How did you know was your fuel pump bad. I have similar apu and i get ALT code with red triangle. When trying to hook up to the laptop it wouldnt show anything on the tripac evolution software. I get an error.
I knew it was the fuel pump because it would try to start over and over. It would just crank and crank but not start. Also sometimes it would start and sometimes it wouldn't.
@@able_trucking780 I can tell you that it is probably a wire shorting out. Find the wiring harness under the truck and inspect it for shorted wires. Those wires rub against the frame due to the natural vibrations of the truck. After a while, some of those wires get shorted out. Peel back the plastic protective cover on the wiring harness and more than likely you will find a shorted wire in there.
Thank you for posting this!!! You just saved me $200!!! TK wanted $302 for that fuel pump and NAPA had it in stock for $114 including tax!
Glad to be of help! TK is ridiculous
Hey Man, Right on!!...Thank you, just left Napa with the pump...Brother i appreciate that
Thanks driva!!!👍🏾
You're welcome driva!!
Thanks again. Will try install this weekend. TK has a 2 week wait just for service a.d you have to leave the truck...Nope
Amazing. That's why it's good to learn to fix it on your own. Good luck, I'm sure you can do it. It's an easy repair.
I love bro you saved me 😂
@@jesushernandez-fv4dd Glad to help you.
Thanks!
You're welcome
How did you know was your fuel pump bad. I have similar apu and i get ALT code with red triangle. When trying to hook up to the laptop it wouldnt show anything on the tripac evolution software. I get an error.
I knew it was the fuel pump because it would try to start over and over. It would just crank and crank but not start. Also sometimes it would start and sometimes it wouldn't.
Thanks. What's the part number for the NAPA Fuel pump?
Part #: BK 6101034
Thanks
Hope it helped you
@@natcoziay what’s that part number
@@adnanmerdzic6805 Napa Part #: BK 6101034
thank you
You're welcome
Do you haul oversize?
My apu starts runs then turn off then tries 2 start run for 1 min then turn off i hope this is the problem
@@able_trucking780 I can tell you that it is probably a wire shorting out. Find the wiring harness under the truck and inspect it for shorted wires. Those wires rub against the frame due to the natural vibrations of the truck. After a while, some of those wires get shorted out. Peel back the plastic protective cover on the wiring harness and more than likely you will find a shorted wire in there.