Thanks for letting me know about the voidcaster! At first I was all pissy because I wanted a double action blaster and once I got the voodcaster, I researched and saw that the snapfire was better. Now, however, I see that the voidcaster has some redeem-ability, other than looking wicked cool. TLDR; thanks capn.
i just upgraded my scout mk2, which is the same internals, i shot it side by side to my quadrant and its improved just wish i had a chronograph or knew what spring to use for sure. because like you i just dug one up and tried untio one fit and shot better consistently.
I dont think the void caster should be upgraded. The trigger is tough to pull as is. That spring any stronger it'd be down right painful to use the blaster
If I could get some simple, small equipment to set the shape, I'd love to make a custom spring former, and sell custom springs for dart blasters. But making a piece of steel a spring requires some very tricky heat treating.
With the Quadrant, would it be possible to extend the rotation arm back to behind where the spring stop is and attach it there. Possibly even outside the shell? that would give you the ability to have a much larger spring without loosing the auto rotate.
Oh Captain my Captain, As I am thinking about making the tradeoff with the quadrant, could you check on yours how far back the plunger head goes when it's primed? Does the seal go further than the start of the slid at the top? I'm thinking of also closing up the top of the plunger tube in addition to putting a better spring in which would make the plunger push way more air through, thus potientially making it *way* more powerful. Also thinking of flipping the rotational mech to make it activate via the trigger
Captain Xavier Not so with the flagship one. Now that blaster has the largest plunger tube I've ever seen. Thing is getting to it will be a big hassle but with its plunger tube you can probably use spring loads more powerful than K26.
Hey Captain, you could something closely related to Hellboy's revolver from the Quadrant. And yes I know I might had misspelled the blaster and I'm sorry for that.
Hey Chaylo? Any ideas at all what spring it was that you used to upgrade the quadrant? Those things are only ten bucks at target which is a steal in my opinion and I thought that for its size even the stock performance did not sound bad but I would love to try and upgrade one or two if possible.
Question ive been wanting to ask. In a more "normal" springer, if you cannot compress a k26 or other upgrade spring far enough to get it to catch, (give or take) wouldnt simply removing a coil or two be enough to make that happen? (Assuming sufficient catch spring is in place of course) Also, kudos on a successful Quadrant mod when Drac ended up making his worse
+shadowsa2b yes, but only to a point. If you remove too many coils you get what I call "string rattle." Where the coil is so short there is no contact when unprimed and the spring is free to rattle around in the plunger tube. Also, if you cut it too short you reach a point where the new spring is weaker than the stock spring.
Captain Xavier i bought a spring to upgrade my kronos from my local hardware store with tighter frequency and more coils than its stock spring (not positive if its k26. Only identified by stock numbers). It had too many coils to catch, so i cut it to match the stock spring's coil count. It worked and has a tougher prime than its mate currently (deadpool pair), but has some spring rattle. (I also removed the prime lock and for now wrapped some plumbers tape under the o ring). Since its prime is tougher, i dont really see the rattle as a problem. Thoughts?
It might be just me, but the only reason I can think of for the voidcaster's design is because of Halo. It looks very "covenant", with the way it brackets your arm above and below.
You should turn the voidcaster into a star trek phaser, you could hold the top the way they could in the og series and that would fix the stability issue
For some reason, (this makes no sense because there isn’t a smart AR) my Quadrant fires one barrel really hard, two barrels fire sorta medium, and then one just puffs the dart and it doesn’t come out of the barrel. Dunno.
Cool. Apparently the "official" release was 2014 but some places had it as early as 2013. They also list the Kronos and 2018 even though the Deadpool ones were out in 2017. Semantics...
december of 2013 was when i got mine and thanks for replying to my comments. it means alot that someone this popular is taking time out of there day to chat with me. :)
Hmmmmmmmmmmmm that would not surprise me. I have seen his Sledgefire attachment for EIR but I haven't seen special shells that hold different ammo for the Sledgefire specifically
Ah man, I know that answer too, but I can't be bothered to figure out etsy. Hopefully someone more deserving than I gets it right. I also have on idea for the quadrant: use a "tooth-like" section of thin-walled PVC to extend/replace that weird part of the plunger head and then have a "hook" double back in place of the peg for the rotation mechanism, doing so to form a sort of "V" shape, this should allow for filling that gross hole in the plunger tube. Of course that is if there is enough room in the shell behind the plunger tube, however this can possibly be fixed by trimming the back for the shell (doubles as a redundant priming indicator) and possibly shaving down some of the excess flange on the back of the plunger tube. Of course this is all theoretical, and I haven't gotten my hands on the quadrant, so I could be totally wrong.
