Easy learning, Mach3 Basic tutorial machine work area Configuring.
HTML-код
- Опубликовано: 16 сен 2024
- 79 A Basic tutorial of Mach3 machine work area Configuring.By Australian Inventor Roger Clyde Webb
Disclaimer:
These videos and commentary are intended for entertainment and inspiration. Woodworking and metalworking is dangerous. Always seek professional advice and training before using any power tools or CNC machine. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw it in one of my videos.
youve solved one of my issues, My table was far too large on mach3 and kept going passed limits. how would I centre the artwork? thank you
thank you this vid helped me alot with my mill
Thank you very much
thanks
Need sensor install in rotary yes or no
Hi, NO! you don't I have a video for you.
ruclips.net/video/QMMdd309I2U/видео.html
Roger webb how can I contact you sir good day
you never explained how is it that you scaled the eagle to fit on your bed? i used the road runner example and when i load it its VERY small i cant get it to be as big as my bed.
Franks Hots
G’day, I’m glad you like my video and thank you for your
comments and watching, it all helps me to improve my channel. See my video 78. Roger Clyde Webb Australia ; ))
seemed like he zoomed in with the mouse wheel altering the field of view on the simulation monitor, i don't think it scaled the job down altering it's x an y values, which is what I'd like to know is possible or not, and if so, how.
Hi there Roger. Thanks again for all your videos. I have done all what you show us, and great it all worked well, until now.
Today I wanted to engrave some words and wierd thing happened, the first letter was fine but each next letter went deeper and deeper in the material. I had set all the letters to be engraved in the same depth. Maybe you know what could be the problem? Could it be the machine? I have calibrated the axis several times and it goes correct. Please please help if you know what could be the problem. Thank a million.
How did you jog the display to get it on the bed?
Hi, press regen
@@rogerwebb9600 hi good day sir how can I contact you
Hello how can change speed in feed rate after +10 about i want 16 speed , how can i change that ,because if you push + or - after 10 ...he always goes +20,+30,+40,+50.....but i want example 37, where a can type that on keyboard .Thanks
Would this program work for any Cnc machine ? I have one from China and I can’t get the software that it came with installed so I was wondering if I can get my Cnc machine running with this ?
Yes! BUT, see my videos 77, 78, 197 and 198.
Thank you, for watching,
Please subscribe and forward the video on to a friend, Australian Inventor Roger Clyde Webb ;-)
Good day, I have a problem with the travel in the cars of X and Z on a lathe, I adjust them in settings and in mill I move them and they run the distance with precision. but on turning I move it .1 "the X axis and it moves .210" and on the Z axis I move it .1 "and it moves 0.030" thanks.
Hi, I have a video that will help you.
ruclips.net/video/KcAsAQUjDNg/видео.html
@@rogerwebb9600 I had that doubt, it is really very helpful, thank you. Greetings from Tijuana Mex. Gracias amigo
How to connect with the cnc in the status bar it's not showing connected pls tell me I have already connected the ethernet in my pc but mach3 is not detecting this
Hi, you will need a driver for your machine,
@@rogerwebb9600 which driver needs to install for the xps -rl motion controller
@@shobhangiverma7090 Your seller should have provided a driver
If i start up mach3 cnc everything works only the router is not responding to anything.. Its like the router does not see the pc....Do you now what to do?
HI Roger, hope u can help me out, im new to this CNC, but i have build the machine whit Nema 34 stepping motors, but i still missing the spindle, so i wanna ask what kind of spindel are u using at the end of this video, i like it :)
Subtitular en Español, gracias
Boa noite , instalei um controle de playstation em meu mach3 e estou querendo adicionar um comando mas não estou conseguindo seria o (reverse run) como trabalho com corte de chapa com massarico as vezes o corte é interrompido e se conseguisse programa o reverse rum no controle ia me ajudar muito....Obrigado pela atenção..
Hello RogerGreat videos, I have watched many. I was wondering if you could help me with configuration file? I have the same salecnc XJ6090 machine as you do. I am using Mach3 as well. I was given one when I bought the machine locally but it is not right. Would you be willing to share you file with me ? Thanks in advance, I'm going crazy trying to figure this outRob
Not sure if you can help or not. I have my CNC, home built, with a Pokey57cnc controller. When I select machine coordinate and then click on the ref all home button none of my axis move and the DRO’s go to zero. Would you have any ides why the axis don’t move? Thank you.
Hi, dose the axis move if you yog
@@rogerwebb9600 thanks. Finally figured it out. Had to make a few changes in Pokey setup. Thank you.
dear sir
i need your help to solve this issue.
