Woodys you done a bloody good job with algoforce e1500, if people can't get it in their heads you are only just trying and it.And seeing what it's like for a reasonable price detector from warren old tin pan.
Dear sir i require your expert opinion on a project I'm working on. Its a coil for Nokta detector velox one induction balance, I need to know what type of cable is used for coil, it has a GX12 5 pins connector and according to x-ray cable could have only 4 cables inside or could be 5 not sure please advise.
There are two camps on this detector, some think it’s good and others think not so good. Their are non affiliated people using the detector and commenting, other detector brand sellers have a vested interest, those that are dealers for this have a vested interest, my position is to sit on the fence until more feedback comes in, my comments may skew peoples views and I have not tested the E1500 on hot ground so until I do I should not second guess.
Depends, the pinpoint ID will give a bouncy target ID on some messed up odd shaped iron, but if its a nice round bit or something like that, it will come up just as stable as any other ID on it, it's very different to the iron blanking with a DD on the GPX 5000. If there is an area riddled with a type of nail for example and they come up a certain ID, then you could use that to cherry pick other targets with different ID's.
Ok woody thank you I'm also planning to get one of the e1500 but there's no stock I'll be on vocation on march in visayas I hope they will have it soon
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
Woody , you are God in the modification world in my opinion. Cheers.
Woodys you done a bloody good job with algoforce e1500, if people can't get it in their heads you are only just trying and it.And seeing what it's like for a reasonable price detector from warren old tin pan.
Thank you woody for keeping yr comments respectful, towards me, I appreciate that👍
Good Work woody your the man for this job
Thanks 👍
Thanks woody
Good things come to people who wait
lots and lots of ferrous targets will give u the same ID numbers as gold,in highly mineralised ground, that is a given
Dear sir i require your expert opinion on a project I'm working on. Its a coil for Nokta detector velox one induction balance, I need to know what type of cable is used for coil, it has a GX12 5 pins connector and according to x-ray cable could have only 4 cables inside or could be 5 not sure please advise.
I do not have any information on the velox detector
Hi there woody, so what was yr final conclusion on the Algoforce E1500, I notice all the chitter chatter went quiet pretty quickly, thanks
There are two camps on this detector, some think it’s good and others think not so good. Their are non affiliated people using the detector and commenting, other detector brand sellers have a vested interest, those that are dealers for this have a vested interest, my position is to sit on the fence until more feedback comes in, my comments may skew peoples views and I have not tested the E1500 on hot ground so until I do I should not second guess.
Woody, does the vdi indicator give a reasonable indication of iron and maybe be a substitute for the dd-coil iron disc seen in the ML units??
It depends on how I test , the hot rocks that I have all indicated 00 but I have not tested for in ground iron.
Depends, the pinpoint ID will give a bouncy target ID on some messed up odd shaped iron, but if its a nice round bit or something like that, it will come up just as stable as any other ID on it, it's very different to the iron blanking with a DD on the GPX 5000. If there is an area riddled with a type of nail for example and they come up a certain ID, then you could use that to cherry pick other targets with different ID's.
Try the device on the file you made, 35 inches
Hi woody I'm interest to get one it seems like a very good detector for the price when do you think they are going to have it on stock again ?
And just want to know about the progress of my detector nokta makro I'm in no rush I know your a busy man .I just want to fix it the right way .
I think this would be perfect for your location, I might bring one over to Camiguin.
I’m getting there, it’s on my bench.
Ok woody thank you I'm also planning to get one of the e1500 but there's no stock I'll be on vocation on march in visayas I hope they will have it soon
The next batch is meant to be late February so not far away, might want to put your name down as I'm sure it will sell out.
Türkçe altyazı lütfen
I have no idea on how to do that.
Woody wants the new detector like mate?
Just another detector.
@DetectorMods So are there any others coming soon? As 6000s are going out of warranty and need to replace them?
There is but cannot say too much right now, even ML are out testing some new device.