2017 - 2020 Buick Regal GS & TourX - Opel Vauxhall Insignia Steering Wheel & Air Bag Removal & Swap

Поделиться
HTML-код
  • Опубликовано: 10 сен 2024
  • 2017 - 2020 Buick Regal GS & TourX Steering wheel and air bag removal
    ALSO I go into the differences with the Opel / Holden / Vauxhall steering wheel and the differences in removal and installation.
    So if you want to swap to a GS steering wheel, OPC / GSi Opel steering wheel.. then this is your video :)

Комментарии • 11

  • @Dark4estImagery
    @Dark4estImagery 2 года назад +1

    Great video. When I finally decide to get a wheel, I'll come borrow your tool.

  • @BLAXAMUXA
    @BLAXAMUXA 4 месяца назад

    Just in case, on Regal it is enough to turn original steering wheel's 6 o'clock just up, and there will be enough space to release the bottom of airbag. No need to remove so many parts

    • @charlesgoin8217
      @charlesgoin8217 4 месяца назад

      I tried and at least on this version it was covered. I could be wrong.. BUT in any case, the covers were easy enough to remove. The whole steering wheel needs to be replaced if your doing a Opel or Vauxhall conversion as the airbag for the Opel/Vauxhall doesn't fit the Buick wheel.

  • @Supernoma
    @Supernoma Год назад

    What was the torque spec for the steering wheel bolt? I'm not finding it anywhere...

    • @charlesgoin8217
      @charlesgoin8217 Год назад

      Actually come off pretty easy as it is splined and not a force fit. So 30lbs give or take will do it.

    • @Supernoma
      @Supernoma Год назад

      @@charlesgoin8217 Thanks! I got it off no problem but wanted it properly torqued as I didn't want to repeat this job (and the steering wheel is a bit of a critical safety item)

    • @charlesgoin8217
      @charlesgoin8217 Год назад

      @@Supernoma thus not go too tight. Otherwise you may mess up the splines. If it were to be too tightly tightened it wouldnt have loctite on it :) 20-30 ft lbs would be safe in both directions

    • @johnjrice
      @johnjrice 7 месяцев назад

      If I'm simply switching one wheel to another it's basically pop off old and then push in new and bolt together?

    • @PAD4BYU
      @PAD4BYU 5 месяцев назад

      Do they have the same connectors can I just swap the hole wheel or do I have to do the bag only?