10:31 so i tried everything seems like your push rod is moving with the train maybe because train is also moving on Y axis. If i turn train around or move any other way pushrod stays because x and z were disabled. Any solution for this? Thank you
Great work,Thanks for the tutorial, what if you want to animate the locomotive instead, i guess you'll have to link all the helpers and geometry to a main helper, but this would make a problem with that helper whose position is locked to the Y axis , ie: if tour locomotive is set to follow a path and have to turn, that helper will continue to move forward, how would you solve such an issue??
@@sk8filmerpoland I have the same problem.... All, and I mean all, "tutorials" on YT only handles the easy 2D rotations (on a flat plane, like pistons or train parts). No one is showing how to use IK Solvers or Constraints in 3D space, with dynamic x,y,z rotations. I will let you know here if I found a solution.
@@peteshannon5194 Thanks for response Pete! hope You'll find a solution, I lookin for it but all I find is complex math scripts with I can't handle at that point
can you give me some advice - I can't make the movement of the engine piston to the connecting rod and the wheel on the locomotive - how would I contact you - thank you in advance
Rewelacja !!! Rzetelne wiedza, swietny przekaz, pomysłowość !!! Jaka to wersja maxa? Czy będą kolejne tutoriale? Byłoby wspaniale, gdyż ten jest świetny.
Thanks for the tutorial. Very helpful. My problem is i have a track that have different Z levels. When you inherit the Z axis it didn't suit the changing level of track's Z axis
Cześć, mam problem z tłokiem, zablokowałem go tak aby ruszał się tylko w jednej płaszczyźnie, niestety kiedy podpinam wszystko do głównego riga element wciąż chce poruszać się tylko w jednej płaszczyźnie, oczywiście kiedy pozwolę mu na ruch we wszystkich płaszczyznach mogę swobodnie sterować rigiem natomiast sam ruch tłoka przebiega błędnie - na wszystkich płaszczyznach, jak rozwiązać ten problem? tutaj podgląd jak to wygląda: ruclips.net/video/UStsIDJANqg/видео.html bardzo proszę o pomoc :)
Błażej Testowałam wiele różnych sposobów, żeby ominąć ten problem, ale zawsze coś było nie tak. Obiekt przylinkowany do innego obiektu nie przekazuje dalej swojego położenia. Jedynym rozwiązaniem jest zlinkowanie tłoka do głównego kontrolera i podpięcie ruchu w osi x przez wire parameters do kontrolera kół z wykorzystaniem sinusa.
@@tedeusz83 I'll put the english translation in the cloud on here if you like,. you donn't need to do anything, I'll send you a msg with the file then if you like upload, I've got a couple of 3ds files need bones, links, dampers and springs. happily call it a trade, let me know Mateusz, kindest regards. Mark
Hello! Thank you for posting it! I wanted to say that thanks to your tutorial, we were able to animate an incredible locomotive for this job we made for a client of ours! I made a point to come back here and, besides saying thanks, share the result with you! Cheers from Brazil!!! /watch?v=1UdABWyNOpY&feature=c4-overview-vl&list=PLkGVRqnDcIQfYFF216gZxZiw0QL7rhj8P
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
10:31 disabling inherit movement makes that part stay in place while train is moving
got same problem, did You find a solution?
Super tutek, sporo przydatnych informacji, dzieki
bardzo dobry tutek, czekam na więcej!
10:31 so i tried everything seems like your push rod is moving with the train maybe because train is also moving on Y axis. If i turn train around or move any other way pushrod stays because x and z were disabled. Any solution for this? Thank you
got same problem, did You find a solution?
Witaj, czy masz może sprzedać lokomotywę Pt-47 wymodelowaną i riigging zrobiony w 3ds max?
Great work,Thanks for the tutorial, what if you want to animate the locomotive instead, i guess you'll have to link all the helpers and geometry to a main helper, but this would make a problem with that helper whose position is locked to the Y axis , ie: if tour locomotive is set to follow a path and have to turn, that helper will continue to move forward, how would you solve such an issue??
got same problem, did You find a solution?
