Your video is even better than the TANDEMKROSS instruction video! Also, I noticed you’re running a Streamlight TRL. When I was still Police Officer (JUST Retired, thank you) we also ran Streamlight TRLs on our Glock 23s. Every now and then, someone would get a failure-to-feed. We found that putting in a stronger 10-coil mag spring solved the issue. Obviously, you can’t do that here. But, if you want to settle for putting only 20 rounds in the mag, that may help as well. Great job with the video!
Prior to purchasing two +9 magazine extensions I had eight 16-round magazines that actually held 16 rounds. All of these magazines worked flawlessly. After installing the magazine extensions one magazine would hold 25 rounds while the other would only hold 24 rounds. During firing these magazines would fail to feed, constantly. I would disassemble, clean, and reassemble to no improvement. No other magazine had issues during this time. Finally, After only a few trips to the range the spring for the magazine holding 25 rounds failed. It would no longer push the follower to the top of the magazine feeding the last two rounds. Upon disassembly the spring had an extra bend, one that is quite severe. I have contacted Galloway precision, but they refuse to return the product or refund my money.
I use them on all my mags, I did get a piece from them that they just designed to go under the follower so the last round doesn't nosedive. It seems if you keep the mags loaded to capacity that the springs weaken some and they require this shim to help counteract the issue. If you are in the TX-22 owners facebook group you'll see my posts and what I am talking about.
Wingman kit comes with 2 small semi circle with a flat side ring that comes with it... what's the purpose of these? You didn't I stall them in the video
These wouldn't run at all for me. I polished everything up, used the little spacer they include, the rounds wouldn't present anywhere near properly in 4 different mags i tried.
What holster exactly are you running for the tx22 with the streamlight on it. Just bought one and would like to do the same! If you can link the exact one that would be much appreciated! Or even better to make a quick video of it!
Problems- I upgraded 2 16 round magazines that worked perfect . With the extension on Im getting jams with both magazines on the 2 or 3 round. Have lost several speed shooting matches due to these extensions. When I swap with 16 round OEM magazine the issue goes away . I would NOT recommend this product
Man I love this TX22. It deserved the 2019 pistol of the year it won. And thanks for the info brother, I will be getting a few of these for sure.
I do have one now and you definitely appreciate the TX 22 more when you have a WALTHER P22.
Thank you for providing the great angles.
Great video Taurus is having an awesome sweepstakes giving away some of these this week, I was lucky enough to get my TX22 before the gun run.
Your video is even better than the TANDEMKROSS instruction video! Also, I noticed you’re running a Streamlight TRL. When I was still Police Officer (JUST Retired, thank you) we also ran Streamlight TRLs on our Glock 23s. Every now and then, someone would get a failure-to-feed. We found that putting in a stronger 10-coil mag spring solved the issue. Obviously, you can’t do that here. But, if you want to settle for putting only 20 rounds in the mag, that may help as well. Great job with the video!
That's impressive when you consider the bulk of a 25 round 10-22 magazine.
Prior to purchasing two +9 magazine extensions I had eight 16-round magazines that actually held 16 rounds. All of these magazines worked flawlessly. After installing the magazine extensions one magazine would hold 25 rounds while the other would only hold 24 rounds. During firing these magazines would fail to feed, constantly. I would disassemble, clean, and reassemble to no improvement. No other magazine had issues during this time.
Finally, After only a few trips to the range the spring for the magazine holding 25 rounds failed. It would no longer push the follower to the top of the magazine feeding the last two rounds. Upon disassembly the spring had an extra bend, one that is quite severe.
I have contacted Galloway precision, but they refuse to return the product or refund my money.
I use them on all my mags, I did get a piece from them that they just designed to go under the follower so the last round doesn't nosedive. It seems if you keep the mags loaded to capacity that the springs weaken some and they require this shim to help counteract the issue. If you are in the TX-22 owners facebook group you'll see my posts and what I am talking about.
I saw that. I havent had a problem with mine so far but I rarely leave them loaded. Thanks for watching.
Just put some of these on my 10rnd mags they will hold 14 now. Good stuff.
