Hello there Captain! My Unit-02 Nitefinder is still going strong. The catch is still holding up to the K26 spring and the paintjob is just the way you sent it! Quality craftsmanship! Also, good to know about the spring to use for the Shadow.
I have a theory on the nailbiter... theres no real "catch spring" since it fires at the back of the trigger pull. That probably means that the plunger spring releases at a point when sufficient releasing force is met. With a stronger plunger spring, the releasing force would be met much sooner, meaning no increase in force no matter how strong the spring. Could be wrong. Not a scientist, just a theory.
I would disagree. The catch mechanism is distance dependent and not force dependent. I however noticed it uses an o ring seal. Based on experience with my hammershot, an oring seal is not a good air seal and higher spring loads just cause more air to escape from there.
Regarding the Shadow ICS-6: That stupid little breech tube dealy that pushes the darts into the plunger tube is misaligned in mine due to variances in production, so some darts fishtail just enough to hit the top of the tube, consistently. This is exacerbated by the movement of the breech tube as it releases just as the dart is fired, and allows more time and opportunity for the tube to collide with the dart's overall length upon firing. To clarify, I mean that darts either fire normally, or predictably/consistently down and to the left with a noticeable loss in velocity. I suspect other Shadow owners must be experiencing erratic performance regardless of dart type.
cool thanks for this one. I still need to make something and add your Icon to it, was thinking on making a custom Stock out of wood to really hone in my roots/craft since my Father and GrandFather are craftsman.
A droog at DR had a fully kitted out nailbiter this last weekend. Brassed the clip entirely, improved the seals, running k26. With all that done, it still shot aboot 67fps.
Regarding the Nailbiter: I cut two sections of K25 in two different lengths. The first, the same length as the original in the Nailbiter, the second, long enough to fill the space between the plunger head and tube. The original length K25 gave me minimal performance increase to more consistent 60-70 fps (using fresh, standard elite darts in Chronobarrel on fresh Amazon alkalines). What the long spring does is forces the plunger tube to press harder against the clip and you get a better seal, and that goes to 85-90 for on same Cronobarrel setup. I highly suspect this blaster will benefit from simply filling the deadspace on the plunger rod with either a longer spring, or a spacer regardless of spring just because it forces a better seal. As far as that seal goes, between cycling rounds, the plunger tube does retract enough so that the seal isn't pressing hard on the clip as it sides up. I do imagine we'll replace these anyway. Note: putting the Chronobarrel fully on my stock Nailbiter appears to reset it from the shock of the internal action. Anyone else?
K26 seems too difficult for use in the Nailbiter for me. I plan to upgrade mine but something less though as Ive seen a few people do this and they taken it out already lol. Wow no difference? I didnt see that coming. Crazy.
Something I was considering was using floor polish to try and thicken/slim down the dart ports(?) its the magic fix all for loose action figures so technically it should work here. I'm basing this idea off of trying multiple types of darts. KO accustrikes are slightly slimmer than standard nerf darts and drop off at 20 feet where as nerf stay level the full range to the target. The main reason I think this will work is the third set that are generally crap except for the fact they are wider than normal darts and fit in very snugly giving them the best range yet and a satisfying pop sound. Think hammershot when you get a perfect fitting dart.
Yeah I found out that there is a system that retracts the foam seal and then that gets moved forward as the plunger tube is on the return, I guess it is used to help cycle to the next dart. All you have to do is shove something into the dead space behind the plunger tube to stop it from moving. The tricky part if I remember correctly is finding something that doesn't get in the way of the plunger rod. I used a catch spring from a broken blaster I had and it works fine. I got it to hit about 90 fps.
You can find them on most retail stores and their websites (I.E. Walmart, Target, etc.) I dunno if Amazon has it for MSRP or if it's all resale for double the price. Look around for good deals, see What You can find.
