I was good in fixing old crts😢 TV but now I can fix LEDs TV with the help of u Mr Tevz God bless this guy for sharing others they don't thanx a lot again Mr God keep u for a long time Mr thank u
The easiest way for me to resolder a capacitor or resistor to the board is not with solder paste. Remove from one of the pads solder with desolder litz. Place the R or C on the pad with the solder on it and solder it with a regular solder iron. Push the RC down with the pincet in the melted solder. One side is now soldered, solder now the other side with regular solder and solder iron. Job done, better then factory. Btw Nice repair.
Hi Tevz , im watching your vídeos from Country Mexico, city Piza Rica Veracruz, so far far away, thanks for sharing your big knowledge about electronic repairing
I like your educative videos,,I have a Samsung 40"with vertical lines and the pic are bigger than normal,I have tried to factory reset it but the images are still so zoomed,electrician in my area are unable to solve the ensure, would u please tell me what might be the problem
@@tevzTVTevatronics what about the vertical lines that are appearing at the center of the screen,I have tried the method of placing a piece of paper to block ckv and ckbv,as u had explained in your previous video,bt it did work,all power supply on the Tcon are okay,no ic that is overheating,,,how can I solve that problem
Hello. I have a Tv Haier 43' with vertical Green lines. I have try the ckv trick with a piece of paper, but the repair lasted only about 15 mn. How could I repair longer ? Thanks for your videos. It's help me a lot.
Why do you use the ugly solder paste is not good just useleaded solder wire tin the pads with it and use flux you will see you will get a better result. Amtech flux or rosin will do the job too.
You don't use solder paste to replace parts just use leaded solder on the pads with with iron . Solder paste is for reballing chips or in mass production of pcb's in a heat oven.
I was good in fixing old crts😢 TV but now I can fix LEDs TV with the help of u Mr Tevz God bless this guy for sharing others they don't thanx a lot again Mr God keep u for a long time Mr thank u
Glad to help
Thank you for sharing this video, your teaching is so great, so straight and easy to understand. Thanks a lot.
Thanks to.
@@tevzTVTevatronics😊
One of my best teacher..keep sharing such a amazing knowledge and experience..
It's my pleasure
🌷🙏🌷Hari om🌹🙏🌹 very nice video sirji🌹🙏🌷 thank you🌹🙏🌹
The easiest way for me to resolder a capacitor or resistor to the board is not with solder paste.
Remove from one of the pads solder with desolder litz. Place the R or C on the pad with the solder on it and solder it with a regular solder iron. Push the RC down with the pincet in the melted solder. One side is now soldered, solder now the other side with regular solder and solder iron.
Job done, better then factory.
Btw Nice repair.
Sir Tevz. Thank you somuch for sharing your skill at expertise. God bless
thanks very much excellent video you are a excellent professional. 👍👍👍
Master of electronic ❤❤❤
Hi Tevz , im watching your vídeos from Country Mexico, city Piza Rica Veracruz, so far far away, thanks for sharing your big knowledge about electronic repairing
Cool, thanks
I am wondering why your chanel not hit the 1m subscriber yet
Best teacher keep it up bro 🇬🇧
Maybe one day!
Very good information video sir from Sri Lanka kilinochchi
Thks
Greetings sar,am so great For this , Thanks sar, Happy new week, excellent keep up
Same to you!
I love your work Mr.Tevs Tv
slmt master,, always watching and full support video,, god bless po
Thank you 👍
Thank you very much, it was a pleasure to see your talent!
Thank you very much!
sir one,s more vidioe from printer mashion bord repairing sir
Ok coming soon
Thanks for this video... Excelent as always
great master good work ❤❤❤❤❤❤
Thank you and God bless.😍😍😍😍
Gracias amigo tevz por compartir tu enseñanza que buena clase..
Keep
Practicing your doing just fine
Thank you for sharing this video,
Thanks for sharing the video👍
Great video.Thank you Sir
Nice video tevz good job thank you
No problem 👍
❤❤❤Good job
Great! When you going to fix the piano Keyboard?
Its already fixed.
welcome master ❤❤
You're the best man !
Ok bro super 👌 I am Indian
Thanks and welcome
Nice repair. Tkanks.
you are a great master
Thank You very much!!! Peace and good to You!
....SMD Kapasitörler sağlam görünüyordu. SMD 10uF . Siz değiştirdiniz ve TV çalıştı. Arızalı olan parça Nedir. ? 10uF lik SMD kapasitörler mi ?
Thank you my friend
Thank you too
merci pour l info de belgique
GREAT VIDEO...
Thank you!
I like your educative videos,,I have a Samsung 40"with vertical lines and the pic are bigger than normal,I have tried to factory reset it but the images are still so zoomed,electrician in my area are unable to solve the ensure, would u please tell me what might be the problem
may be a software issue.
@@tevzTVTevatronics how can I solve the issues or how can I video chat u,
@@stevohtheeman6161 It is not that easy, upgrading software is not sure to succeed.
@@tevzTVTevatronics what about the vertical lines that are appearing at the center of the screen,I have tried the method of placing a piece of paper to block ckv and ckbv,as u had explained in your previous video,bt it did work,all power supply on the Tcon are okay,no ic that is overheating,,,how can I solve that problem
@@stevohtheeman6161 some lines on the screen cannot be removed, and the panel could be damaged, ckv disconnecting can't solve the problem.
Hello. I have a Tv Haier 43' with vertical Green lines. I have try the ckv trick with a piece of paper, but the repair lasted only about 15 mn. How could I repair longer ? Thanks for your videos. It's help me a lot.
Not all works, some last 3 years, some last only minutes.
Que deus abençoe vc e sua família
Bravo 👏
Is all Tcon boards the brain of the TV
thank you
You're welcome
First like😂
Concertei uma dessa
Süper
Pwede ba gamitsn ng short killer?
👏👏👌👌
🙂❤❤❤❤
Good try
Haruuuu!!!!
hello!
🤩🤩🤩🤩🤩🤩🤩🤩🤩😍😍😍😍😍😍😍😍😍😍
how can know the value of this type capacitor
Why do you use the ugly solder paste is not good just useleaded solder wire tin the pads with it and use flux you will see you will get a better result. Amtech flux or rosin will do the job too.
🇮🇶⚘👑⚘❤
හොදයි
Nice voice🤣
💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙💙
👍👍👍🇧🇷🇧🇷🇧🇷
55uf860v I have similar problems
Thé soldering ...🫣🤣😘😉
De ticher
i have no 12v
You don't use solder paste to replace parts just use leaded solder on the pads with with iron .
Solder paste is for reballing chips or in mass production of pcb's in a heat oven.
Yes, I agree
💝💖💗💓💕❣❤🔥💯🤍🤎💗💗🧡❤🩹
Thanks a lots Master
I love your work Mr.Tevs Tv
I appreciate that
Thanks