I’m only getting 20 rounds in mine. And mine came with another plastic piece to put on the part where the rounds sit.
Very cool man!
Thanks n8. Great job. Good info.
Glad you enjoyed it. Thanks for watching.
Wingman kit comes with 2 small semi circle with a flat side ring that comes with it... what's the purpose of these? You didn't I stall them in the video
I did not know about these mag extensions! Lets see how they do👍🇺🇸
So far so good. No complaints so far.
@@n8sguntalk yes sir, looks like a winner to me👍🇺🇸
Solid review!
What ammo you shooting? Aguila?
Yeah here I believe it was all aguila.
Thanks!!
These wouldn't run at all for me. I polished everything up, used the little spacer they include, the rounds wouldn't present anywhere near properly in 4 different mags i tried.
Do thsy have diffrent color options then black?
I dont believe so.
What about the load assistant? Do you no longer have that.?
Unfortunately with any of the tx22 magazine extensions you do lose that feature.
GOOD video. could someone make a 20 round extension or is there a limit to what's possible?
I'm sure. Galloway precision makes a +9 extension to bring the capacity up to 25+1. I have a video on it here on the channel. It's comically big.
You should contact tandem cross for the shims.
I did.
ruclips.net/video/Zt_DRD405QM/видео.html
THIS IS GREAT SITE
What holster exactly are you running for the tx22 with the streamlight on it. Just bought one and would like to do the same! If you can link the exact one that would be much appreciated! Or even better to make a quick video of it!
It's made by TR holsters. Its actually made for a glock 34 with a streamlight tlr1 but the TX22 fits it well also. Thanks for watching
n8sguntalk I hate to be a pain but do you know the exact model for the glock 34 I would really hate to buy something that doesn’t work
@@starrmclaughlin7544 trholsters.com/glock-34-gen5-kydex-holster/
n8sguntalk I appreciate it! It sounds like it had a decent amount of retention and good enough to have solid practice with!
@@n8sguntalk The page link is dead now guess they dont make it anymore. I was gonna buy one.
Interesting you don't put a link to purchase the extension.
Google is your friend
Where did you get the blacked out rear sight? Love the review. Will need to get a couple.
It's the factory rear sight. I blacked it out with a sharpie.
Do you think it would work for the 10 round magazine?
I would think it would but I haven't tryed it personally.
Just picked up the TX-22. I will be getting these mag extensions. Thanks for the info.
Glad to help. Thanks for watching
Awesome thanks for sharing do you have aftermarket sights if so what company makes them 😀🤘
ruclips.net/video/IBCOUdN-Byw/видео.html
Don't you have the compensator from Tandemkroos? Did it work?
I haven't tried that.
@@n8sguntalk I had one on my Walther and it worked veeeery good.
Compensator for a 22🤣🤣🤣🤣🤣🤣😂😂😂😂😂😂.
How is the TX holding up? How many shots have you shot with it so far ?
I have over 13 thousand down range so far.
I see a threaded barrel in this TX video. Have you tried a suppressor yet?
Some yes.
I run my liberty Mystic X and it workds great
What thread protector do you have on there?
🙎♂️ I'm honestly not sure it was just a extra I had laying around
Do you kno if this kit works with the 10rd magazine?
Not 100% sure but I would say yes.
@@n8sguntalk cool
Awesome video tho 👌 🔥🔥
I could only get 4 additional rounds in my magazine. No way could I fit another round in it. But hey, 20 is better than 16!
Thanks
does anyone make larger mags or extenders for Ruger SR-22? thanks!
Tandemkross does. But I have never tried them personally.
@@n8sguntalk THANKS!
Just wish spare mags were available!
Problems- I upgraded 2 16 round magazines that worked perfect . With the extension on Im getting jams with both magazines on the 2 or 3 round. Have lost several speed shooting matches due to these extensions. When I swap with 16 round OEM magazine the issue goes away . I would NOT recommend this product
5:15
Wow that extender looks really HIDEOUS ....
You got one on backwards 🤣
How so?
I order 2 packs
NO SPEED LOADER!
Thanks
where did you get that thread protector?
I'm honestly not sure. I have several extras