very nice flat spins. Not sure about crow but you would need to change out the receiver. In reality it lands so slow that you really don't need it unless you just want to mess around with it.
@@michaelclinerc3211 Thanks for the quick reply, I decided after watching your video to order one, excited to get it and mess around, I have a 8 channel smart rx from the bushmaster i might throw in it and just to have crow to play around with. i have some HRB4000 and 5000mah 50c packs i plan to use. I still gotta get some of the 6s smart packs.
I have a question. I can hear the speed control pulsating. Even when you are flying straight and level. Is that you your thumb or is the actual speed control doing it. I know a lot of guys puls the throttle but it sounded like anytime you were at a high throttle setting it was pulsing even in like I mentioned straight and level flight.
That is definitely my thumbs twitching. Getting old and i’m not quite as steady as I used to be.
OK, I'm glad it's not the speed control. I just asked because I've seen planes burst into flames after a speed control starts going bad and started getting erratic. You still fly darn good for claiming your not as steady as you used to be. Keep the videos coming they are really good 👍.
Is it the Standart prob? Or did you changed it? Nice flight Michael
Thanks Christopher! That is definitely the stock prop. I did mechanically increase the elevator and rudder control throw to make it slightly more agile.
@@michaelclinerc3211 Hi mike. Wich holes did you use on the servohorns and how did you trimm that out. If i go to the farest holes this isnt trimmable anymore xD
@@wozziee4794 Hi Wozziee, I moved the control rods to the outermost hole on the servo arms for both the elevator and rudder. I did have to adjust the clevis on each control surface horn to center them again. The clevises will screw in or out as needed.
@@michaelclinerc3211 thanks mike simply as it is huh...woozzie
@@wozziee4794 The ailerons are still as they come out of the box. Also no changes to the motor thrust angle. I like 6s 4000 and 6s 3200 packs the best.
Goot stuff for a Rooky.....hahaha
Thanks Dale! Hahaha!
Toot your own horn much? We get it, you're a good RC Pilot. Your videos are never about the plane, they're about you. I appreciate your skill but showing off is never a good quality
Hi Kevin, thank you for watching my video and your comments. I like to think of my videos as me trying to push the plane to it's limits to see what I can get out of it. Some surprise me by what they are capable of and others not so much. As for showing off I do think I'm a reasonably competent pilot but there is so much more I'd like to learn and there's always room for improvement.