So I have noticed on Nfstrike they have a variety of springs on there and some of them are very unusual to me. For instance, they have some upgrade springs for several Rival springers (really heavy ones too), a 12kg spring for the Glowshot, a 12kg spring for the Rotofury, 4.5kg for the Rey/Han Solo blaster and I kid you not, a 12kg and 13kg spring for the Centurion. That's just a few examples, i'm sure I could name more. Anyways, I cannot find many reviews on ones like these, so you think maybe you can review some of these unusual springs they have Nfstrike? I'm incredibly curious to see how these work or if they even work at all because some of these seem a bit "far fetched" in my opinion.
The (very heavy) Rival springs work, or at least the 15kg Apollo and 18kg Atlas springs do. I wouldn't actually recommend putting the 15kg spring in an Apollo as it makes for a ludicrously heavy prime even with a pump kit installed, but the 18kg spring doesn't make the Atlas much harder to prime than the stock spring while offering a nice jump in performance (mine went from hitting 88 FPS on average to around 110). I haven't tried their 15kg springs for the Artemis or Hades, mostly because I don't need the headache that is disassembling and reassembling either of those in my life (also because keeping them stock means the fire rate with slam fire isn't diminished).
For the next episode, can you try a kind of dinky Zuru X-shot baster? I saw them at Wal-Mart, and the plunger tube seemed to be of appropriate size. I also briefly tinkered with one; removed the AR, and to my surprise, it hits fairly hard for its small size.
pastebin.com/6X89YAwe you can check all k26 results here. he's done quite a few x-shot blasters, you'll have to be specific. Also, the newer (white and blue) reflex 6 has a massive plunger tube, you can get a hefty spring in it, and the recoil is a fun little blaster.
Do a tier zero shadow ics 6. Do the tinting with those spray paints to match a sonic green longstrike. Put a pump grip on it and tint paint a clear worker stock to match. It’d be great for HvZ in my opinion.
I have a modded fire strike, and I had to make my own barrel out of pvc as I cant buy brass in the size needed around me, and I can load 2 into the barrel and fire them 1 at a time so maybe try putting a tightening ring on the barrel so you can have 2 shots? or maybe have it be a barrel attachment for Eir?
Does anybody know what the absolute largest plunger tube you could cram into the Nailbiter? I’d like to start modding some of my springers and the only one that isn’t all too common is the one mentioned.
Hey cap! What are your thoughts on the new worker hurricane? I really want to get one and run it with IMR's because I don't want to have to worry with lipo's and currently I don't have the money for lipo's.
I could see you and Out of Darts going in as teammates, him rocking a dual hurricanes, belt full of cartridges, with you backing him up with the flamethrowers
Didn't Walcom made a video about a specific spray can, allowing you to colour transparent plastic of your choice? Hence transparent orange is possible.
that second side of the stock is a destraction unit you put skittles in it the air holes let air flow trough so the scent can destract your local captian x wait you may not be the best person to use that with
With enough epoxy anything is possible. But it would not work. The plunger is too small to effectively fire rival. And the trigger pull is too short to prime a kronos plunger system.
Have you ever thought of making the Bulldog pump action? Even making it into a three dart shotgun? But it probably doesn’t have enough power even WITH k26 to fire all three that far.
Hello captain I was wondering if you could possibly do a mod guide on putting a barrel mount on the accustrike talonstrike because I want to put the modulus close quarters barrel on it
Oh and do you have a link to your main war blaster I know the name of her but don't know how to spell it because I want to know how to mod the stampede ecs-6 and paint it in my colors
I think he had has been asked this and addressed it a time or two, but no. His main use for Eir is HvZ, so he wants to keep the power down so as to not hurt anyone at close range. He was mainly referring to LiPo upgrades, but could be the same for powering the Titan with HPA.
Seeing that the beefier spring doesn't really do it any good, I now wonder: Could you get away with an even lighter spring and still achieve the 60-ish fps mark? Maybe the original spring is also overpowered for the internals. Imagine having an even easier draw on this blaster and still achieve acceptable results.... ❤️
Huh, I must be dreaming them. I’m sure I remember it being a very unsurprising no. I’ll have to go back and rewatch. Also, my reaction AFTER watching this one. Huh, well I’ll be damned.
