Amazing video 😍 Please advise if I can use your programmer to program a microcontroller that installed in another board. Will I need to install any extra passive component ??
A quem possa interessar, os drivers utilizados são do pacote da ZADIG, caso não funcione tente re-instalar primeiro os drivers originais (Chipset) da sua placa mãe, o windows costuma modificar nas atualizações por isto apresenta erros.
Thank you so much. Do you know whether the old and legendary AT89C2051 can be programmed with that device? It is required to power with a 15 v power supply during programming.
This is the least of the problems....look for it in electronics stores or remove it from cell phone sources or Citzem Bands radios......the circuit board has a factory link in the video presentation.
Olá José Antonio, por favor me tira uma dúvida, depois que vc montou o projeto é necessário gravar algum código no ATmega8 Microcontroller para o equipamento funcionar? Agradeço.
@@mauriciorodrigues9991 , sim é necessário gravar o Atmega com o arquivo hex que acho estar na descrição do vídeo. Também é necessário instalar o driver no Windows para funcionar. Qualquer dúvida faça contato. Abraço.
Oi José Antônio, ´preciso da sua ajuda Pergunta n.1: eu tenho um Arduino Uno R3 com a USB danificada mas o ATMEGA328 já com Bootloader carregado está bom, posso usar ele nesta plaquinha já montada? A resposta é não - tem que ressetar o chip e carregar o Bootloader/USBasp com firmware original do AVR Programmer). Pergunta n.2: Se eu espetar o Atmega8 no soquete do Arduino Uno R3 e instalar o USBasp via conector ICSP, eu poderia carregar o firmware do Bootloader/USBasp original do Atmega8 através dela? A resposta é sim - é desta forma que se faz alterações no firmware do Arduino quando necessário e se domina a ação.
Hello and congratulations on the project! I built the programmer to the letter as per video but Windows 10 does not recognize it, can you help me with the drivers? Thank you.
Brother humble request.. I need best easyly make signal booster because I don't have this knowledge. My location 1 year I'm facing signal problem.... Help me
Hii bro aap hamare lea kisi hero se kam nhi aapke ek reply se hame bhut khushi milti aap one week se koi reply nhi kar rhe agr aap pcb nhi de pa rhe ho to koi baat nhi par ek baar baat to kar sakte ho plz bro reply I am very unhappy so plz kindly reply
Al finalizar el video se muestra un link donde pueden encontrar todo los detalle del programador para si lo desean fabricar, es lo que pude ver. Saludos a todos
Hello. How are you? A great job. I did it, but how do I download the hex file to atmega 8. Please help if possible and contact WhatsApp with many thanks
Nothing relaxes more than a Creative Science video.
finally you are back ....do some projects related to mechanical engineering
😇😇😇😇😇
Which software you have use for pcb layout?
what price of network jammer pcb board
can get the readymade board of this...pls tell me the price
You are back After a long time... 100th like😂 but it already uploaded in few months back...
hi
i have a question
i make this programmer but doesn't work
for programming the main micro control I need another programmer or no
You are back😎😎
Pls make videos regularly
Yes 👍
@@CreativeScience plz bro reply
I am wating your reply
Bro video is very nice...bt i have a question...pls say the software for design this pcb
bro its eagle :)
@@CreativeScience thank u bro...😊
Kya computer ki bios chip es se program kar sakte h
But, how did you program the USBASP onboard ATMEGA8?
From another avr programmer
Its works on atmega16 (40) pin n attiny2313? Tx mr
Is this development board is online available please tell me
Can I program pic microcontroller with this
No, you can watch my previous pic microcontroller programmer video
How did you flash firmware in main ic(atmega8)?
From another avr programmer
you can do it with arduino uno.
@@CreativeScience my programer it not working whit this fuses, can you tell me how to set the fuses correctly for main chip on the board in ponyprog
hello from istanbul, turkey, can you please tell me how atnega8 and 328p fuse settings should be
Welcome back bro
Amazing video 😍
Please advise if I can use your programmer to program a microcontroller that installed in another board. Will I need to install any extra passive component ??
Atmega328p can it be used sir
Yes
Please give firmware link
How do you cut a PCB please make video on that.Please Bro
Here can we use 16MHz crystal ?
one cuestion, this programmer can program Microchip PIC´S?
No This programmer only for avr , for pic microcontroller check my previous pickit2 video
After big time ☺️☺️
hmmmmmm :)
The form programing is SPI ?