Ooh ooh ooh new idea can it k26 idk what it is but it’s a full auto gun everything in the blaster is powered by these springs idk it’s an old brand Idk many people know
Sooooooo, I haven’t read into the comments yetttt, but and plans to make a gun gauntlet out of the voidcaster , maybe have like a fast retrieval system for it, something like he the Spider-Man under gun did it’s reload cartridges you could maybe do something similar on a leg holster
Dear Captain X, Hi, I really hope you read this, because I have an idea that I really want to try, but have no idea if it will work. Imagine this, aight, a drain blaster, with a brass breach sniper like attachment (including barrel and stock) that can be pumped up to pressure using a crank. I really wanna try it, not to shoot people but probably just to plink around with, but have no idea how... can you try it oh great and powerful nerf God? (Disregard this if you just think it’s dumb and that a drain blaster is good enough as is)
I'm sorry if you've already done it can you tell me which episode it was? I also want to say thanks for getting me in to Nerf modding. Actually today I went to Goodwill and found a jaguar and in put a Tak 4 spring into it
wait, do you mean a ship YOU were captain of, or a historical Captain Xavier was captain of? because I don't know of a historical captain Xavier, other than you.
+J B there is a noise, a dart flies away at an indeterinate speed for an indeterinate distance. Exactly the same for all blasters. I could use the same blaster everytime and it would make no difference. :P
Voidcaster - remove the blue part, masterkey it, use as squishable front grip. Could help with stability.
Jakub Serzynski yes yes yes!
Alternatively use it as a hilt.
I'm trying to get my hands on one to do just that and make it a removable n-strike barrel. It's gonna be hard to make it look normal tho :/
good idea
The fact that it's a rapidstrike that you're shoving the k26 into 😂
The alien tech one could make for a masterkey if you removed the ar's and double up as a forgrip
The range is bad enough already, firing 4 at once would give it extremely pitiful performance
True... unless someone finds a way to improve the performance greatly, still idea is on the shelf
True... unless someone finds a way to improve the performance greatly, still idea is on the shelf
Wait, Nerf made a Zat gun? Time to hunt some up to repaint.
Build the squad as a Stargate SG1 cosplay.
I love how cap always slams the table in the beginning of every episode
I don’t.
Thanks for letting me know about the voidcaster! At first I was all pissy because I wanted a double action blaster and once I got the voodcaster, I researched and saw that the snapfire was better. Now, however, I see that the voidcaster has some redeem-ability, other than looking wicked cool. TLDR; thanks capn.
Hmm, so combining these two blasters would make it pretty dang awesome. Looking at the internals that would be a hell of a job though
I think someone has melded a Doublestrike to the barrels and revolving mechanism from a Quadrant to make a mini Hammershot.
11:32 I have this blaster and it came with the elite darts
Yes! My favorite working type of blaster
If I already had k26, would it be worth buying an aftermarket spring for a longshot?
+A Squid With a Hat yes
Captain Xavier why?
+A Squid With a Hat cause u asked and got answered
Because k26 is the wrong diameter for a long shot
If you are a kid ,yes you won't be strong enough to prime but If you're a teenager or an adult ,no,you will be strong enough
Hahaha that opening shot was gold
Congratulations Sir! Cheers
Can a Turbo Advance and Regenerator take a k26?
How strong actually is a k26? Is it 16kg? 8kg?
+That- Mann depends on how long you cut it. It is 3.88lbs/in
I believe it's around 14kg.
i just got a voidcaster since the toysrus is going dead forever. costed me 9.99 plus tax
Same problem with double action pistols
Harder to aim because of the weight of the trigger
i just upgraded my scout mk2, which is the same internals, i shot it side by side to my quadrant and its improved just wish i had a chronograph or knew what spring to use for sure. because like you i just dug one up and tried untio one fit and shot better consistently.