Always a good video. I like the look of a nailbiter, but being Australian, the performance is horrible. The pastebin archive has been updated, thanks for the vid.
Humm what about air powered nail biter ...,also what about swapping the internals from one of the other styles built in mag blaster, example the star wars one...ooh.. mega Magnus internals.....hummm
so Captain do you support my future plan of making full blaster shells for existing custom stryfe and Retaliator/Prophecy internals that are injection molded : ARS, Designated Marksman Rifles, SMGS, Shotguns, Battle Rifles, Carbines, and Sniper Rifles
@@CaptainXavier but there's Assault rifles that have a burst fire option as a third choice over semi and full or just have burst and semi or burst and full auto: AK103 (has full auto,3 round burst and semi), AK105(full, 3 round, semi), M16A4 (3 round burst and semi), AKU12 (full auto, 3round burst, semi), M4A4(3 round burst and semi), AN94 (2 round burst, full auto), FAMAS (full auto, semi, 3 round burst), AK12(full auto, 3 round burst, semi), AK12BR(full auto, 2 round burst, semi), BEOWULF ECR(full auto, 3 round burst, semi), RPK12 (full auto,3round burst, semi), these all need stryfe select fire kits meant for each one specifically the AN94, AK12BR, and the RPK12 those are the only 3 that require 2 round burst select fire stryfe kits
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Hello there Captain! My Unit-02 Nitefinder is still going strong. The catch is still holding up to the K26 spring and the paintjob is just the way you sent it! Quality craftsmanship! Also, good to know about the spring to use for the Shadow.
Unit 02 as in... Eva?
Ah, a fellow Eva geek?
LeonMaddox1 yup
A use for hammershot springs! The time has come!
nanagames derp put a hammer shot spring in a jolt it kicks like a. Truck
@@bagelbites4204 unnecessary period.
Bananamations if he had an iPhone he probably just accidentally tapped space twice
@@treysonthelusma3408 it also does that on most samsung phones
I have a theory on the nailbiter... theres no real "catch spring" since it fires at the back of the trigger pull. That probably means that the plunger spring releases at a point when sufficient releasing force is met. With a stronger plunger spring, the releasing force would be met much sooner, meaning no increase in force no matter how strong the spring.
Could be wrong. Not a scientist, just a theory.
That was exactly what I was I thinking. But I am also no scientist.
I would disagree. The catch mechanism is distance dependent and not force dependent. I however noticed it uses an o ring seal. Based on experience with my hammershot, an oring seal is not a good air seal and higher spring loads just cause more air to escape from there.
Its just a theory, a Nerf THEORY
A *game theory*
@@billbolor9142 no its nerf theory
Mod challenge: Nailbiter shell, BOOMco air based internals and a 40 round replaceable clip.
Last bonus route it to a replaceable air tank.
Sound like a souped up magstrike
The nail biter is so beautiful. Love how it looks
I'm convinced that Hasbro made the Shadow ICS-6 with the intention of pissing off Nerf modders
At least it is not glued and clipped together.
@@mechanwhal6590 true
Regarding the Shadow ICS-6:
That stupid little breech tube dealy that pushes the darts into the plunger tube is misaligned in mine due to variances in production, so some darts fishtail just enough to hit the top of the tube, consistently.
This is exacerbated by the movement of the breech tube as it releases just as the dart is fired, and allows more time and opportunity for the tube to collide with the dart's overall length upon firing.
To clarify, I mean that darts either fire normally, or predictably/consistently down and to the left with a noticeable loss in velocity.
I suspect other Shadow owners must be experiencing erratic performance regardless of dart type.
cool thanks for this one. I still need to make something and add your Icon to it, was thinking on making a custom Stock out of wood to really hone in my roots/craft since my Father and GrandFather are craftsman.
