Just been to local gun shop today Ordering one in 2 weeks when he comes back off holiday Fancied one for ages You've just confirmed everything I knew about them Thanks
Heyup Jeremy, I would have a chat with tech at Best fittings, there may be a kit out there, I'm not sure, although if I was going to do that, I'd be looking at the Kral hi-cap valve system & whether it would be viable, you'd potentially lose any warranty though, , cheers, Jon 👍😁
@@jonathanhawke2995 Thanks for that. It was just a thought that occurred to me. I've got the s510 TDR so I'll probably stick with that. Keep the excellent reviews coming. 👍
Hello Phillip, I trade my guns on so I can buy others for reviewing, I find all the rifles I review so I can give an independent review, hope the info helps, Regards, Jon 👍
Heyup silverback, sorry for the delay getting back to you, catching up now, the Hawke range of scopes are very user friendly & good quality, they're also guaranteed for life 👍 the 6 X 24 - 50 front parralax it is an extremely good all round affordable scope, cheers buddy, Jon 👍😁
My kral np02 is low on power around 10.2 with jsb 15.89grain but very good accuracy any suggestions would be greatfull had gun for over a year with no problems
Hello Paul, When you've used around two tins it's leaded in, that's when you'll be shooting at it's optimum. After around eight to ten tins, (4k to 5k) pellets, it can lose power due to build up in the barrel, so it may pay to give the barrel a pull or two, I use a Napier cleaning pack, contains everything you need. If there are small lumps on the blue cloth when you pull it means it's over burden In the barrel, if no lumps then give it a try. The accuracy will be out temporarily after you pull it but it will tighten up again, chrono' to check for improvement, if it's hissing from the rear of the action or the breach, it could be a seal, although a seal would potentially cause a bigger drop, if all else fails, give it a service. I'd be tempted to check if it's still in warranty & get it resolved under warranty, hope the info helps, Best Regards, Jon
Hi I have the same riffle and scope.. you said let's shoot out at 60 to 75 yards. How do you do that as I'm out in my scope at 50 yards. And my zero is 30
Hello Yamyamsam, it's at Celtic Guns Bodmin, not sure how much they've got it on for, contact Bryn at the shop for details, hope the info helps, Best Regards, Jon 👍
Just been to local gun shop today Ordering one in 2 weeks when he comes back off holiday Fancied one for ages You've just confirmed everything I knew about them Thanks
Hello David, we filmed the 50 yd recap at the weekend, no spoilers other than you won't be disappointed 👍💥💥💥👌, Best Regards, Jon
Hello David, thought I'd give you a heads up, I part exchanged the NP02 I reviewed & it's for sale at Celtic Guns Bodmin, Best Regards, Jon 👍
I am thinking About purchasing my first PCP gun.
I have always used springers.
This video has just made my mind up to get this gun
Looks the business great review Jon
👍
Thanks Brian 👍
Great video mate I watch all your videos, can u tell me what diameter your carbon sleeve is what you put on your kral mp02 barrel. Thanks
Do you hunt with your np02 I have just bought one thanks for the video
Nice shooting pal, nifty little rifle for the money, 😁👍
Good little rifle mines spot on
Hi Jon
Really good accuracy.
One question, can the rear bottle be removed for transportation without losing its air?
Thanks. 👍
Heyup Jeremy, I would have a chat with tech at Best fittings, there may be a kit out there, I'm not sure, although if I was going to do that, I'd be looking at the Kral hi-cap valve system & whether it would be viable, you'd potentially lose any warranty though, , cheers, Jon 👍😁
@@jonathanhawke2995
Thanks for that. It was just a thought that occurred to me. I've got the s510 TDR so I'll probably stick with that.
Keep the excellent reviews coming. 👍
Great review. Any particular reason for trading it in?
👍🏴
Hello Phillip, I trade my guns on so I can buy others for reviewing, I find all the rifles I review so I can give an independent review, hope the info helps, Regards, Jon 👍
@@jonathanhawke2995 Thanks.
Hi buddy could you help me out a little thinking of buying this exact scope is it a decent scope ?
Heyup silverback, sorry for the delay getting back to you, catching up now, the Hawke range of scopes are very user friendly & good quality, they're also guaranteed for life 👍 the 6 X 24 - 50 front parralax it is an extremely good all round affordable scope, cheers buddy, Jon 👍😁
My kral np02 is low on power around 10.2 with jsb 15.89grain but very good accuracy any suggestions would be greatfull had gun for over a year with no problems
Hello Paul, how often do you pull your barrel ?
@@jonathanhawke2995 only ever cleaned once .gun shop did not recommend cleaning too often not sure what to do
Hello Paul, When you've used around two tins it's leaded in, that's when you'll be shooting at it's optimum. After around eight to ten tins, (4k to 5k) pellets, it can lose power due to build up in the barrel, so it may pay to give the barrel a pull or two, I use a Napier cleaning pack, contains everything you need. If there are small lumps on the blue cloth when you pull it means it's over burden In the barrel, if no lumps then give it a try. The accuracy will be out temporarily after you pull it but it will tighten up again, chrono' to check for improvement, if it's hissing from the rear of the action or the breach, it could be a seal, although a seal would potentially cause a bigger drop, if all else fails, give it a service. I'd be tempted to check if it's still in warranty & get it resolved under warranty, hope the info helps, Best Regards, Jon
Hi I have the same riffle and scope.. you said let's shoot out at 60 to 75 yards. How do you do that as I'm out in my scope at 50 yards. And my zero is 30
What is the band called for fixing the bipod, and is it plastic?
Just bought one 😅
tested 330 shots from one fill
How much is it muk
Hello Yamyamsam, it's at Celtic Guns Bodmin, not sure how much they've got it on for, contact Bryn at the shop for details, hope the info helps, Best Regards, Jon 👍