A tip: You can right click on a light you've added to your scene and hit "adjust light power" and move the mouse left and right to interactively adjust the lights power in the viewport (you can do it for the light angle as well) I like this better than entering numbers/adjusting sliders in the menu. :)
Ok I can confirm that you can do the light power but I dont see where it lets you adjust angle however it does give an option for size. But I also found out that you an turn on Auto smooth by right clicking going down to "Material Utilitis" and under special you will find the option. You can even select if its just for the selected object or everything in your scene SIIIIIICK
Thank you man for making such explanatory and free tutorials for people who are just starting out in this area, I don't even speak English that well but they are so well explained that it's very understandable! You are awsome :D
lol. I'm watched most of your videos .. they help me to work more smoothly with blender but when u post a new video even for beginners like this one I love to watch too .. you are really so great ❤❤❤
Handy dandy tip if ur like me and scaled up the rug, or any other object, whilst not in edit mode it will mess up your beveling and make it off center. Either scale up whilst in edit mode OR do it in object mode but press Ctrl+A and select scale
Love this!! The only problem I encountered that I can't find a solution to is that my floor started showing as black in render view even though it's the right color in material view, I've searched so much but nothing I've seen fixes it. Did anyone else get this problem and managed to fix it? Thanks! :)
Mine did not bevel either at first. I had to re-do the floorboards and make sure they were individually ripped apart with the V key. I apparently didnt do enough or something the first time.
when hit copy to selected my rug does not get the same output as the tutorial. I also got a line in the middle part of the rug after joining the two bits. *edited* Nevermind, fixed my own problem, my points when creating the rugs were a bit messy so that was effecting the bevel results. Also not sure why my floor is missing when viewing in rendered mode but is there in materials preview. I also cant seem to duplicate the wall faces without the duplicated layer being black
Also when I do the 12:27 carpet, I noticed this before but when I bevel, it doesn't bevel perfectly in the middle of the vertices, it slightly bevers on the long side. So for the back of the couch, it was more of a Long bevel, instead of directly in the corners, any tips?
At the 22:38 for bevelling the nail/screw on the wall for the painting, when i would bevel it, the bevel will go into itself messing up the face, i tried rotating it 180 to see if it was that i was on the wrong side, but it still did the same, what other way could I extrude it?
I had the same problem. You have to scale your cube in edit mode and not in object mode (before you extrude it). Then you can extrude it. When you scale a cube in object mode you scale the object but you want to scale the faces ;)
This answer is not really for you but for anyone who comes here with the same problem, if -0.5 doesn't work for you when you scale the cube you have to select your cube then hit ctrl + a to apply scale and then you can do the rest! That way you can get the extrude part perfectly. Hope it helps!
It reminds me of one pretty old game, where you could create rooms like that - 2 walls and a floor, put any furniture, and you didn't had to pay for furniture as well, as I remember. Sad I can't find it anymore..
make more vedio on 3d of desk setup like programming or gaming design,,,,,i really want to follow ur channel as a total begnier.....make it more easy to understand please thanks
When using the bool tool for the arch, it deletes the plane object. Any idea how to fix this so that the arch is still editable after boolean or is that unnecessary?
im very new to blender... i was thinking about doing one of these... but i wanted to know if there is a chance to use snap functions for this kind of style? would be cool if u just could use some kind of smat guids/symmetrical raster and snap the stuff to it... :D
Been watching the first 3 minutes for the past hour with 0.5x, this is rlly too fast for beginners, but nevertheless a really cool one. For those who got stuck with the Bool tool thing, try click self intersection under solve option!
Hola!! Cuando intento hacer el bevel al sofa no me corre parejo, que debo hacer? / Hi guys when I try to do the bevel to the corner of the sofa it doesnt seems uniform like the video, what can I do?
@@joakimfr9 To curve the arch you use CTRL + B for bevel. You might have your empty bool box placed over some other object, make sure you resize it and bevel it. Always remember to apply scale if resizing things in object mode, also, pay attention to your origin point (orange dot), you can always reset it to object by doing: object > set origin and then into what you want (i mostly use set origin to geometry to reset it to the object im editing)
I'm stuck at the beginning when I do the things with de arch it doesn't work for me I select the room press ctrl and minus but it just make a zoom out I have the add on activated so I don't understand if someone can explain me the problem
You can go to preferences, then search bool tool. Oben the menu. Is says what the actual shortcut is. For me it was control shift b, then a pop menu came up. Press difference.