I like that that spring upgrade on the shadow puts it right on par with stock Buzz Bee blasters....
thank you for doing the nailbiter captain
THANK you for saying 1/3 increase and not 25% increase. You're one of few to get that right, lol.
I have a BS in Computer Science. Involves a lot of math classes...
the extra storage in the zoom & doom stock could probably hold a Rigid wallet!
Missed a good opportunity
I love that you put a k26 in the nailbiter i put one in mine already and it shoots hard. love the videos keep up the good work!
A droog at DR had a fully kitted out nailbiter this last weekend. Brassed the clip entirely, improved the seals, running k26. With all that done, it still shot aboot 67fps.
...so all that work...for 5 extra fps?...
Yup. He encouraged us not to bother, and use it in stock form. Nice that someone else has done the work to save us the trouble.
Right?
You could put a K26 in a nailbiter if you want to use it as a hand exerciser.
Regarding the Nailbiter: I cut two sections of K25 in two different lengths. The first, the same length as the original in the Nailbiter, the second, long enough to fill the space between the plunger head and tube.
The original length K25 gave me minimal performance increase to more consistent 60-70 fps (using fresh, standard elite darts in Chronobarrel on fresh Amazon alkalines).
What the long spring does is forces the plunger tube to press harder against the clip and you get a better seal, and that goes to 85-90 for on same Cronobarrel setup.
I highly suspect this blaster will benefit from simply filling the deadspace on the plunger rod with either a longer spring, or a spacer regardless of spring just because it forces a better seal.
As far as that seal goes, between cycling rounds, the plunger tube does retract enough so that the seal isn't pressing hard on the clip as it sides up. I do imagine we'll replace these anyway.
Note: putting the Chronobarrel fully on my stock Nailbiter appears to reset it from the shock of the internal action. Anyone else?
K26 seems too difficult for use in the Nailbiter for me. I plan to upgrade mine but something less though as Ive seen a few people do this and they taken it out already lol.
Wow no difference? I didnt see that coming. Crazy.
It needed brass in the clip
An after burner attachment kit could be all it needs to really take off. That is what I plan on doing with mine.
Perhaps you could double up on the spring?
Something I was considering was using floor polish to try and thicken/slim down the dart ports(?) its the magic fix all for loose action figures so technically it should work here. I'm basing this idea off of trying multiple types of darts. KO accustrikes are slightly slimmer than standard nerf darts and drop off at 20 feet where as nerf stay level the full range to the target. The main reason I think this will work is the third set that are generally crap except for the fact they are wider than normal darts and fit in very snugly giving them the best range yet and a satisfying pop sound. Think hammershot when you get a perfect fitting dart.
I would love to see somone chop off the ICS part of the Shadow and make that bad boy take mags. Looks like you could make it a pump as well
my fav episode
like these blasters
and my favorite word from sponsor.
Yeah I found out that there is a system that retracts the foam seal and then that gets moved forward as the plunger tube is on the return, I guess it is used to help cycle to the next dart. All you have to do is shove something into the dead space behind the plunger tube to stop it from moving. The tricky part if I remember correctly is finding something that doesn't get in the way of the plunger rod. I used a catch spring from a broken blaster I had and it works fine. I got it to hit about 90 fps.
The shadow ICS-6 is basically an oversized Jolt... (that plunger tube is the same as that found on a jolt...)
Love the Viking beard!👊
Holy crap, you actually made the Shadow better!
when I got this blaster I was joyus about this but seeing the internals I realized it could be smaller, still love it though...
The Shadow ICS-6 is a great parts bin
Shadow ics-6 the death of walcom
I love his channel, but I felt bad for him. The shadow just ruined the poor man.
The unprimed system came from the speedload 6 ? in the dart tag line which also holds 6darts
Where did you get the nail biter? I want one and without good enough reason i cant leav my house in this weather and how much was it?
