Those interested in how to get it to wheelie for the new gen S1000RR, turn off the traction control by holding on to the button on your left hand console that has “triangle and a a circle around it” near the emergency button
Great wheelies man. Can you tell us what all the settings is at in Race Pro 1 to do these power wheelies please? Mine does not lift nearly as easy as that and not at all in second gear.
don't learn with power wheelie; go around 70 kmh; 2gear, and play with access and clutch. do it 2000 times. go slow take your time. I do better wheeling than him;, It take 2 years. no crash.
Traction 2 or 3, Engine 1, and Wheelie control on High wheelie possible.( I recommend not turning it off completely because the power comes HARD on the S1000RR after 8k rpm). Front wheel lifts on 2nd gear after about 8k rpm. Have fun but ride safe.
@@mehdijaichi9533 I had orginally thought power wheelie was a little better to learn with rather than clutch bump because of the abrupt punch of power where rolling back at a speed and rpm seemed a little safer easer to learn with? I 100% agree with practicing it many times.
Guys go on to race pro select either 1-2-3 and then you literally have your DTC wheelie control ! You can keep everything else on and turn that down so I think there’s 3 settings 1 big wheelies 2 small wheelies and 3 you’re not getting it up 🤣
@@radoshopa8736 How are you able to shift to second and third and still keep the front wheel up? I have wheelie control set to 1 which is minimal settings and the dtc -5… Help; it brings the front nose down when i up shift from first
@@S1krr21 @julz22 you have to turn off the traction control by pressing the button on left hand side controls. Looks like a triangle with a circle around it
If you turn everything off it will instantly wheelie. I have full TI Aprokovic exhaust, flaps removed, exh valve deleted, and a race fuel tune. It will pull the tire around 140 😁
Those interested in how to get it to wheelie for the new gen S1000RR, turn off the traction control by holding on to the button on your left hand console that has “triangle and a a circle around it” near the emergency button
But then you turn all electronics off? Only turn it of for straight wheelies then put it back on to do cornering?
I am talking about clutching he
@@S1krr21 yeah it turns off DTC overal incl cornering but its super easy to turn back on. Just hold it again whilst riding
I was wondering why it kept flashing when I was trying to do them
Yeah that doesn’t work.
Super nice video 👍🏼 thank you !! I have waited too long for this
Great wheelies man. Can you tell us what all the settings is at in Race Pro 1 to do these power wheelies please? Mine does not lift nearly as easy as that and not at all in second gear.
don't learn with power wheelie; go around 70 kmh; 2gear, and play with access and clutch. do it 2000 times. go slow take your time. I do better wheeling than him;, It take 2 years. no crash.
Traction 2 or 3, Engine 1, and Wheelie control on High wheelie possible.( I recommend not turning it off completely because the power comes HARD on the S1000RR after 8k rpm). Front wheel lifts on 2nd gear after about 8k rpm. Have fun but ride safe.
@@mehdijaichi9533 I had orginally thought power wheelie was a little better to learn with rather than clutch bump because of the abrupt punch of power where rolling back at a speed and rpm seemed a little safer easer to learn with? I 100% agree with practicing it many times.
are you controlling the wheelie all by yourself or the computer is helping you? and are you always sitting or sometimes you stand up?
Guys go on to race pro select either 1-2-3 and then you literally have your DTC wheelie control ! You can keep everything else on and turn that down so I think there’s 3 settings 1 big wheelies 2 small wheelies and 3 you’re not getting it up 🤣
In che modalità mappa stavi? Dinamic, race rcc..
AWESOMEE
which wheelie mode is that ?
What settings are these? Looks like he is doing a power wheelie and the DTC is in 0…
ruclips.net/video/xOcCgl_PnGg/видео.html yes, it's a power wheelie. I did it on 0 DTC.
@@radoshopa8736 How are you able to shift to second and third and still keep the front wheel up?
I have wheelie control set to 1 which is minimal settings and the dtc -5… Help; it brings the front nose down when i up shift from first
My next bike 👌
What set up do you have ? I do clutch wheelie but the rear wheel just slips
You figure it out?
What is your settings in race Mode?
I can't clutch up wheelie on mine. Bike doesn't let it happen so also Intereated to see his settings
@@julz2267 yeah same!
@@S1krr21 @julz22 you have to turn off the traction control by pressing the button on left hand side controls. Looks like a triangle with a circle around it
@@julz2267I turn off something but the rear wheel slips
@@QuarantaQuattroyou figure it out?
Hold up…. is the computer controlling the wheelie and keeping it from getting out of hand??? 🤯
ruclips.net/video/xOcCgl_PnGg/видео.html after 5:00 , my hand, my mind :)
Do you wheelie with quick shift or manually shifting?
Quick..😊👌
What's the blue on the display under the shift light?
Sticker GoPro... ☺️
Did you change your sprocket or its all stock?
All stock... ☺️👌
stock bike? you can lift it very easily on the back, and someone says that it is difficult to lift
Yes, absolutely stock bike... :)
If you turn everything off it will instantly wheelie. I have full TI Aprokovic exhaust, flaps removed, exh valve deleted, and a race fuel tune. It will pull the tire around 140 😁
Gopro setting?
Is wheelie control on the high setting or tuned off?
Isn't wheelie mode just that it goes into wheelie by itself?