To be honest since all the progress of AI I have lost a lot of motivation to create 3D Soon this technology will reach 3D (look at dall e and midjoarney roadmap) How do you see this technology in relation to our professions and careers? how to bring back my motivation ?
AI might become very good at making 3D art, but it can never replace _you_ or your artistic vision, right? You probably began making 3D art because you wanted to create pieces with your brain, and that's something AI can't take away from you. AI is just another tool humans use to make things easier for themselves. Instead of worrying about if it will replace human artists or artwork, think about how you can use it to create better art for yourself. This is what I tell myself, at least 😅
hey! i love your tutorials so much, they are very intuitive and easy to follow. i just have one question. how come when initially adding an object, you go into the edit mode to scale it? would it not work the same way just to scale it in object mode? this doesnt really change anything, but i would just like to know :) tysm for the great tutorial!
Excuse me friend, you can make a tutorial of a flamethrower, that is well explained, without skipping a step and without cuts. Please. Can the flamethrower be something almost realistic? And another flamethrower tutorial that looks like anime, like a superpower.
Ranks for Blender 1. Absolute beginner (You don't know how to even move) 2. Beginner (You know very basics, where I am) 3. Intermediate (You know quite a bit and can apply the knowledge to make your own stuff) 4. Advanced (You know a lot about 3D modeling and can make cool stuff that most people can't. Not restricted to blender) 5. Industry (College level, been doing it for years as a job. No longer just a hobby) TLDR. Watch the donut tutorial by Blender Guru, the easiest most beginner tutorial ever.
@@jordanswan8144 Yeah, it's a little confusing to tell what is exactly "Beginner" and "Intermediate". Sometimes they'll blend things together, I tried to watch one of their videos, but I immediately left because I knew I couldn't follow along. At first, I thought it was the creator's fault for going too fast, but after a few other absolute beginner tutorials, I came back, and now I can follow along. But I get it if their process is not for you, I just saw your comment and I was a bit thrown off because the way you said it sounded a little bit rude (I know that wasn't your intention). Have a great day! TLDR: I thought so too, but watched a few other tutorials first. It just takes time.
ive been using blender for a week and could redo this whole video at home after watching it at work. im still quite beginner. I would say this is a beginner tutorial but not a basics of blender tuto, as in you have to know basics stuff already. If you need really basic tutorial, i would start with donut from Andrew ( its fun to quickly have something made in a couple hour) and then introduction to blender from crossmind ( this one take a few days to do, took me 5 whole days, some take near a month in the comment if not doing it as intense altho its technically designed from 7 days with a couple hours each day) but after that you should be able to tackle video like this one here pretty easily.
how did you select the door and then the cube and both were in the yellow selection color? Because when I select one and then the other, they don't stay the same color, one turns yellow and the other turns orange.
Love these isometric rooms and would love to see more like them in the future!
So much game in these videos, just wow!! It's the first time ever i'm trying my luck with 3D and i'm having a blast following along! thank you!
Great to hear, thanks!
A tip: You can right click on a light you've added to your scene and hit "adjust light power" and move the mouse left and right to interactively adjust the lights power in the viewport (you can do it for the light angle as well) I like this better than entering numbers/adjusting sliders in the menu. :)
Ok I can confirm that you can do the light power but I dont see where it lets you adjust angle however it does give an option for size. But I also found out that you an turn on Auto smooth by right clicking going down to "Material Utilitis" and under special you will find the option. You can even select if its just for the selected object or everything in your scene SIIIIIICK
@@papasalvo yeah that was my bad it was “size” not “angle” except if your light is a sun light then I think it gives you the angle option instead.