Sir time leg fuse ki jagah or kon sa fuse use kar sakte h plz help me
You can use simple jumper
@@CreativeScience thanku very much
No thanks 😊
What are you studying and which college?
Is kit ka use kaha hota hai bhai?
Microcontroller program karne ke liye
@@CreativeScience Just like Arduino.
Please make a tutorial video on how to program pic 2550 microcontroller
What drivers to use for Windows 10? The device is not recognized! Thanks.
A quem possa interessar, os drivers utilizados são do pacote da ZADIG, caso não funcione tente re-instalar primeiro os drivers originais (Chipset) da sua placa mãe, o windows costuma modificar nas atualizações por isto apresenta erros.
Thank you so much. Do you know whether the old and legendary AT89C2051 can be programmed with that device? It is required to power with a 15 v power supply during programming.
You can't forget...only components for 5V
Where do we get the PCB, and what software do we use to program the microcontroller?
Leia os outros comentários....
Very nicely soldered..
Which software used to edit video, 😊?
Final cut pro
Sir plz reply aapne send kar pcb plz reply sir
What happens
Are you ok
Any Videos for pickit 4 support mplab x ide
I need circuit and programmer like this
What is use of this circuit
Programme in avr microcontroller
Caramba......este não entende nada de nada...
Bhi boat ka size kiya hai bhi
Great video,which software you used for flashing?
“AVRFuses” but it developed only for macOS windows version not available.
@@CreativeScience thnk you bro...plz put video on other windows supported boards,how to program ics on that ....
Okay bro 👌🏻
@@CreativeScience 👍
I don't found 470uh inductor. Plz sir equal comments? I also want buy pcb.
This is the least of the problems....look for it in electronics stores or remove it from cell phone sources or Citzem Bands radios......the circuit board has a factory link in the video presentation.
Hello and congratulations on the project! I would like to know which software do you recommend to use for Windows 10? Thank you.
AVRdude GUI
@@CreativeScience Thank you!
No thanks 😊
@@CreativeScience thanks
Can't you just use your Arduino board to do the same thing?
bro, how should the fusebit setting be, can you help me please
I have a same problem. And I can't install driver on windows 10
Which software do you use for burn Microcontroller?
If he doesn't respond, we respond, just read the comments... don't be lazy... the project works perfectly.
I use eXtreme Burner AVR V 1.4.3
Pls.Can you give a pcb?
Please can you give me a programmed pic18f2550 for making universal microprogrammer. Please help me out.
I have extra boards from my order if anyone is needing just one :) I am in the USA though, so not sure on shipping costs.
😂
I need one
Construí esse gravador seguindo o projeto. Funcionou perfeitamente.
Obrigado por compartilhar esse projeto. Parabéns!
(Agudos, SP, Brasil)
Olá José Antonio, por favor me tira uma dúvida, depois que vc montou o projeto é necessário gravar algum código no ATmega8 Microcontroller para o equipamento funcionar? Agradeço.
@@mauriciorodrigues9991 , sim é necessário gravar o Atmega com o arquivo hex que acho estar na descrição do vídeo.
Também é necessário instalar o driver no Windows para funcionar.
Qualquer dúvida faça contato.
Abraço.
Tambem tenho uma pergunta: sera se da pra programar o 8051 (AT89C251) com esse programador? Abracos da Polonia.
Oi José Antônio, ´preciso da sua ajuda
Pergunta n.1: eu tenho um Arduino Uno R3 com a USB danificada mas o ATMEGA328 já com Bootloader carregado está bom, posso usar ele nesta plaquinha já montada?
A resposta é não - tem que ressetar o chip e carregar o Bootloader/USBasp com firmware original do AVR Programmer).
Pergunta n.2: Se eu espetar o Atmega8 no soquete do Arduino Uno R3 e instalar o USBasp via conector ICSP, eu poderia carregar o firmware do Bootloader/USBasp original do Atmega8 através dela?
A resposta é sim - é desta forma que se faz alterações no firmware do Arduino quando necessário e se domina a ação.
Não só chip Atmega
Can you make voice recorder device?
TE5 TIME LAG FUSE KA VALUE ?
It’s not necessary, you can use plain jumper.
Which AVRs can be recorded with this recorder?