@@sk8filmerpoland I have the same problem.... All, and I mean all, "tutorials" on YT only handles the easy 2D rotations (on a flat plane, like pistons or train parts). No one is showing how to use IK Solvers or Constraints in 3D space, with dynamic x,y,z rotations. I will let you know here if I found a solution.
@@peteshannon5194 Thanks for response Pete! hope You'll find a solution, I lookin for it but all I find is complex math scripts with I can't handle at that point
Thanks. Большое спасибо за подсказку как ограничивать вращение дочерних объектов по осям
can you give me some advice - I can't make the movement of the engine piston to the connecting rod and the wheel on the locomotive - how would I contact you - thank you in advance
Rewelacja !!! Rzetelne wiedza, swietny przekaz, pomysłowość !!!
Jaka to wersja maxa?
Czy będą kolejne tutoriale? Byłoby wspaniale, gdyż ten jest świetny.
Thanks for the tutorial. Very helpful. My problem is i have a track that have different Z levels. When you inherit the Z axis it didn't suit the changing level of track's Z axis
Thank you for the video. Amazing work
muzyka na poczatku ? dzieki z gory
Very Good and useful tutorial
Thanks
Watched it and got the jist of it.
Dzięki strasznie!
Hej Mateusz, mam zlecenie zrobienia silnika , mogłbys polecic jakis tutorial jak zrigować tłoki itp ?? z tym rigowaniem zawsze mam problemy ...
Very Very thanks to you.........
Merci Mateusz..je suis français mais ton tuto est super..même si je ne comprends pas ta langue 😉.. excellent ;)
Thank you
ta muza to tylko taki 'loop' ze stronki w opisie.
thank you so much for tutorial
Cac I get this model?
What....I can't understand enithing. And what is this brum?
Fail army intro music? :D
Cześć, mam problem z tłokiem, zablokowałem go tak aby ruszał się tylko w jednej płaszczyźnie, niestety kiedy podpinam wszystko do głównego riga element wciąż chce poruszać się tylko w jednej płaszczyźnie, oczywiście kiedy pozwolę mu na ruch we wszystkich płaszczyznach mogę swobodnie sterować rigiem natomiast sam ruch tłoka przebiega błędnie - na wszystkich płaszczyznach, jak rozwiązać ten problem? tutaj podgląd jak to wygląda: ruclips.net/video/UStsIDJANqg/видео.html
bardzo proszę o pomoc :)
Błażej Testowałam wiele różnych sposobów, żeby ominąć ten problem, ale zawsze coś było nie tak. Obiekt przylinkowany do innego obiektu nie przekazuje dalej swojego położenia. Jedynym rozwiązaniem jest zlinkowanie tłoka do głównego kontrolera i podpięcie ruchu w osi x przez wire parameters do kontrolera kół z wykorzystaniem sinusa.
looks like a really good tutorial. Please can it be translated in English? Thanks a lot.....
absolutely fantastic, thank you,, I got google to translate for me, it made it so much easier. five stars
Thank You
@@tedeusz83 I'll put the english translation in the cloud on here if you like,. you donn't need to do anything, I'll send you a msg with the file then if you like upload, I've got a couple of 3ds files need bones, links, dampers and springs. happily call it a trade, let me know Mateusz, kindest regards. Mark
oeeefffff i needed this in English -___- i will watch it anyway and try to follow
first of friggin all u should mention what kind of software u r using -_-
It's in the "friggin" title and, written in the first line of the description...Do you even read Bruh?
it was not written when i commented Bruh -_-
THE BIG BAD WOLF Oh...My Bad ..sorry.
Hello! Thank you for posting it! I wanted to say that thanks to your tutorial, we were able to animate an incredible locomotive for this job we made for a client of ours! I made a point to come back here and, besides saying thanks, share the result with you! Cheers from Brazil!!! /watch?v=1UdABWyNOpY&feature=c4-overview-vl&list=PLkGVRqnDcIQfYFF216gZxZiw0QL7rhj8P
I am very glad, that my tutorial helped you, cheers!