How to Replace Front Struts 2008-12 Chevy Malibu

Buy Now!
New Strut & Spring Assembly from 1AAuto.com 1aau.to/ia/1AST...
TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: • Chevy Malibu 2008-2012...
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• 18mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• 36mm Socket 1aau.to/oa/1AAS...
• Large Locking Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oa/1AXA...
• Ratchet 1aau.to/oa/1AXA...
• Socket Driver
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• Liquid Thread Locker
• Rust Penetrant
• Center Punch 1aau.to/oa/1AXA...
• Chisel 1aau.to/oa/1AXA...
• Floor Jack 1aau.to/oa/1AXA...
• Jack Stands 1aau.to/oa/1AXA...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: • Chevy Malibu 2008-2012...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@plgplgplg]

Now this is the way an auto repair video should be made. Subbed. Thanks much

[@georger2239]

Bravo, the best automotive 'fix ir' video I've seen in a long time. No time wasting BS, only quick relevant information.

[@RyTheFly]

I love this channel! I'm currently tackling both front wheel bearing hub assemblies, brakes & rotors. After looking at my front strut assemblies, they are rusted up, in pretty bad shape. So, now that's next on my list of things to-do. 😅 Thank you for all of your awesome videos and information. You make it seem easy enough for the average handy person like myself! Gives me the confidence I need to start the job.

[@TRQ]

+Ryan Bayne Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ

[@danielclawson1590]

Awesome video. Straight to the point and clear instruction. Thank you!

[@luismitchell3063]

Thank you so much for the video. I was having some vibration while driving. Found your video and gave me the confidence to get this done. Well explained without the nonsense. Any weekend “mechanic” can get this done. I went to autozone to get the 36 mm socket. They loaner for a deposit. Definitely would recommend an impact if you have. I have some strength but even then it was hard.

[@annaperez7383]

Seriously one of the best videos I’ve seen thank you and thank you for mentioning the torque specs some are really hard to find but your videos definitely make it easier

[@TRQ]

+Anna Perez Thanks for the feedback! 1aau.to/m/Shop-TRQ

[@dannyzamudio1252]

@@TRQ does it required to get an aligment after replacing struts?

[@lphybridb7]

Thanks so much for the video! Apprecite the details and the "bonks"

[@joew9796]

Thanks for getting to the point people have stuff to do and you understand

[@codypawlowski1711]

Great Video. Always remember to Bonk!

[@1111comment]

sway torque 48ft/lbs, bottom bolts 89 ft/lbs.
Top bolts 18ft/lbs after wheels on the ground

[@jefftrotter8152]

I just recently got my Arm Control and both front Stray bar links replaced at a very reasonable price.Tge reason for both stray bar link replacements is because I drove with a bad wheel bearing so long it caused the stray bar link to stretch scrapping and putting pressure and benting the arm control.That issue is fixed as of yesterday.My car still makes that humming sounds alot quieter than what is was before.Im wordering if it the front Strut that still making the noise even though it's less quiet.

[@cagedracer]

great video.
do you need a front end alignment after changing struts? thank you

[@rivervisual7802]

yes

[@michaelvazquez8717]

Not unless you changed your tie rods.

[@kevindouthit9675]

Great video. I have arthritis and can't do this kind of work anymore so I had to pay an auto shop to replace both struts on my 2012 Chevrolet Malibu. I think they screwed me. Total cost was $923.
$ 501.60 - 2 Struts @ $250.80 each
$219.66 - Strut Labor $219.66
$109.95 - 4 Wheel Alignment
$ 46.93 - Shop Supplies
$ 45.25 - Tax
----------------------------------
$923.29 - Total

[@musclecarsforever]

That sounds about right. They might have used OEM parts if it was a dealer, which are more expensive. Mine were $151 per strut for a middle of the road brand. Not great, but not cheap amazon junk.

[@adrianmejia4997]

I like to pay mechanics like this he work very clean

[@underoath4177]

I should do this to my veerhicle

[@tinamckeage6665]

Awesome video

[@DCR_803]

Give it a few loving bonks…. Bam bam bam!!!!! 😂😂😂

[@cle3755]

Always have issues removing sway bar. End up cutting and replacing. What is the model of the locking wrench. That might help instead of an open ended wrench

[@Ryan-yv1gb]

@TRQ what kind of penetrant are you using? 3:53

[@josephrodriguez7084]

Do you know the exact part number for the mounting bolts and nuts? I think I stripped mine. I have a 2008 3.6L

[@BlackDelta14]

Our 2009 Malibu's front hubs were a 35mm not a 36mm.

[@Esquimalt4Life]

My sway bar link does not line up after taking old strut off it's sitting like 4+ inches too high. New strut matches old strut exactly

[@carloscuevas5658]

Great great great video.

[@finsta74]

Ummmm...I need clarity. Why does this dude keep calling the vehicle a "vericle"?!?!?

[@1111comment]

2012: Sway bar link nut size? Is there a t40 or 8mm there also (saw this in other videos)?

[@1111comment]

needs a t40 and 18mm wrench

[@dennisongeorge2093]

Thanks again.

[@bongznotwarz5637]

I ruined my strut wish me luck no mechanic experience but gonna try lol

[@spammerscammer]

V E H I C L E
There is no R in this word.

[@1111comment]

3:36 Strut stuck

[@1111comment]

top bolt torque 7:00

[@1111comment]

6:23 sway torque

[@1111comment]

6:43 wheel torque

[@1111comment]

bottom torque 6:00

[@KillswitchEngage2010]

~Would Be NICE,
..If It REALLY Only
`Took 7 & 1/2 Mins`

[@brandontibbetts4214]

Didn't use star pattern when removing lug nuts = risk of rotor warping.

[@barryaiello3127]

No, not at all, it's being removed so no chance of uneven torque affecting anything.

[@j.a.r.family2576]

Nascar tire changer????

[@jessevallejo2920]

👍🏽👌🏽🙏🏽