Thank you kind sir for the video
I dont think the void caster should be upgraded. The trigger is tough to pull as is. That spring any stronger it'd be down right painful to use the blaster
If I could get some simple, small equipment to set the shape, I'd love to make a custom spring former, and sell custom springs for dart blasters. But making a piece of steel a spring requires some very tricky heat treating.
With the Quadrant, would it be possible to extend the rotation arm back to behind where the spring stop is and attach it there. Possibly even outside the shell? that would give you the ability to have a much larger spring without loosing the auto rotate.
Happy Valentine's day, Captain and have a nice day Sir.
Could you single the voidcaster and add a stock or a foregrip/"aftgrifp"? I think that could look pretty awesome.
Well looks like someone found a decent blaster to extract its springs from.
Nice. I always wanted workout equipments that was fun to use while exercising. Now I can strengthen my grip while having a Nerf war!
Windows 7 for the shop-top (so to speak)? AHHHH IVE BEEN ON WINDOWS 10 SO MUCH THAT ITS NOSTALGIC!
Oh Captain my Captain,
As I am thinking about making the tradeoff with the quadrant, could you check on yours how far back the plunger head goes when it's primed? Does the seal go further than the start of the slid at the top?
I'm thinking of also closing up the top of the plunger tube in addition to putting a better spring in which would make the plunger push way more air through, thus potientially making it *way* more powerful.
Also thinking of flipping the rotational mech to make it activate via the trigger
I wonder when you're going to get to the old koosh vortex blasters.
They use tension springs, not compression springs.
Captain Xavier Not so with the flagship one. Now that blaster has the largest plunger tube I've ever seen. Thing is getting to it will be a big hassle but with its plunger tube you can probably use spring loads more powerful than K26.
I actually really dig the Quadrant and the Fang for tiny 4 shot sidearms/holdouts. Better than a Doublestrike IMO in the same size.
Great vid, keep it up man.
Happy Valentine's day
I can't seem to find a turbo advance anywhere either...been looking for weeks.
Your videos are awesome
Hey Captain, you could something closely related to Hellboy's revolver from the Quadrant. And yes I know I might had misspelled the blaster and I'm sorry for that.
I’d like to see a “grappling gun jolt” into
Joshua - just bend a few paper clips and poke a few holes into. The dart and put the paper clips in and then add string to the bullet to the gun
On it
If you do a sword and pistol round you could use the voidcaster as a parrying sheild blaster
Ooo love those recon stock 3d printed supports
You should try intergrating a slingfire stock to a rough cut
Could you single the voidcaster?? Would that improve performance?
You could...I have no idea if it would help
ive been waiting for the voidcaster
Hey Chaylo? Any ideas at all what spring it was that you used to upgrade the quadrant? Those things are only ten bucks at target which is a steal in my opinion and I thought that for its size even the stock performance did not sound bad but I would love to try and upgrade one or two if possible.
Nope.
Could you have the voidcaster fire 2 darts at a time? And thus have a shotgun pistol
+beriorgar yes...but it would fire about 5ft...if at all.
Love your videos. Can the voidcaster firing mechanism be put in a Rival Kronos so you can dual wield them
No
I love your vids Capt been here from for a while keep up the good work man
+LIthunderbolt1003 thanks!
Captain, when will you attempt a "K26-ing" of the Zombie Strike Nailbiter?
When I get one...
Hey chalo I will see you at jenb3 please remember me!! Love your videos!
I expected you to try and make the voidcaster into a shotgun pistol of some kind.
Question ive been wanting to ask. In a more "normal" springer, if you cannot compress a k26 or other upgrade spring far enough to get it to catch, (give or take) wouldnt simply removing a coil or two be enough to make that happen? (Assuming sufficient catch spring is in place of course)
Also, kudos on a successful Quadrant mod when Drac ended up making his worse
+shadowsa2b yes, but only to a point. If you remove too many coils you get what I call "string rattle." Where the coil is so short there is no contact when unprimed and the spring is free to rattle around in the plunger tube. Also, if you cut it too short you reach a point where the new spring is weaker than the stock spring.