You can find them on most retail stores and their websites (I.E. Walmart, Target, etc.) I dunno if Amazon has it for MSRP or if it's all resale for double the price. Look around for good deals, see What You can find.
I got mine at Target, I think.
@@JayceAndMarco ok thanks
They everywherw
So I have noticed on Nfstrike they have a variety of springs on there and some of them are very unusual to me. For instance, they have some upgrade springs for several Rival springers (really heavy ones too), a 12kg spring for the Glowshot, a 12kg spring for the Rotofury, 4.5kg for the Rey/Han Solo blaster and I kid you not, a 12kg and 13kg spring for the Centurion. That's just a few examples, i'm sure I could name more.
Anyways, I cannot find many reviews on ones like these, so you think maybe you can review some of these unusual springs they have Nfstrike? I'm incredibly curious to see how these work or if they even work at all because some of these seem a bit "far fetched" in my opinion.
The (very heavy) Rival springs work, or at least the 15kg Apollo and 18kg Atlas springs do. I wouldn't actually recommend putting the 15kg spring in an Apollo as it makes for a ludicrously heavy prime even with a pump kit installed, but the 18kg spring doesn't make the Atlas much harder to prime than the stock spring while offering a nice jump in performance (mine went from hitting 88 FPS on average to around 110).
I haven't tried their 15kg springs for the Artemis or Hades, mostly because I don't need the headache that is disassembling and reassembling either of those in my life (also because keeping them stock means the fire rate with slam fire isn't diminished).
For the next episode, can you try a kind of dinky Zuru X-shot baster? I saw them at Wal-Mart, and the plunger tube seemed to be of appropriate size. I also briefly tinkered with one; removed the AR, and to my surprise, it hits fairly hard for its small size.
pastebin.com/6X89YAwe you can check all k26 results here. he's done quite a few x-shot blasters, you'll have to be specific. Also, the newer (white and blue) reflex 6 has a massive plunger tube, you can get a hefty spring in it, and the recoil is a fun little blaster.
Do a tier zero shadow ics 6. Do the tinting with those spray paints to match a sonic green longstrike. Put a pump grip on it and tint paint a clear worker stock to match. It’d be great for HvZ in my opinion.
R.I.P walcom's Shadow ICS-6
he doesn't have any idea how to put internals back together
I have a modded fire strike, and I had to make my own barrel out of pvc as I cant buy brass in the size needed around me, and I can load 2 into the barrel and fire them 1 at a time so maybe try putting a tightening ring on the barrel so you can have 2 shots? or maybe have it be a barrel attachment for Eir?
What spring was that did you use for the catch ?
One from the bin. Probably Fastenal #155.
Does anybody know what the absolute largest plunger tube you could cram into the Nailbiter? I’d like to start modding some of my springers and the only one that isn’t all too common is the one mentioned.
I just subbed your vids are dope love the mods
Hey cap! What are your thoughts on the new worker hurricane? I really want to get one and run it with IMR's because I don't want to have to worry with lipo's and currently I don't have the money for lipo's.
They are awesome! I want 2.
Only 2? Ah yes, the magazine cartridges are available seperately.. So how many of those will you have for the 2?
Not sure. They would be secondaries so I am not overly worried about reloading them in a hurry. At least 1 spare cartridge each though.
Personally I'm not going to get any spare mags right off the bat. I just need it as a quick spammer in case it gets hairy
I could see you and Out of Darts going in as teammates, him rocking a dual hurricanes, belt full of cartridges, with you backing him up with the flamethrowers
Didn't Walcom made a video about a specific spray can, allowing you to colour transparent plastic of your choice? Hence transparent orange is possible.
yes...and I have done videos of blasters I have made translucent orange...
that second side of the stock is a destraction unit you put skittles in it the air holes let air flow trough so the scent can destract your local captian x wait you may not be the best person to use that with
If you main a k26 nail biter your grip strength will be on another level.