I have a drawing with 35mm x 50mm but when inserted in Mach3 and finishing it on my CNC i can clearly see that the drawing is 25mmx30mm.
what is the issue to have same dimensions on Mach3 ?
Hi, see my videos 243, 245, 197 and 198 that will help you.
Merry Christmas and happy new year to you and your family
Roger i am new to CNC i just watched video 79 but missed how you moved the image back inside the table limits - i have a image that is sitting outside the limits and i am not sure how to fix it
Set your G54 work offset then press regen in Mach3
Thank you, for watching,
Please forward the video on to a friend, Australian Inventor Roger Clyde Webb ;-)
hi, I have a question. iam about to move a big router CNC machine from one shop to a different shop and i will need to disconnect all the wires , will it be a problem to set it up when i will assemble it back in a second shop. or just plug and play . other words will i have to program machine after disconnecting all the wires from control box . Thank you
shouldnt if you have your settings saved in Mach 3. I unplugged myne and moved it cross the country twice
My mach 3 execute on 500 lines after that it stop ....
Whats the issue ..???
You need to get a licence for Mach3 from Artsoft, it is locked at 500 lines as a demo
Dear Roger. Thank you so much for your videos, they help a lot. Just wondering maybe you can help me something. I am quite new with all this programm and the cnc machine, so it doesn't come easy for me. But the thing I am struggling now is that i don't know how I get the machine cut/engrave in exact place I need. I think i might of miss putting some details in Mach3 or something. And the worst part is that for some reason the spindle goes right into the material, how and where should i fix that it stops exactly where the materail begins? I am sorry if my questions are stupid, but I had tried to figure this out myself but no luck. I would so appreciate your help. Best regards, Agnese
Agnese Dambe
Gday Agnese, Ok, you need to have a look at my videos 78, 79 and **88** then you will be ok, good to go. ;-)
Roger Clyde Webb Australia ;-)
Roger Webb
Thank You, Roger so much. I did check and watch your videos many times, I must of been doing something wrong. I noticed one thing though, that my image is out of the table as well, how you get it in the middle, you say, just need to jog it over, but what are you doing?
I am trully appreciate your time on answering propably on my easy questions. Best wishes.
Hi Roger
I am a beginner looking to learn Mach3 and Cnc.
Do you have a video explaining the basics of the Mach3 windows
Hi, yes go to my channel there are many videos on Mach3, CNC and Windows
Roger Webb ok thank you. What are your thoughts on the grizzly go704 mill and go765 lathe to start this journey
Go and see CNC4XR7 channel he has converted the Grizzlies to CNC, and tell him I sent you.
you said softlimits and u hit the machine coords how did u make it move back to home
turn off soft limits after machining ?
sir i have cnc 3040 and i use mach 3 everything is working but moter is not working . can you give me solution, thankyou
Hi, see my videos, 198, 242, 243, 245
Australian Inventor Roger Clyde Webb
I must set the mach 4 in my cnc milling machine. Someone can set me through remote assistance?
can you help me fix my home and soft limits? my bed is Y-279 & X+203 Z+57 and i currently have my HOME at our SW corner of the cnc mil with the Z axis all the way up thats HOME
Franks Hots This is OK
Roger Webb THANK for your response, the issue is that it seems that when im home Y&Z should be moving away from 0 "home" in the Positive direction? but as you see by my setup one is in the - & the other is in the + direction so if i run a G-code from your software one axis will not be heading into the center of the material but away
Franks Hots
Ok, now I understand, go into config (top left hand
side) of Mach 3 window. Then click on home and limits in this window you can
change the individual axes from + to - this should sort your problem out.
Roger Clyde Webb Australia ; ))
this is not true as i did exactly what you did and my machine smashed into the side in both directions . i have a cnc 3040on mach 3
I have mach3 set up for metric but dro showing inches. how can I get it to show metric values.
did u fix that ? You have to change it in the config. THEN YOU HAVE TO SET ALL MOTOR TUNING TO INCHES. And also your limits
@@joeygonzo thanks man, I figured it out a while back.
Well I got a good one for you mine cut letters backwards what is wrong
I would say that the X + and X- are backwards and I can only suggest that you will need to go into MACH3 and swap them around.
Thank you, for watching
Please support me on Patreon, subscribe and forward the video on to a friend. Roger Webb ;-)
Roger Webb. You know exactly where it's at maybe I can find it I will check it tomorrow thank you
See my video 198 and please support me on Patreon
Roger Webb I'll check it out after work today thank you
Roger Webb yes that did the trick very helpful video it fix my problem thank you
shame really if you want to help people you need to explain things , like how to zoom in
and how to jog the image over to the centre
Говорила мне мама, учи английский...
ارجو من حضرتك الترجمه الى العربيه ارجوك