Installing DTill Fabworks Stubby Bumper and OPENROAD Panther Series 2S Winch 13,000lbs | Part 1
HTML-код
- Опубликовано: 17 янв 2023
- We finally have the new DTill Fabworks Bumper Installed! I had purchased it on Black Friday. We also install the OPENROAD Panther Series 2s Winch on the stubby bumper. We will be wiring the bumper for the Next video since I chose not to cut my Grill I have to extend the wires and install the control box in my Engine Bay. We will also be doing other stuff to the bumper and painting it soon.
Pick up the OPENROAD Winch here AND use Promo Code NAJAR10 for 10% off 🤟:
openroad4wd.com/products/open...
The Dtill Stubby Bumper Here💪:
www.dtillfabworks.com/product...
👇!NAJAR OFFROAD MERCH AND JEEP ACCESSORIES!👇
NAJAROFFROAD.COM
👇 Get Your Wheels, Tires, Parts on TrailBuilt! 🚐
team.trailbuiltoffroad.com/Najar Offroad
👇Book a Guided Offroad Trip Through San Diego Mountains 🗺
sandiego4x4.com/ref/Najaroffr...
NAJAR GAMING🎮
bit.ly/36cBbJK
RAVEN RACING 🏎
bit.ly/2TvhEld
NAJAR OFFROAD FACEBOOK 👥
/ najaroffroad
📸 INSTAGRAM 📸
NAJAR
bit.ly/3yUlJiz
GOON3R
bit.ly/2Hh075z
CHRIS
bit.ly/2SSQ018
You can now Join the Membership to support the channel!🤟
/ @najaroffroad
👇 JEEP PART LIST 👇
2002 Jeep Grand Cherokee Laredo
-Inline 6 w/ 242 T-case |
-Rocktrix RT112 17x9 -12mm | amzn.to/2RdqqTH
-Iron Rock Front Long Arms | bit.ly/3yqB5u9
-Iron Rock A-Arm | bit.ly/3yrY8os
-Trail Forged Rear Control Arms | bit.ly/3AvuiRA
-Rustys 4.5 inch Springs | amzn.to/3fIRVxX
-Trail Forged HD Ultimate Steering Kit. | bit.ly/3hH7Pst
-Corbeau Baja RS Front Seats |
-Atoto S8 Carplay Radio | amzn.to/3fGElej
-Interior Lights | najaroffroad.com/products/int...
-Dash Lights | najaroffroad.com/products/das...
-Viper Coil Mod | bit.ly/3xkv0zj
-Spyder Headlights (Chrome) | amzn.to/3g011Fi
-Spyder Tail Lights | amzn.to/3fEMHDi
#jeepwj #grandcherokee #jeep
Business Email - YTNajar@gmail.com
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them. 
Авто/Мото
I have the Dtill tire carrier rear bumper getting delivered tomorrow!!
Oooo nice! Might need to get the matching rear🫣
That’s dope man
Thanks brotha💪 there’s more videos to come just got something else done to it 🤫
She's looking awesome 👌 👏 👍
Wait for part 2 or 3🤫 I did something else today haha
I have found the RTV silicone works great in place of loctite. For stuff like that it's rubbery properties acts as an insulator against vibration and harmonics which in the end is usually what loosens. And then it's not hard to take off when you want to take them off as well I've actually had driveline bolts vibrate out the I put on with never had one come out with RTV silicone
Interesting! Great tip
I like it thank you for showing it I'm new to the grand world and I can't wait to get mine better equipped for offroading
We're just gonna send it
That's the right way
You could clock the lever for the winch
I will definitely look into that because the grill set up I’m going to run I really don’t want to cut haha
Pick up the OPENROAD Winch here AND use Promo Code NAJAR10 for 10% off 🤟:
openroad4wd.com/products/openroad-13000lbs-winch-2s
The Dtill Stubby Bumper Here💪:
www.dtillfabworks.com/products/wj-hidden-winch-stubby-bumper
Looks great!! Keep up the good work you give me great inspiration for my upcoming project 😎
Thanks! Have fun with the projects!
Esta Perron!! Animo
💪 espera el proximo video😎
Nice 💯
Lets go. Youre 1st 🤟😂
@@NajarOffroad made history 😂💯
Looks like the fit of your DTill bumper and radiator support is similar to the pair I bought. The bolt holes didn't light up well and had to open them up. Additionally the rad support pushed the fan shroud into the fan. I ended up welding on 1/4" plates to space to the rad support down. Between the poor fitment and to weak instructions, I was disappointed overall.
For the winch you can clock the end by one bolt and turn the clutch engagement lever toward the front. Then you don't have to trim the grill. Just search "How to clock a winch from Openroad 4x4"
Also there is room under the driver's headlight to mount the solenoid box.
Yea hasn’t gotten back to me yet with instructions but I imagine he’s a small business and is always busy like me😂 I’m going to figure something out to get both bolts in on the sides. I haven’t tried to put the rad support yet.
Yea I read the comments and I’ll be clocking the winch lever nice I’m going to try to hide it under there 👌 thanks for the suggestion
Looks fucken dope
See if can rotate the switch on winch .I have the Dtill fabworks bumper on my wj .
I do need to trim the grill to make that piece work
@@NajarOffroad I rotated the switch on my winch soil didn't trim my grill
@@kevinclevenger8741 Send me pictures on how you did that on Facebook or Instagram! @najaroffroad
@@NajarOffroad I just unbolted the 4 bolts in the end on my winch .but I would ask the company that built your winch and see if it can be done
What happens to the other badass bumper?
Going to sell it local only. If interested DM me on Instagram @najaroffroad
@@NajarOffroad Chris doesn't have one...
He wants a stubby from HK but we need to fix his Jeep first haha
Do your neighbors get pissed that your cutting up your Jeep at night? My neighbors would call the cops ASAP
Haha it wasn't to late maybe 8:30. The neighbors actually were outside with a fire pit
Why would you wanna keep the liner? They’re literally useless. Lol
What liner do you mean sir?
If you’re talking about the housing that holds the headlights and grille, I just don’t want my headlights rattling which I’m guessing would happen if you cut that piece
@@NajarOffroad no, the wheel well liner, you said you wanted to keep that
@@Caustyler10 Oh Yea I want to Keep that in because of the part by the door if you dont mud, dirt, rain gets through there. Happened to Chris's Jeep haha
@@NajarOffroad oh, l never had that issue with mine