I wasn't sure if i could do pm on my APU since it's my first. But thanks to you I'm confident i can. Thank you for that :) Can i please get the filter numbers so i can buy them in advance?
nice video sir thanks run for 5 to 10 minutes and shut down the alternator is pushing 13.9 volts, i just did apm with om parts and still doing that all fuses are good fans both working good, you have idea what else could be?
Hey I did service, put everything back together. I filled new diesel filters with diesel as well. It started and after 1 second shutted down. It’s cranking and won’t start now, Any suggestions ? It was working perfectly before
Great video . How about a brand new evolution how hours should I let it go to do the very first oil change . Should I do it at 500 hrs or still at 1000 hrs . Thanks
Don’t even listen to him he just trying to resale shit, just google all part numbers and buy there or go to napa or orally and match part numbers and you can get much cheaper
hi no power at fuse f17 tripac evolution.when I try to start unit nothing fan comes on under the bed and then red engine light engine sign on controller what could be up with this thing
I just changed my filters and oil today but now I’m getting a yellow triangle showing up on the module after running APU for 5 min. Fan stops blowing air after the alarm comes on. Do you know what might be causing this?
@@dimushallc7512 that's the big fuse in the back.if that fuse is blown I won't get power to the board?only the fuses in the f sockets are not working no power to them
First i will check coolant valve or fan on the precooler radiator on the right side of the Tripac. Also there maybe a air in the Tripac coolant system.
Why is fuel NOT POURING out of your system like it is mine when I change that small filter behind the fuel pump???? Fuel was pouring out when I took that clear piece off now it's leaking!!! Maybe you should warn people about that first. Thermo king says there's no way to stop fuel from coming through the system. How is yours not leaking when you remove it??????????
2,000 Hour Interval - Oil change interval is every 2,000 hours of operation only when using a Thermo King brand oil filter and CJ-4 or better oil. Units with optional DPF require CJ-4 or better oil. • 500 Hour Interval - Oil change interval is every 500 hours of operation when using any other brand oil filter and CI-4 or better oil. Units with optional DPF require CJ-4 or better oil.
The oil change interval has been revised to every 1,000 hours of operation only when using a Thermo King brand oil filter and CG-4 or better oil. The oil change interval is every 500 hours of operation when using any other brand oil filter and CG-4 or better oil. The oil change interval remains 500 hours for all Tier 2 TriPac units that do not use a Thermo King oil filter.
I’m guessing this engine is used for various applications, in some applications oil could be poured on top but it’s not the case for TK APU. However I’ve seen engine being damaged by putting oil on top.
Totally BS this guy doesn’t have a formal shop , If you are a truck driver OTR that means you need to get your apu fixed right away !!! There is no chance to leave the truck for two days come on!!! If you don’t have time to take customer REMOVE THE ADS!! remove the businesses from google! So we don’t waste our time, Driver this guys has no time for your apu maintenance don’t waste you time go somewhere else….
Outstanding Video....
No Music....
No Production.....
Just straight to the Point...
On just How to Get er Done...
EXCELLENT.....
Thank you.....
Short and straight to each point, bravo!
Great video well detailed no excess talking just informative 👍
Glad you liked it!
Followed step by step thank u...
Had a hard time finding filters so I bought a kit from thermoking houston $70
I love your videos my friend, you are saving me a ton of money, thanks a lot.
Молодець Дімуша , дякую і побільше виставляй такі відосіки !
Excellent video! Straight to the point!👍🏿
Wow, very clear and precise... thank you
Thanks
Best video on youtube 🙏 I hope you make more trucking videos in future
Great job sir. Excellent video, no bs just what I needed it
Great information. Thank you!
Thanks for the video bud. Very helpful.
This is What I needed. Quick and helpful. Thanks
I wasn't sure if i could do pm on my APU since it's my first. But thanks to you I'm confident i can. Thank you for that :)
Can i please get the filter numbers so i can buy them in advance?
Go to my eBay store it's has all the filters
NAPA truck shop have them
Awesome video just wish you would’ve had part members.
Now I’m gonna do it ny myself!!!! Thanks!
Thank you for that, if the belt is squealing- how do I tighten?
Very informative thanks for a great tutorial
Excellent video. Thank you.
Good video. Very descriptive.
Excellent....very clear.
Thanks
Very good video, Thanks
Просто и понятно 👍
Спасибо
nice video sir thanks run for 5 to 10 minutes and shut down the alternator is pushing 13.9 volts, i just did apm with om parts and still doing that all fuses are good fans both working good, you have idea what else could be?
Thanks
Thank you you safe me a lot of money 💴👍👍
Glad I could help
Muy buen video 👍
That was very informative thxs
Very good vídeo,Thankyou so much!!!
You are welcome!
Also should you use synthetic after 1000 hrs? Is 15w 40 the best to use?
I use 15w-40 every time
perfect video!
Hey
I did service, put everything back together.
I filled new diesel filters with diesel as well. It started and after 1 second shutted down. It’s cranking and won’t start now, Any suggestions ?
It was working perfectly before
check the fuel pump
Great video . How about a brand new evolution how hours should I let it go to do the very first oil change . Should I do it at 500 hrs or still at 1000 hrs . Thanks
first 500hrs
Nice video thanks 🙏
Hi, thanks for the video. Can we use Rotella T6 5w40? Now when the winter is comming? Or should stick with 15W40?
Just use the same oil that you use on the truck so you have with bottle to keep
5w40 IS THE ONLY OIL YOU HAVE TO USE IN THOSE ENGINES!
Can you get all the filters from Walmart, or auto store? You have really helped thank you for posting this video.
If it is possible , try to use OEM or high quality filters. Cheap aftermarket don't do there job.