Thank you man for making such explanatory and free tutorials for people who are just starting out in this area, I don't even speak English that well but they are so well explained that it's very understandable! You are awsome :D
Happy to help :)
lol. I'm watched most of your videos .. they help me to work more smoothly with blender but when u post a new video even for beginners like this one I love to watch too .. you are really so great ❤❤❤
I absolutely love these videos and they've really helped with my skills on blender, thank you :)
🙏🙏🙏
Best Video for Beginners ♥️
this took rlly long but it was amazing the results were so good
Handy dandy tip if ur like me and scaled up the rug, or any other object, whilst not in edit mode it will mess up your beveling and make it off center. Either scale up whilst in edit mode OR do it in object mode but press Ctrl+A and select scale
I just finished the mushroom tutorial you made and can't wait to do this one! I also just enrolled in your course!
Awesome! Thank you!
Great tutorial! It helped me to learn new features in Blender :D
Love your channel ❤️
Too many things too learn 😅
I wish you could make a separate playlist to teach modifiers ☺️
You have to take it easy, it is impossible to learn all in one month, make small things and enjoy the process, then do more advanced things... etc.
Thank you, glad you like it!
@@polygonrunway
Love your channel man it is helping me improve ❤️
What an amazing job, mate! I enjoy a lot your tutorials with wonderful results, thanks 4 everything!!!
Thank you! Glad you enjoyed it!
Thanks for another awesome tutorial!
thank you for providing inspiration so far in the 3d world
Oh my... I need to do this. I love this!!!
Love this!! The only problem I encountered that I can't find a solution to is that my floor started showing as black in render view even though it's the right color in material view, I've searched so much but nothing I've seen fixes it. Did anyone else get this problem and managed to fix it? Thanks! :)
So, you're meaning that I can do everything with a single plane? That's cool.
You really helped mi to improve in blender thanks man
at 1:33 idk why -0.5 looks too big, not like in the video so i just went with -0.2
Help 5:50 I can't snap to vertex when I press Ctrl
I am using Macbook for following this tutorial. I can not use Crtl Numpad - in 3:26. Could you help me?
Thank you! now I can try to make it!
you are the best
thanks
🌼🌸🏵️🌻👌👌👌
For some reason I get graphical glitches when trying to bevel floors. Like the boards aren't separated properly. I've tried everything.
Mine did not bevel either at first. I had to re-do the floorboards and make sure they were individually ripped apart with the V key. I apparently didnt do enough or something the first time.
Great tutorial
Thanks!
idont get the same cut with the bool tool for me the backpanel of the cut dont get deleted
Just shift the curved plane a bit above the floor and it will work.
thanks sir love it
I love Blender Arnie
😎
You could make a complex room, starting from simple and building on every tut
when hit copy to selected my rug does not get the same output as the tutorial. I also got a line in the middle part of the rug after joining the two bits.
*edited*
Nevermind, fixed my own problem, my points when creating the rugs were a bit messy so that was effecting the bevel results. Also not sure why my floor is missing when viewing in rendered mode but is there in materials preview. I also cant seem to duplicate the wall faces without the duplicated layer being black
Please More videos sir Its my request By the way love your Workk
the 1:50 s didnt quite work for me in the current version. it was way too big of an extrusion, had to do a 0.1
Also when I do the 12:27 carpet, I noticed this before but when I bevel, it doesn't bevel perfectly in the middle of the vertices, it slightly bevers on the long side. So for the back of the couch, it was more of a Long bevel, instead of directly in the corners, any tips?
At the 22:38 for bevelling the nail/screw on the wall for the painting, when i would bevel it, the bevel will go into itself messing up the face, i tried rotating it 180 to see if it was that i was on the wrong side, but it still did the same, what other way could I extrude it?
I had the same problem. You have to scale your cube in edit mode and not in object mode (before you extrude it). Then you can extrude it. When you scale a cube in object mode you scale the object but you want to scale the faces ;)
This answer is not really for you but for anyone who comes here with the same problem, if -0.5 doesn't work for you when you scale the cube you have to select your cube then hit ctrl + a to apply scale and then you can do the rest! That way you can get the extrude part perfectly. Hope it helps!
yay
the shade smooth has been replace in 4.1, and I cant find a way to make it at 3:42
just right click, press shade smooth in the drop down menu
@@youtube.j.j.j it result differently, you can test on it
It reminds me of one pretty old game, where you could create rooms like that - 2 walls and a floor, put any furniture, and you didn't had to pay for furniture as well, as I remember. Sad I can't find it anymore..