Mon capitan. I am almost ready to battle! Thanks, in most part, to you and your friends
I wonder if Cap has gigabytes of stock footage of Luke just saying random things in his hard drive, just waiting in the wings for k26 videos?
Not gigs. Maybe megs.
I personally find strongarm springs to be a far better spring for the nailbiter it has an easier prime with about just as much if not more power
I wonder how beefo a hammershot spring would work in the Blaster...
Captain, do you just have a stockpile of one-word clips from OutOfDarts?
Yes
@@CaptainXavier you should use those very, highly, precious resources and make a video just of those
I wonder if you could modify nail biter internals to go in a Kronos
With enough epoxy anything is possible. But it would not work. The plunger is too small to effectively fire rival. And the trigger pull is too short to prime a kronos plunger system.
Is there a flywheel sk26 equivalent you could make your own series on that
You can turn the barrel light into a flashlight with tape
Have you ever thought of making the Bulldog pump action? Even making it into a three dart shotgun? But it probably doesn’t have enough power even WITH k26 to fire all three that far.
Hey Captain, you mentioned Fastenal 155 as your go-to catch spring. Is that 155 A, B, or C? I'm curios as I'd like to beef up my catch spring stock.
No idea. I was sent so much of it by a fan I have never had to order any. Buy all three and find out?
I love the thing Mr Luke does!😂😂
Hello captain I was wondering if you could possibly do a mod guide on putting a barrel mount on the accustrike talonstrike because I want to put the modulus close quarters barrel on it
Well, I don't have one so...no. But it should be simple enough. You will need a barrel attachment point, some barrel and some glue. Apply logically.
Oh and do you have a link to your main war blaster I know the name of her but don't know how to spell it because I want to know how to mod the stampede ecs-6 and paint it in my colors
EIR is the name
Thank you
Walcom hates the Shadow ICS-6
I love nailbiter soo much I have 2 of them and dual wield them to events. Where I get shredded
The issue is the barrel fit.
Just by adding some nubs of brass would fix it.
Could you modify it to use mags??
With enough epoxy anything is possible.
The Nailbiter one is odd, I gave mine a bit of a spring upgrade and it went up from 55-ish to 70-ish
Where can you get that catch spring?
Fastenal. #155
That's a cool new Intro😂
if you turn the nail biter barrel into a breach, i would definitely like to see that video to see how you do it and what comes of it
Definitely need to get me a modded ics 6. I have a thing for the internal mags, and it would go great with my ice blue magnus.
16:14 aww heck got to buy peanut butter now
Send help, the rev switch on my Hyperfire is stuck in the on position will WD40 help or do you have another suggestion
The switch itself or the plastic part that your press?
Captain Xavier the switch itself
No idea. Supposedly WD-40 does not conduct electricity. But honestly you are probably better off replacing the switch entirely.
Alrighty, where do you recommend I get my new switch from?
OutOfDarts.com
The shadow is the most overdesign piece of ****, the barrel is short as well.
*PEANUT BUTTER*
Could that feature on the shadow be removed so you can load when its primed
No.
My nailbiter had problems with shooting so I finally fixed it
What are some good mods for a rayvenfire
...the usual flywheel upgrades...wheels, cage, motors, rewire, LiPo.
Did you see Walcom's autopsy on the Shadow?
Nope
Poor guy. The shadow ruined his mind.
Do beware k26 in the nailbiter, Walcom had a catastrophic failure of his blaster with k26.
Good to know.
Are you able to make brass breaches now
I have mastered some. But not all.
Have you ever thought about upgrading Eir with HPA tanks?
I think he had has been asked this and addressed it a time or two, but no. His main use for Eir is HvZ, so he wants to keep the power down so as to not hurt anyone at close range. He was mainly referring to LiPo upgrades, but could be the same for powering the Titan with HPA.
The circle cutter thing is meant for breaking off locks on doors, in real firearms that is.