Captain Xavier i bought a spring to upgrade my kronos from my local hardware store with tighter frequency and more coils than its stock spring (not positive if its k26. Only identified by stock numbers). It had too many coils to catch, so i cut it to match the stock spring's coil count. It worked and has a tougher prime than its mate currently (deadpool pair), but has some spring rattle. (I also removed the prime lock and for now wrapped some plumbers tape under the o ring). Since its prime is tougher, i dont really see the rattle as a problem.
Thoughts?
Brass breech the voidcaster maybe???
Do one on the tennis ball blaster
Is the surgefire in the next episode ?
It might be just me, but the only reason I can think of for the voidcaster's design is because of Halo. It looks very "covenant", with the way it brackets your arm above and below.
You should turn the voidcaster into a star trek phaser, you could hold the top the way they could in the og series and that would fix the stability issue
For some reason, (this makes no sense because there isn’t a smart AR) my Quadrant fires one barrel really hard, two barrels fire sorta medium, and then one just puffs the dart and it doesn’t come out of the barrel.
Dunno.
Yeah...that is weird. Sounds like an issue with the air seal.
Could you try putting a K26 into a Buzzbee/ Air warriors Night tek? I want to know before I try and mess up my gun.
Yes, I recently found one so I will be trying it soon
suprised you haven't done the retaliator
...I have...like...a year ago...
oh yeah. episode 12. im dumb
also i fixed the nerf wiki for the magnus
Cool. Apparently the "official" release was 2014 but some places had it as early as 2013. They also list the Kronos and 2018 even though the Deadpool ones were out in 2017. Semantics...
december of 2013 was when i got mine and thanks for replying to my comments. it means alot that someone this popular is taking time out of there day to chat with me. :)
For next QnA, would a curved hilt like Dooku's be more or less effective in real fencing?
Ask this on the last q&a video. That is where I pull questions from
Captain Xavier, Ok I just thought you took questions from many videos. Mainly the ones that intrested you the most.
Where do you find all these springs?
I take them from the corpses of the blasters I kill...
Hey Thanks for the quick response; hope your staying warm and enjoying these snow days.
I am warm...but I work from home so...no snow days for me :(
Happy Valentine's day cap
Oh captain, my captain. Do you like Evil Dead or Ash Vs Evil Dead
Yes
You should create a modular Sledgefire that can take modified shells with different ammo types (i.e. single elite, mega, rival, etc.)
Corbin Newhard I think he already has
Hmmmmmmmmmmmm that would not surprise me. I have seen his Sledgefire attachment for EIR but I haven't seen special shells that hold different ammo for the Sledgefire specifically
that better not be Windows Vista on that shop laptop Chaylo. if it is, we're going to have some issues ;)
Win7 Pro
The Nerfer From Black Mesa lols I have widows 10 on my laptop and computer
I prefer windows XP.
L1nux 4 l1f3 br0!
“Windows Vista..Can’t even play Solitaire.”
what spring did you use for the quadrant?
As I said...in the video...I have no idea.
thanks, sorry i missed that.
Yea another vid
Can a mag take a k64?
Yes
Hey captain xavier are you gonna go to endwar when it rolls around?
Shhh, don't mention End War.. lol
I'm too hyped for it :D
When is it this year?
Same date. 23rd-25th
Ah man, I know that answer too, but I can't be bothered to figure out etsy. Hopefully someone more deserving than I gets it right. I also have on idea for the quadrant: use a "tooth-like" section of thin-walled PVC to extend/replace that weird part of the plunger head and then have a "hook" double back in place of the peg for the rotation mechanism, doing so to form a sort of "V" shape, this should allow for filling that gross hole in the plunger tube. Of course that is if there is enough room in the shell behind the plunger tube, however this can possibly be fixed by trimming the back for the shell (doubles as a redundant priming indicator) and possibly shaving down some of the excess flange on the back of the plunger tube. Of course this is all theoretical, and I haven't gotten my hands on the quadrant, so I could be totally wrong.
the ballzooka
I like the Quadrant.
Me too
Do you have tips for moding
Yes...that what 90% of my channel is.