Most
Which software U R using here????👍👌😎✌❤❤❤❤❤❤❤❤
final cut for video edit and eagle for pcb designe
@@CreativeScience Brother video is just awesome n fabulous
@@debasishsaha7428 :)
Bro 👋
Very nice and useful bro
Upload to ECE new project works
Does it program Pics?
No, it’s only for avr
Hello and congratulations on the project! I built the programmer to the letter as per video but Windows 10 does not recognize it, can you help me with the drivers? Thank you.
As far as I know, you need to input VENDOR ID: VID, PID first after production, but strangely, there is no such explanation in these videos.
Bhai kya huaa aapne pcb nhi bijwai na hi koi reply kar rhe ho yrr
Plz reply aap pase le lo yrr 1 pcb or mai parcel ke bi de dunga or batao aap but plz 1 pcb de do
@@BABATECHNICALKNOWLEDGE Do you need a PCB?
Nice Utpal Da
thanks :D
Great full ideas and cool content
Thanks 😊
boss Programmer Software (for Windows Users) ?
AVRdude GUI
sourceforge.net/projects/avrdudegui/files/
@@CreativeScience ''BOSS'' AT89s51/52 microcontroller not found ?
You can use “Khazama AVR Programmer” software
@@CreativeScience ''BOSS'' “Khazama AVR Programmer” AT89s51/52 microcontroller not found ?
Sir can you put vedio about learning programation of ship ( metal detector programation)
Thank you sir for making this video it's very helpful 🙂
It’s okay, No thanks 😊
Brother humble request.. I need best easyly make signal booster because I don't have this knowledge. My location 1 year I'm facing signal problem.... Help me
Bro ab to bej do pcb aap reply bi nhi karte ho
after long day,, you uploaded viseo
Yes
Bro aapne kar diya pcb ko courier
Plz reply bro
Plz reply bro
Kya huaa bro aap reply nhi kar rhe ho plz reply
Hii bro aap hamare lea kisi hero se kam nhi aapke ek reply se hame bhut khushi milti aap one week se koi reply nhi kar rhe agr aap pcb nhi de pa rhe ho to koi baat nhi par ek baar baat to kar sakte ho plz bro reply I am very unhappy so plz kindly reply
Kya huaa bro plz reply
is it really fast...?
BOSS Firmware (usbasp.atmega8.2011-05-28.hex)
atmega8
Loaded but USB Not work on computer, Please help me ''BOSS''
thank you sir, i need programmer for motorolla 68hc11e9 please help me
Amazing video
Very nice project brother you are the best
Thanks bro 😊
Al finalizar el video se muestra un link donde pueden encontrar todo los detalle del programador para si lo desean fabricar, es lo que pude ver. Saludos a todos
yes, you are right
Hello. How are you? A great job. I did it, but how do I download the hex file to atmega 8. Please help if possible and contact WhatsApp with many thanks
is it really fast...? 👍👍👍
Very nice bro your experience
Sir 500 Watt simple inverter plz
Excelente video saludos desde Bolivia
thanks :)
Nice Video 👍👍❤❤
😂
Nice and so many thanks and relay appreciate with this project..
Thanks 😊
@@CreativeScience could you share the raw file PCB Layout, Silkscreen, Schematic and Gerber File as attached please? I mean the editable file.
Did you want eagle .BRD file?
@@CreativeScience yes exactly, please.. i will open in eagle or proteus.. Thank you..
Contact me on fb pages
Bro I miss you
pH no
Emergency lamp please
Okay, I will try 😊
Very good
Thanks bro 😊
plase,, make Dc to Dc booster
مبدع 👍
Very Nice Bro.......
Hi
thanks bro :)
What is the purpose of this video ?
O objetivo do video é vender placas de circuito impresso porque não funciona, não tem driver par este circuito...
Perfect work i like it
thanks :)
you told me that you will give me voice recoder pcb but till not given pls give me bro i also given you the address and all
Hii kase ho bro
Superb bro
Thanks 😊
Great full ideas hi
Sir...please make the siren tones ambulance or police like WHELEN LANDUN OR SENKEN Please 🙇🙏🏻
Regards from Indonesia
Great video though. Thanks for sharing it.
thanks :)
Good video
thanks :)
Bro make a lithium ion battery capacity tester
Parabéns. Não é pra qualquer um.
/support programming atmega32
Very nice
Thanks 😊
Good ❤
Thanks
Plz reply bro