Nice
whats the point of merge to center at 2:55 , sorry for the question still new haha
So that there is a cleaner geometry
what's add on at 3:00, anyone can let me know plss...
Thankss
Glad to help!
(Ctrl) + (-) doesn’t work for me what should I do
make more vedio on 3d of desk setup like programming or gaming design,,,,,i really want to follow ur channel as a total begnier.....make it more easy to understand please thanks
When using the bool tool for the arch, it deletes the plane object. Any idea how to fix this so that the arch is still editable after boolean or is that unnecessary?
If anyone else was stuck on this. After ctrl-shift-B, choose difference under Brush Boolean. It makes the object remain editable
Thats the one. Thankyou.@@OlliesOdyssey
Can also change the "Mode" in the Modifier section from Intersect to Difference. Realized this later.
Could you create either Tifa's Seventh Heaven or another staple from Final Fantasy VII?
Pressing alt e doesn’t work for some reason why?
can you make an isometric house?, if you can please make a tutorial
Watch this one 1) ruclips.net/video/5tJWH58bIpI/видео.html
2) ruclips.net/video/8XZQhLRQTDw/видео.html
@@Unknown3DBlender ok i will see
He has already, take a look on his work. He has make buildings and also he made the simpsons house, amazing job and super easy to follow.
im very new to blender... i was thinking about doing one of these... but i wanted to know if there is a chance to use snap functions for this kind of style? would be cool if u just could use some kind of smat guids/symmetrical raster and snap the stuff to it... :D
❤️❤️
Been watching the first 3 minutes for the past hour with 0.5x, this is rlly too fast for beginners, but nevertheless a really cool one. For those who got stuck with the Bool tool thing, try click self intersection under solve option!
Hola!! Cuando intento hacer el bevel al sofa no me corre parejo, que debo hacer? / Hi guys when I try to do the bevel to the corner of the sofa it doesnt seems uniform like the video, what can I do?
My bool tool never works😢😢😢😢😢 but I love and highly appreciate these tutorials😁
im stuck on the bool thing aswell, it does not cut out the arch. just removes one of the objects
Make sure your bool tool addon is enabled in blender, so you make sure you're not using something else you're not intending to.
@@joakimfr9 To curve the arch you use CTRL + B for bevel. You might have your empty bool box placed over some other object, make sure you resize it and bevel it.
Always remember to apply scale if resizing things in object mode, also, pay attention to your origin point (orange dot), you can always reset it to object by doing: object > set origin and then into what you want (i mostly use set origin to geometry to reset it to the object im editing)
@@darnassiannightsaber7835 Thx
I'm stuck at the beginning when I do the things with de arch it doesn't work for me I select the room press ctrl and minus but it just make a zoom out I have the add on activated so I don't understand if someone can explain me the problem
Je ne sais pas si sa peut aider mais essaye "ctr shift -"
You can go to preferences, then search bool tool. Oben the menu. Is says what the actual shortcut is. For me it was control shift b, then a pop menu came up. Press difference.
When i try the use the bool tool for the hall i just zooms me out? help would be appreciated😅
never mind i found it 😅😂
@@thesourcefilmbaker7021 howwww???? Lmao I’m still stuck at this
@@thesourcefilmbaker7021 how bro I'm stuck on this too this is horribleeeee
Waiting for next video
Vacation time! :)
Hey bro please suggest me best machine for use blender please reply
i dont know what im doing wrong with the carpet bevel its not showing at all D:
To be honest since all the progress of AI I have lost a lot of motivation to create 3D
Soon this technology will reach 3D (look at dall e and midjoarney roadmap)
How do you see this technology in relation to our professions and careers?
how to bring back my motivation ?
AI might become very good at making 3D art, but it can never replace _you_ or your artistic vision, right? You probably began making 3D art because you wanted to create pieces with your brain, and that's something AI can't take away from you.
AI is just another tool humans use to make things easier for themselves. Instead of worrying about if it will replace human artists or artwork, think about how you can use it to create better art for yourself.