Don’t even listen to him he just trying to resale shit, just google all part numbers and buy there or go to napa or orally and match part numbers and you can get much cheaper
الله يسترها عليكم يارب
hi no power at fuse f17 tripac evolution.when I try to start unit nothing fan comes on under the bed and then red engine light engine sign on controller what could be up with this thing
Thank you
You're welcome
Профессионал!!! 😎👌
Спосиба
Thanks 😊
I just placed an order on eBay and subscribed. 👍🏼👍🏼 tell me the oil is 10w 30 diesel???
You can use full synthetic10w30 or I always use 15w40 that's the cheaper one
@@dimushallc7512 ok 👍🏼 thanks
I have a question ?? Where can I find the o-ring that goes instruye small fuel filter ?? The one you didn’t change just clean.
I'm not sure they didn't sell them separate.
Good video
hello brother I have tripac apu I am getting red triangle and eng light what can be wrong with this thing
Did you said change ones per year I heard every 1000 hour but if not by hour how long thank you
ones a year
What are the part numbers for the filters? I have the same apu as in your video. Thanks
www.ebay.com/itm/152969631037
What kind oil should I use?
I always used 15w40, but 10w30 i good too
Does this one have a smaller fuel filter behind the air filter.? Prt# 13-864.?
Not the Evolution One, only older one from 2008 to 2012 Tripac APU
I just changed my filters and oil today but now I’m getting a yellow triangle showing up on the module after running APU for 5 min. Fan stops blowing air after the alarm comes on. Do you know what might be causing this?
I got same prblm hassan...if u don't mind can u tell me how did u fix it ..plz..thnkyu
👍
What kind of power tool are you using to take the screws off the panels.
Milwaukee ratchet 3/8 fuel
thjs
hi I am having an issue with my tripac no power at my fuses on the ecm all the f fuses no power.what could be up with the unit
There is 50 amp fuse inside the APU unit check that one
@@dimushallc7512 that's the big fuse in the back.if that fuse is blown I won't get power to the board?only the fuses in the f sockets are not working no power to them
Hi. How often needs to change oil? thank you
Once a year or 1000 hours
thank you
Good job
Thanks
How much oil did you put?
About 1.5 gal
part numbers for the filters????
www.ebay.com/itm/156178248547
Oil Filter 11-6182 Air Filter 11-9059 Fuel Filter 11-9342
when try to start the apu I am not hearing anything and code comes up on controller
Connect computer and look what code is there?
I have tripac APU 2011 ac it runs about 3 hours and stop with the code eng, are you know what the problem ?
First i will check coolant valve or fan on the precooler radiator on the right side of the Tripac. Also there maybe a air in the Tripac coolant system.
Is 15w40 the oil we should use here?
Yes you can use 15w40
That applies for all models??
TheSmartspirit my local Thermo King rep told me they are using Delvac 15w40 on all of the units they service
I followed all the steps , but when i tried to star the apu. It wont start its showing a fault code ENG. Any advice?? Thanks
What year is the APU?
I will check fuel pump. You can hear it working when APU want to start before starter starts cranking
Gilmar Aljure did you find the problem ?
Need to prime the fuel
I have same problem did you fix
One thing I noticed ur container for diesel is not an approved container.
Do you know which one should I use?
Anyway I can pay you to tell me how to delete emission on my apu?
Yes call me will help you
WHY YOU DOING A 'PM' WITH THE ENGINE SWITCH STILL ON? . . . LOL
because apu is OFF
Why is fuel NOT POURING out of your system like it is mine when I change that small filter behind the fuel pump???? Fuel was pouring out when I took that clear piece off now it's leaking!!! Maybe you should warn people about that first. Thermo king says there's no way to stop fuel from coming through the system. How is yours not leaking when you remove it??????????
My apu won't start
You have to fix it.
Try hitting it with elbow like the Fanze
Дімуша втік в мізурі від нас із Ванкувера !
Thermo King told me it was every 2,000 hrs!
2,000 Hour Interval - Oil change interval is every 2,000 hours of operation only
when using a Thermo King brand oil filter and CJ-4 or better oil. Units with
optional DPF require CJ-4 or better oil.
•
500 Hour Interval - Oil change interval is every 500 hours of operation when
using any other brand oil filter and CI-4 or better oil. Units with optional DPF
require CJ-4 or better oil.
That is for TriPac™ EVOLUTION recommended.
The oil change interval has been revised to every 1,000 hours of operation only when using a Thermo
King brand oil filter and CG-4 or better oil. The oil change interval is every 500 hours of operation when
using any other brand oil filter and CG-4 or better oil. The oil change interval remains 500 hours for all
Tier 2 TriPac units that do not use a Thermo King oil filter.
That is for older APU
@@dimushallc7512 Mine is a 2016 TriPac
Wath happen if you put the oil for top??
you can have engine hydrolock, oil can go into the air port
I’m guessing this engine is used for various applications, in some applications oil could be poured on top but it’s not the case for TK APU. However I’ve seen engine being damaged by putting oil on top.
Put Liqui Moly Ceratec... this engine will last longer
Heads up guys DO NOT REMOVE THAT LAST SMALL FILTER. BIGGEST HEADACHE OF MY LIFE..
Профешшнал, ёпть :)
Totally BS this guy doesn’t have a formal shop , If you are a truck driver OTR that means you need to get your apu fixed right away !!! There is no chance to leave the truck for two days come on!!! If you don’t have time to take customer REMOVE THE ADS!! remove the businesses from google! So we don’t waste our time, Driver this guys has no time for your apu maintenance don’t waste you time go somewhere else….
I like you but you talk like daffy duck. For real
Thank Sr
Thank you
Good job
Thank you