Great build I enjoyed the video. I notice some people are being critical of your use of professional workshop equipment. I don’t have all this equipment but love watching their use. It’s still amazing what you can make with just the basic tools. If you have a welder, grinder, drill and basic hand tools you can make something like this. So again, very nice project. 👍😊
How are you going to adjust your top bar away from the edge for thicker metal? Also with the rounded edge on the top bar I notice you are getting a more rounded bend instead of a crisp bend.
The folds are round not crisp and sharp if you put a hard squre agenst the flat bottom agenst the fold edge you would see day light along the top side to bottom edge 😢😢😢
Very elaborate project, not much use really though as not one of them bends is near 90° so no use for doing sharp corner work, the idea of the strengthener on top was good but it stops the workpiece getting to 90° , you can hear it hit several times ,so making any type of container would alway result in sloped sides , sorry but a bit pointless after all your good effort
Tout le monde n'a pas à sa porte un tour, une fraiseuse etc... alors arrêtez de faire le buzz avec des outils qui coûtent moins cher à acheter. Moi j'arrête de regarder la vidéo et je ne mettrais aucun like
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Awesome build. The cam locks make it over the top.
Liking the handles - can you put a link in the description?
Awesome work 👏
Great build I enjoyed the video. I notice some people are being critical of your use of professional workshop equipment. I don’t have all this equipment but love watching their use. It’s still amazing what you can make with just the basic tools. If you have a welder, grinder, drill and basic hand tools you can make something like this. So again, very nice project. 👍😊
Odličan rad. Mislim da ću probati nešto slično
How are you going to adjust your top bar away from the edge for thicker metal? Also with the rounded edge on the top bar I notice you are getting a more rounded bend instead of a crisp bend.
how far apart are the cuts on the angle iron?
Pozdrav iz Srbije ❤
The Best 👏👏👏👏👏
it is not bending to 45 degrees on the 3rd and 4rd side ??
Top tradie
SIMPLESMENTE FENOMENAL...ROBUSTA E PRATICA ...ABRAÇOS..JAÚ SP.BRASIL
Very good...
were can i buy break handles?
This is great!! Wanna try this
Quiero hacerte una pregunta yo tengo una máquina multi proceso la tig-qué gas usa
Man a piece of round stock with an off center hole with a flat piece welded to it woulda been A LOT less work.
Pues hazle una caja metálica a la dobladora con la dobladora.
Tutorial yang baik. Saya mencobanya juga dengan sedikit berberda. Namun ternyata tak semudah menonton vidio
Me gusta boy Acer una igual
La dimensiune ai făcut crestături?
Gracias por el vídeo. Yo hice una casi igual.
videos with the use of High Price Tools - Lathe, Milling Machine, Coordinated Table, etc - are discouraging
But I subscribe and pressed Like
Think about use low price tools
Noted Sir. I’ll be more resourceful next time in choosing the kind of tools i used. Thank you for subscribing, appreciate it.
Simple hand tools will do the job too. Don't need a TIG, lathe or miller. I kind of like that hold down design.
les angles sont mal fermé d'ou buté sur le renfort supérieur !!!!
The folds are round not crisp and sharp if you put a hard squre agenst the flat bottom agenst the fold edge you would see day light along the top side to bottom edge 😢😢😢
Very elaborate project, not much use really though as not one of them bends is near 90° so no use for doing sharp corner work, the idea of the strengthener on top was good but it stops the workpiece getting to 90° , you can hear it hit several times ,so making any type of container would alway result in sloped sides , sorry but a bit pointless after all your good effort
Много лишней работы, видимо мастер хотел показать какие у него станки ещё есть.
Cela devrait être prohibé de faire de machines bricoles avec des outils professionnels, la main c'est la main
You believe in that and he believes in this. Either way both are beautiful traditions. Some of us were only taught with tools.
Имея такое хорошее оборудование, и делать, можно сказать детские игрушки. Не вдохновило.
🤣🤣🤣🤣🤣 espera a ver si sales...y luego ya si eso...
With this kind of professional tools and skill, you could have make better one.Corner accuracy is poor.
Get yourself a water jet cutter, make life easyer.
Tout le monde n'a pas à sa porte un tour, une fraiseuse etc... alors arrêtez de faire le buzz avec des outils qui coûtent moins cher à acheter.
Moi j'arrête de regarder la vidéo et je ne mettrais aucun like