Seeing that the beefier spring doesn't really do it any good, I now wonder: Could you get away with an even lighter spring and still achieve the 60-ish fps mark? Maybe the original spring is also overpowered for the internals.
Imagine having an even easier draw on this blaster and still achieve acceptable results.... ❤️
According to at least one person in the comments, yes.
Can an x-shot regenerator take a k26?
No idea, I have never seen one in the wild. :(
I really want a nailbiter, they seem cool. (But only with all of the attachments
Before watching the video.
Based on the fact that the Voidcaster was a no, I’m gonna say the Nailbiter is also a no. No expectations for the Shadow.
...yeah...except the void caster was a yes...so...
Huh, I must be dreaming them. I’m sure I remember it being a very unsurprising no. I’ll have to go back and rewatch. Also, my reaction AFTER watching this one.
Huh, well I’ll be damned.
After going back and watching episode 59.
Well I’ll be damned. And I look twice as silly as before.
;P It happens
Forgot what walcom did with his nail biter so this'll be a surprise for me haha
YAAAAAAS I’ve waited so long for this! It’s gonna he great!!!
Reporting in sir!
Was kinda disappointed when I found out the clip on the nailgun wasn't doublestack tbh. Still really cool though!
Hi love your channel can a rampage a k26
It cannot
ruclips.net/video/ON3WHDalfu8/видео.html
Epic intro.
Walcom's nail biter broke with k26
Why would anyone in their right mind use a k26 for their nailbiter?
It's not black and orange. It's Black and Decker.
Probably The AR is The problem. It makes your blaster weaker.
I wonder what the Shadow would do with an upgrade Hammershot spring? One of those 8kg or 10kg ones.
Probably break...but you never know until you try.
Excellent sponsor
I love that intro lol
We need a rival zombie strike line.
I think a springer with a k26 is better than a rapidstrike
Always a good video. I like the look of a nailbiter, but being Australian, the performance is horrible. The pastebin archive has been updated, thanks for the vid.
im so early [14 minutes after posting] that i can finally make this joke, and that the youtube recommendation stuff isnt working yet
Hello captain how are you today? I recently modded my buzz bee double shot which is lovely.
Too early to tell...
@@CaptainXavier ok
@@CaptainXavier Can a double shot take a k26?
No
@@CaptainXavier Awwww alright thanks for telling me so I don't waste my time trying to take it in.
Humm what about air powered nail biter ...,also what about swapping the internals from one of the other styles built in mag blaster, example the star wars one...ooh.. mega Magnus internals.....hummm
New year new intro
so Captain do you support my future plan of making full blaster shells for existing custom stryfe and Retaliator/Prophecy internals that are injection molded : ARS, Designated Marksman Rifles, SMGS, Shotguns, Battle Rifles, Carbines, and Sniper Rifles
Sure, go for it.
@@CaptainXavier but there's Assault rifles that have a burst fire option as a third choice over semi and full or just have burst and semi or burst and full auto: AK103 (has full auto,3 round burst and semi), AK105(full, 3 round, semi), M16A4 (3 round burst and semi), AKU12 (full auto, 3round burst, semi), M4A4(3 round burst and semi), AN94 (2 round burst, full auto), FAMAS (full auto, semi, 3 round burst), AK12(full auto, 3 round burst, semi), AK12BR(full auto, 2 round burst, semi), BEOWULF ECR(full auto, 3 round burst, semi), RPK12 (full auto,3round burst, semi), these all need stryfe select fire kits meant for each one specifically the AN94, AK12BR, and the RPK12 those are the only 3 that require 2 round burst select fire stryfe kits
If I get one, I'm gonna fix up that trigger.
That trigger is *DUMMY THICC*
The intent to the trigger is because you gotta press it with three fingers to give enough force to fire
I love when people forget to edit out a retake lol
Oh, which part did I leave in?
@@CaptainXavier when you tested the nailbiter you did it once, stumbled, and did it again lol
Well what do you know...I did. Oh well.