Happy to help. Comments like this keep me going! Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports
This comment confuses me, but I always like a positive comment. Thanks for watching. Check out: ruclips.net/video/d6viG-C0RZk/видео.html for more beautiful places!
The torque is worth paying attention to on the bearing cover fine thread bolts... If it falls out, even with lock tite, it will flutter around after loosening at higher speeds and temps, shredding everything inside as the air circulation fins turn into a
I just changed my oil in a 450 Grizzly. I took it out for a 1/4 mile ride. I then realized I used auto synthetic. What should I do now? Can I just change the oil with Yamalube, or do I need to flush it.
Hey man I took my 22m off my secondary (kodaik700) to take a peek at the spring and it won't go back on the shaft all the way, I didn't take the 47mm nut off the spring so I'm wondering how the spring de compressed???
Have a question its basically the same as a rhino 660 the problem I'm having is installing the new fixed sheave I cant get it on the splines of the shaft is there a trick to it. Thanks
hey guys i just went through this. there are motor mount bolts that are sized specifically for that purpose. i found it in a youtube comment one day! this guy is the best for videos. raptor motors are the same fyi ruclips.net/video/ve2G3EnsrbA/видео.html
Everything is looking real nice😊I always like when food 😋 is cooked 🍳 😅
Very nice construction and Craftsmanship 😊 !! Well done 👏 ✔️ 👍 Sir
Happy to help. Comments like this keep me going! Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports
Yall have a beautiful place !! Nice job on barrel stove kit 👌 😊
This comment confuses me, but I always like a positive comment. Thanks for watching. Check out: ruclips.net/video/d6viG-C0RZk/видео.html for more beautiful places!
Sorry Sir !! That was meant for another Utuber !! LOL
The torque is worth paying attention to on the bearing cover fine thread bolts...
If it falls out, even with lock tite, it will flutter around after loosening at higher speeds and temps, shredding everything inside as the air circulation fins turn into a
Agreed. Great reminder. Thanks for watching and the comment. Let us know if you need anything: www.ebay.com/str/midnebraskamotorsports
I just changed my oil in a 450 Grizzly. I took it out for a 1/4 mile ride. I then realized I used auto synthetic.
What should I do now? Can I just change the oil with Yamalube, or do I need to flush it.
What’s the easiest way to replace to oil pump....you have to split the case? That just seems crazy?
is the process the same for a 350 grizzly ???
can you do the front and rear diffs ??? that would be great
Does 98 grizzly have a cage?
Hey man I took my 22m off my secondary (kodaik700) to take a peek at the spring and it won't go back on the shaft all the way, I didn't take the 47mm nut off the spring so I'm wondering how the spring de compressed???
Have a question its basically the same as a rhino 660 the problem I'm having is installing the new fixed sheave I cant get it on the splines of the shaft is there a trick to it. Thanks
I have a kodiak 450. Belt is getting way too tight then it stalls out
eine Frage wie hast du die Schraube von der secondary gelöst...ohne blockier Werkzeug?
what is the size of the nut that holds the secondary spring in place?
Where do you get the 2 bolts for the secondary sheave
hey guys i just went through this. there are motor mount bolts that are sized specifically for that purpose. i found it in a youtube comment one day! this guy is the best for videos. raptor motors are the same fyi ruclips.net/video/ve2G3EnsrbA/видео.html
Need the same info.
From the cover
fuuuuuuck. that is what happened to me. i put the nut on a yar a go and the clutch came off. not good
You never showed how to shim driven clutch like it stated you would