This is what I tell myself, at least 😅
AI's will need a lot of our help for quite some time, don't worry :)
does anyone know why i sometimes have trouble snapping? sometimes it's not working when I'm doing the floor boards
Did you ever figure out what caused it? Have the same problem :/
make sure your mouse is where it needs to be, watch where his mouse is when he is holding ctrl
hey! i love your tutorials so much, they are very intuitive and easy to follow. i just have one question. how come when initially adding an object, you go into the edit mode to scale it? would it not work the same way just to scale it in object mode? this doesnt really change anything, but i would just like to know :) tysm for the great tutorial!
I like to keep objects with real proportions in 1,1,1 scale. Helps to avoid problems with modifier values and stuff like that
Ahh, thanks very much :)
absolutely love your videos, however this was very fast paced and quite hard to keep up with even at 75% speed. i love the tutorials tho
21:00
Excuse me friend, you can make a tutorial of a flamethrower, that is well explained, without skipping a step and without cuts. Please. Can the flamethrower be something almost realistic? And another flamethrower tutorial that looks like anime, like a superpower.
can i make this with 2.93?
Absolutely :)
Please more videos. sir...
I was on vacation :)
0:56
💫💫💫
👌👌👌👌
Too fast to follow along, had to pause too many times on the couch and got frustrated and quit. Maybe I'll try again later.
you gotta watch at least a slower speed , i noticed that either .5 or .75 is much easier to follow along
I'm so powerful, I don't need batteries to play
I accidentally beveled my carpet into 72 segments and blender almost crashed with 3 million triangles ;-;
Hope you save your project often 😛
70th comment, this comment broke the 69, unnice
Not bad, but dude seriously slow it down, shouldn't have to set the playback speed to 0.5 or constantly rewind to follow along
I redact what i said, im not a fan of this tutorial, only reason why im using it cause its a part of my project, you are moving WAY too fast
how is this a beginner tutorial!?
Bro are you on speed? This is not a beginner tutorial...
Ranks for Blender
1. Absolute beginner (You don't know how to even move)
2. Beginner (You know very basics, where I am)
3. Intermediate (You know quite a bit and can apply the knowledge to make your own stuff)
4. Advanced (You know a lot about 3D modeling and can make cool stuff that most people can't. Not restricted to blender)
5. Industry (College level, been doing it for years as a job. No longer just a hobby)
TLDR. Watch the donut tutorial by Blender Guru, the easiest most beginner tutorial ever.
@@RichieBre Thanks, currently creating my second donut. You're awesome at blender, but not the greatest teacher
TLDR. This video isn't for beginners
@@jordanswan8144 Yeah, it's a little confusing to tell what is exactly "Beginner" and "Intermediate". Sometimes they'll blend things together, I tried to watch one of their videos, but I immediately left because I knew I couldn't follow along. At first, I thought it was the creator's fault for going too fast, but after a few other absolute beginner tutorials, I came back, and now I can follow along. But I get it if their process is not for you, I just saw your comment and I was a bit thrown off because the way you said it sounded a little bit rude (I know that wasn't your intention). Have a great day!
TLDR: I thought so too, but watched a few other tutorials first. It just takes time.
ive been using blender for a week and could redo this whole video at home after watching it at work.
im still quite beginner.
I would say this is a beginner tutorial but not a basics of blender tuto, as in you have to know basics stuff already.
If you need really basic tutorial, i would start with donut from Andrew ( its fun to quickly have something made in a couple hour) and then introduction to blender from crossmind ( this one take a few days to do, took me 5 whole days, some take near a month in the comment if not doing it as intense altho its technically designed from 7 days with a couple hours each day) but after that you should be able to tackle video like this one here pretty easily.
at 10:58 when I click to copy modifiers only parts of the couch are beveled, the side of couch didn't react to the modifiers, someone has something ?
Most likely you squeezed out this part of the sofa through E. Check in x-ray mode if there are any extra edges.
how did you select the door and then the cube and both were in the yellow selection color? Because when I select one and then the other, they don't stay the same color, one turns yellow and the other turns orange.