Captain Xavier well im a new comer to your channel
If the nerf infimus is a spring fire you should try and put a k26 in
I'm almost positive it's a flywheel
Nice
Liked
Hey captain Xavier I’ve tried modding a recon mk2 but the shell won’t close after I got everything in place got any ideas?
You clearly have something in there wrong. Figured out which part it is and put it in right.
Will the old school secret shot take k26. If you already know can you tell me
Which one?
The one that fires a dart out of the pistol grip
2:45 The shell looks like the head of a pteranodon. Completely irrelevent.
Like your spelling lol
Didn't know the voidcaster had a plunger
Hello I don’t know what to comment
good job you figured it out
Yes
Hello idiots don't know what to send
I wouldn't brass the quadrant after seeing how drac tried and in a way it backfired
The xshot tk6 can take a k26 and gets almost 90foot ranges
Ooh ooh ooh new idea can it k26 idk what it is but it’s a full auto gun everything in the blaster is powered by these springs idk it’s an old brand Idk many people know
There's A new intro!
Maybe a internal transplant? Difficult but maybe not impossible?
Totally possible
Captain Xavier maybe I’ll have to try that.
K26*
We'll be down in dallas for the big nerf war. The kids are hoping you'll sign their blasters.
+Johnny Miller I would love to!
Sooooooo, I haven’t read into the comments yetttt, but and plans to make a gun gauntlet out of the voidcaster , maybe have like a fast retrieval system for it, something like he the Spider-Man under gun did it’s reload cartridges you could maybe do something similar on a leg holster
Shotgun pistol?
The voidcaster would fire about 5 ft if you tried to shotgun it.
Well crap. Thought it'd be a good masterkey
Your intro gives me a cave man vibe
Bruh
Did it damage the screen when you made that intro?
no
Can you make it a two shot shotgun?
Probably...but it would fire about 5 ft...
The funny thing about this intro is that he's trying to put a k26 into a stryfe
kirito TDM no, I am trying to put a k26 in a Rapidstrike. :P
Could you try to k-26 the Nerf rebel mini mischief?
It's a folding jolt, so I decided to make it into a camera looking gun, to make it even more sneaky
OMG VOID CASTER K26 snipers everywhere
Only if you stabilize it correctly ;)
Are you going to do a k26 on a regulator or whatever its called the one you can change the rate of fire on
...the regulator is a flywheel blaster...it does not have a spring...
Ohhh! Im a noob at this but can you increase its power like a K26. Also have you done that 3 in one modules?
Bill Barrett 1:yes, using upgraded batteries 2: IDK
Dear Captain X,
Hi, I really hope you read this, because I have an idea that I really want to try, but have no idea if it will work. Imagine this, aight, a drain blaster, with a brass breach sniper like attachment (including barrel and stock) that can be pumped up to pressure using a crank. I really wanna try it, not to shoot people but probably just to plink around with, but have no idea how... can you try it oh great and powerful nerf God?
(Disregard this if you just think it’s dumb and that a drain blaster is good enough as is)
When is ur b-day cause I want to send you something for your birthday but I cannot remember when it is?
+Barrbrostudios Feb 19th
Captain Xavier k thanks
Can you try to k26 a Buzzbee Jaguar
+dorito gaming again?
I'm sorry if you've already done it can you tell me which episode it was? I also want to say thanks for getting me in to Nerf modding. Actually today I went to Goodwill and found a jaguar and in put a Tak 4 spring into it
+dorito gaming just search "jaguar k26" it should show up.
Captain Xavier thanks captain
wait, do you mean a ship YOU were captain of, or a historical Captain Xavier was captain of? because I don't know of a historical captain Xavier, other than you.
No clues
Is that a plasma rifle from Halo?
No
I hope you meant pistol, because that would be a pitiful rifle.
I didn't name it man.
Captain Xavier! PLEASE DO RANGE TESTS AFTER PUTTING IN K26! PLS🤞
+J B I DID! I LITTERALLY SHOW THE NUMBERS IN THE VIDEO!
Captain Xavier No but like a firing demo so we can see as well.
+J B there is a noise, a dart flies away at an indeterinate speed for an indeterinate distance. Exactly the same for all blasters. I could use the same blaster everytime and it would make no difference. :P
Cap, you're taking for granted that some people must see all the things.
☎️⚙cool